[−][src]Struct nrf52832_hal::pac::i2s::RegisterBlock

#[repr(C)]pub struct RegisterBlock {
    pub tasks_start: Reg<u32, _TASKS_START>,
    pub tasks_stop: Reg<u32, _TASKS_STOP>,
    pub events_rxptrupd: Reg<u32, _EVENTS_RXPTRUPD>,
    pub events_stopped: Reg<u32, _EVENTS_STOPPED>,
    pub events_txptrupd: Reg<u32, _EVENTS_TXPTRUPD>,
    pub inten: Reg<u32, _INTEN>,
    pub intenset: Reg<u32, _INTENSET>,
    pub intenclr: Reg<u32, _INTENCLR>,
    pub enable: Reg<u32, _ENABLE>,
    pub config: CONFIG,
    pub rxd: RXD,
    pub txd: TXD,
    pub rxtxd: RXTXD,
    pub psel: PSEL,
    // some fields omitted
}

Register block

Fields

tasks_start: Reg<u32, _TASKS_START>

0x00 - Starts continuous I2S transfer. Also starts MCK generator when this is enabled.

tasks_stop: Reg<u32, _TASKS_STOP>

0x04 - Stops I2S transfer. Also stops MCK generator. Triggering this task will cause the {event:STOPPED} event to be generated.

events_rxptrupd: Reg<u32, _EVENTS_RXPTRUPD>

0x104 - The RXD.PTR register has been copied to internal double-buffers. When the I2S module is started and RX is enabled, this event will be generated for every RXTXD.MAXCNT words that are received on the SDIN pin.

events_stopped: Reg<u32, _EVENTS_STOPPED>

0x108 - I2S transfer stopped.

events_txptrupd: Reg<u32, _EVENTS_TXPTRUPD>

0x114 - The TDX.PTR register has been copied to internal double-buffers. When the I2S module is started and TX is enabled, this event will be generated for every RXTXD.MAXCNT words that are sent on the SDOUT pin.

inten: Reg<u32, _INTEN>

0x300 - Enable or disable interrupt

intenset: Reg<u32, _INTENSET>

0x304 - Enable interrupt

intenclr: Reg<u32, _INTENCLR>

0x308 - Disable interrupt

enable: Reg<u32, _ENABLE>

0x500 - Enable I2S module.

config: CONFIG

0x504 - Unspecified

rxd: RXD

0x538 - Unspecified

txd: TXD

0x540 - Unspecified

rxtxd: RXTXD

0x550 - Unspecified

psel: PSEL

0x560 - Unspecified

Auto Trait Implementations

Blanket Implementations

impl<T> Any for T where
    T: 'static + ?Sized, [src]

impl<T> Borrow<T> for T where
    T: ?Sized, [src]

impl<T> BorrowMut<T> for T where
    T: ?Sized, [src]

impl<T> From<T> for T[src]

impl<T, U> Into<U> for T where
    U: From<T>, [src]

impl<T> Same<T> for T

type Output = T

Should always be Self

impl<T, U> TryFrom<U> for T where
    U: Into<T>, [src]

type Error = Infallible

The type returned in the event of a conversion error.

impl<T, U> TryInto<U> for T where
    U: TryFrom<T>, [src]

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.