[−][src]Struct nrf52832_hal::pac::uart0::RegisterBlock

#[repr(C)]pub struct RegisterBlock {
    pub tasks_startrx: Reg<u32, _TASKS_STARTRX>,
    pub tasks_stoprx: Reg<u32, _TASKS_STOPRX>,
    pub tasks_starttx: Reg<u32, _TASKS_STARTTX>,
    pub tasks_stoptx: Reg<u32, _TASKS_STOPTX>,
    pub tasks_suspend: Reg<u32, _TASKS_SUSPEND>,
    pub events_cts: Reg<u32, _EVENTS_CTS>,
    pub events_ncts: Reg<u32, _EVENTS_NCTS>,
    pub events_rxdrdy: Reg<u32, _EVENTS_RXDRDY>,
    pub events_txdrdy: Reg<u32, _EVENTS_TXDRDY>,
    pub events_error: Reg<u32, _EVENTS_ERROR>,
    pub events_rxto: Reg<u32, _EVENTS_RXTO>,
    pub shorts: Reg<u32, _SHORTS>,
    pub intenset: Reg<u32, _INTENSET>,
    pub intenclr: Reg<u32, _INTENCLR>,
    pub errorsrc: Reg<u32, _ERRORSRC>,
    pub enable: Reg<u32, _ENABLE>,
    pub pselrts: Reg<u32, _PSELRTS>,
    pub pseltxd: Reg<u32, _PSELTXD>,
    pub pselcts: Reg<u32, _PSELCTS>,
    pub pselrxd: Reg<u32, _PSELRXD>,
    pub rxd: Reg<u32, _RXD>,
    pub txd: Reg<u32, _TXD>,
    pub baudrate: Reg<u32, _BAUDRATE>,
    pub config: Reg<u32, _CONFIG>,
    // some fields omitted
}

Register block

Fields

tasks_startrx: Reg<u32, _TASKS_STARTRX>

0x00 - Start UART receiver

tasks_stoprx: Reg<u32, _TASKS_STOPRX>

0x04 - Stop UART receiver

tasks_starttx: Reg<u32, _TASKS_STARTTX>

0x08 - Start UART transmitter

tasks_stoptx: Reg<u32, _TASKS_STOPTX>

0x0c - Stop UART transmitter

tasks_suspend: Reg<u32, _TASKS_SUSPEND>

0x1c - Suspend UART

events_cts: Reg<u32, _EVENTS_CTS>

0x100 - CTS is activated (set low). Clear To Send.

events_ncts: Reg<u32, _EVENTS_NCTS>

0x104 - CTS is deactivated (set high). Not Clear To Send.

events_rxdrdy: Reg<u32, _EVENTS_RXDRDY>

0x108 - Data received in RXD

events_txdrdy: Reg<u32, _EVENTS_TXDRDY>

0x11c - Data sent from TXD

events_error: Reg<u32, _EVENTS_ERROR>

0x124 - Error detected

events_rxto: Reg<u32, _EVENTS_RXTO>

0x144 - Receiver timeout

shorts: Reg<u32, _SHORTS>

0x200 - Shortcut register

intenset: Reg<u32, _INTENSET>

0x304 - Enable interrupt

intenclr: Reg<u32, _INTENCLR>

0x308 - Disable interrupt

errorsrc: Reg<u32, _ERRORSRC>

0x480 - Error source

enable: Reg<u32, _ENABLE>

0x500 - Enable UART

pselrts: Reg<u32, _PSELRTS>

0x508 - Pin select for RTS

pseltxd: Reg<u32, _PSELTXD>

0x50c - Pin select for TXD

pselcts: Reg<u32, _PSELCTS>

0x510 - Pin select for CTS

pselrxd: Reg<u32, _PSELRXD>

0x514 - Pin select for RXD

rxd: Reg<u32, _RXD>

0x518 - RXD register

txd: Reg<u32, _TXD>

0x51c - TXD register

baudrate: Reg<u32, _BAUDRATE>

0x524 - Baud rate

config: Reg<u32, _CONFIG>

0x56c - Configuration of parity and hardware flow control

Auto Trait Implementations

Blanket Implementations

impl<T> Any for T where
    T: 'static + ?Sized, [src]

impl<T> Borrow<T> for T where
    T: ?Sized, [src]

impl<T> BorrowMut<T> for T where
    T: ?Sized, [src]

impl<T> From<T> for T[src]

impl<T, U> Into<U> for T where
    U: From<T>, [src]

impl<T> Same<T> for T

type Output = T

Should always be Self

impl<T, U> TryFrom<U> for T where
    U: Into<T>, [src]

type Error = Infallible

The type returned in the event of a conversion error.

impl<T, U> TryInto<U> for T where
    U: TryFrom<T>, [src]

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.