Struct nom::lib::std::mem::ManuallyDrop

#[lang = "manually_drop"]
#[repr(transparent)]pub struct ManuallyDrop<T> where
    T: ?Sized,  { /* fields omitted */ }

A wrapper to inhibit compiler from automatically calling T’s destructor. This wrapper is 0-cost.

ManuallyDrop<T> is subject to the same layout optimizations as T. As a consequence, it has no effect on the assumptions that the compiler makes about its contents. For example, initializing a ManuallyDrop<&mut T> with mem::zeroed is undefined behavior. If you need to handle uninitialized data, use MaybeUninit<T> instead.

Note that accessing the value inside a ManuallyDrop<T> is safe. This means that a ManuallyDrop<T> whose content has been dropped must not be exposed through a public safe API. Correspondingly, ManuallyDrop::drop is unsafe.

ManuallyDrop and drop order.

Rust has a well-defined drop order of values. To make sure that fields or locals are dropped in a specific order, reorder the declarations such that the implicit drop order is the correct one.

It is possible to use ManuallyDrop to control the drop order, but this requires unsafe code and is hard to do correctly in the presence of unwinding.

For example, if you want to make sure that a specific field is dropped after the others, make it the last field of a struct:

struct Context;

struct Widget {
    children: Vec<Widget>,
    // `context` will be dropped after `children`.
    // Rust guarantees that fields are dropped in the order of declaration.
    context: Context,
}

Implementations

impl<T> ManuallyDrop<T>

#[must_use = "if you don't need the wrapper, you can use `mem::forget` instead"]pub const fn new(value: T) -> ManuallyDrop<T>

Wrap a value to be manually dropped.

Examples

use std::mem::ManuallyDrop;
let mut x = ManuallyDrop::new(String::from("Hello World!"));
x.truncate(5); // You can still safely operate on the value
assert_eq!(*x, "Hello");
// But `Drop` will not be run here

pub const fn into_inner(slot: ManuallyDrop<T>) -> T

Extracts the value from the ManuallyDrop container.

This allows the value to be dropped again.

Examples

use std::mem::ManuallyDrop;
let x = ManuallyDrop::new(Box::new(()));
let _: Box<()> = ManuallyDrop::into_inner(x); // This drops the `Box`.

#[must_use = "if you don't need the value, you can use `ManuallyDrop::drop` instead"]pub unsafe fn take(slot: &mut ManuallyDrop<T>) -> T

Takes the value from the ManuallyDrop<T> container out.

This method is primarily intended for moving out values in drop. Instead of using ManuallyDrop::drop to manually drop the value, you can use this method to take the value and use it however desired.

Whenever possible, it is preferable to use into_inner instead, which prevents duplicating the content of the ManuallyDrop<T>.

Safety

This function semantically moves out the contained value without preventing further usage, leaving the state of this container unchanged. It is your responsibility to ensure that this ManuallyDrop is not used again.

impl<T> ManuallyDrop<T> where
    T: ?Sized, 

pub unsafe fn drop(slot: &mut ManuallyDrop<T>)

Manually drops the contained value. This is exactly equivalent to calling ptr::drop_in_place with a pointer to the contained value. As such, unless the contained value is a packed struct, the destructor will be called in-place without moving the value, and thus can be used to safely drop pinned data.

If you have ownership of the value, you can use ManuallyDrop::into_inner instead.

Safety

This function runs the destructor of the contained value. Other than changes made by the destructor itself, the memory is left unchanged, and so as far as the compiler is concerned still holds a bit-pattern which is valid for the type T.

However, this "zombie" value should not be exposed to safe code, and this function should not be called more than once. To use a value after it's been dropped, or drop a value multiple times, can cause Undefined Behavior (depending on what drop does). This is normally prevented by the type system, but users of ManuallyDrop must uphold those guarantees without assistance from the compiler.

Trait Implementations

impl<T> Clone for ManuallyDrop<T> where
    T: Clone + ?Sized, 

pub fn clone(&self) -> ManuallyDrop<T>

Returns a copy of the value.

pub fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<T> Copy for ManuallyDrop<T> where
    T: Copy + ?Sized, 

impl<T> Debug for ManuallyDrop<T> where
    T: Debug + ?Sized, 

pub fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl<T> Default for ManuallyDrop<T> where
    T: Default + ?Sized, 

pub fn default() -> ManuallyDrop<T>

Returns the "default value" for a type.

impl<T> Deref for ManuallyDrop<T> where
    T: ?Sized, 

type Target = T

The resulting type after dereferencing.

pub fn deref(&self) -> &T

Dereferences the value.

impl<T> DerefMut for ManuallyDrop<T> where
    T: ?Sized, 

pub fn deref_mut(&mut self) -> &mut T

Mutably dereferences the value.

impl<T> Eq for ManuallyDrop<T> where
    T: Eq + ?Sized, 

impl<T> Hash for ManuallyDrop<T> where
    T: Hash + ?Sized, 

pub fn hash<__H>(&self, state: &mut __H) where
    __H: Hasher, 

Feeds this value into the given Hasher.

pub fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher, 

Feeds a slice of this type into the given Hasher.

impl<T> Ord for ManuallyDrop<T> where
    T: Ord + ?Sized, 

pub fn cmp(&self, other: &ManuallyDrop<T>) -> Ordering

This method returns an Ordering between self and other.

#[must_use]pub fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]pub fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]pub fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl<T> PartialEq<ManuallyDrop<T>> for ManuallyDrop<T> where
    T: PartialEq<T> + ?Sized, 

pub fn eq(&self, other: &ManuallyDrop<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.

pub fn ne(&self, other: &ManuallyDrop<T>) -> bool

This method tests for !=.

impl<T> PartialOrd<ManuallyDrop<T>> for ManuallyDrop<T> where
    T: PartialOrd<T> + ?Sized, 

pub fn partial_cmp(&self, other: &ManuallyDrop<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]pub fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]pub fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]pub fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]pub fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<T> StructuralEq for ManuallyDrop<T> where
    T: ?Sized, 

impl<T> StructuralPartialEq for ManuallyDrop<T> where
    T: ?Sized,