Type Definition nalgebra::base::OMatrix

type OMatrix<T, R, C> = Matrix<T, R, C, Owned<T, R, C>>;

An owned matrix column-major matrix with R rows and C columns.

Because this is an alias, not all its methods are listed here. See the Matrix type too.

Implementations

impl<T, D: DimName> OMatrix<T, D, D> where
    T: Scalar + Zero + One,
    DefaultAllocator: Allocator<T, D, D>, 

Translation and scaling in any dimension

pub fn new_scaling(scaling: T) -> Self

Creates a new homogeneous matrix that applies the same scaling factor on each dimension.

pub fn new_nonuniform_scaling<SB>(
    scaling: &Vector<T, DimNameDiff<D, U1>, SB>
) -> Self where
    D: DimNameSub<U1>,
    SB: Storage<T, DimNameDiff<D, U1>>, 

Creates a new homogeneous matrix that applies a distinct scaling factor for each dimension.

pub fn new_translation<SB>(
    translation: &Vector<T, DimNameDiff<D, U1>, SB>
) -> Self where
    D: DimNameSub<U1>,
    SB: Storage<T, DimNameDiff<D, U1>>, 

Creates a new homogeneous matrix that applies a pure translation.

impl<T: Scalar, R: Dim, C: Dim> OMatrix<T, R, C> where
    DefaultAllocator: Allocator<T, R, C>, 

Generic constructors

This set of matrix and vector construction functions are all generic with-regard to the matrix dimensions. They all expect to be given the dimension as inputs.

These functions should only be used when working on dimension-generic code.

pub unsafe fn new_uninitialized_generic(nrows: R, ncols: C) -> MaybeUninit<Self>

Creates a new uninitialized matrix. If the matrix has a compile-time dimension, this panics if nrows != R::to_usize() or ncols != C::to_usize().

pub fn from_element_generic(nrows: R, ncols: C, elem: T) -> Self

Creates a matrix with all its elements set to elem.

pub fn repeat_generic(nrows: R, ncols: C, elem: T) -> Self

Creates a matrix with all its elements set to elem.

Same as from_element_generic.

pub fn zeros_generic(nrows: R, ncols: C) -> Self where
    T: Zero, 

Creates a matrix with all its elements set to 0.

pub fn from_iterator_generic<I>(nrows: R, ncols: C, iter: I) -> Self where
    I: IntoIterator<Item = T>, 

Creates a matrix with all its elements filled by an iterator.

pub fn from_row_slice_generic(nrows: R, ncols: C, slice: &[T]) -> Self

Creates a matrix with its elements filled with the components provided by a slice in row-major order.

The order of elements in the slice must follow the usual mathematic writing, i.e., row-by-row.

pub fn from_column_slice_generic(nrows: R, ncols: C, slice: &[T]) -> Self

Creates a matrix with its elements filled with the components provided by a slice. The components must have the same layout as the matrix data storage (i.e. column-major).

pub fn from_fn_generic<F>(nrows: R, ncols: C, f: F) -> Self where
    F: FnMut(usize, usize) -> T, 

Creates a matrix filled with the results of a function applied to each of its component coordinates.

pub fn identity_generic(nrows: R, ncols: C) -> Self where
    T: Zero + One, 

Creates a new identity matrix.

If the matrix is not square, the largest square submatrix starting at index (0, 0) is set to the identity matrix. All other entries are set to zero.

pub fn from_diagonal_element_generic(nrows: R, ncols: C, elt: T) -> Self where
    T: Zero + One, 

Creates a new matrix with its diagonal filled with copies of elt.

If the matrix is not square, the largest square submatrix starting at index (0, 0) is set to the identity matrix. All other entries are set to zero.

pub fn from_partial_diagonal_generic(nrows: R, ncols: C, elts: &[T]) -> Self where
    T: Zero, 

Creates a new matrix that may be rectangular. The first elts.len() diagonal elements are filled with the content of elts. Others are set to 0.

Panics if elts.len() is larger than the minimum among nrows and ncols.

pub fn from_rows<SB>(rows: &[Matrix<T, Const<1>, C, SB>]) -> Self where
    SB: Storage<T, Const<1>, C>, 

Builds a new matrix from its rows.

Panics if not enough rows are provided (for statically-sized matrices), or if all rows do not have the same dimensions.

Example

let m = Matrix3::from_rows(&[ RowVector3::new(1.0, 2.0, 3.0),  RowVector3::new(4.0, 5.0, 6.0),  RowVector3::new(7.0, 8.0, 9.0) ]);

assert!(m.m11 == 1.0 && m.m12 == 2.0 && m.m13 == 3.0 &&
        m.m21 == 4.0 && m.m22 == 5.0 && m.m23 == 6.0 &&
        m.m31 == 7.0 && m.m32 == 8.0 && m.m33 == 9.0);

pub fn from_columns<SB>(columns: &[Vector<T, R, SB>]) -> Self where
    SB: Storage<T, R>, 

Builds a new matrix from its columns.

Panics if not enough columns are provided (for statically-sized matrices), or if all columns do not have the same dimensions.

Example

let m = Matrix3::from_columns(&[ Vector3::new(1.0, 2.0, 3.0),  Vector3::new(4.0, 5.0, 6.0),  Vector3::new(7.0, 8.0, 9.0) ]);

assert!(m.m11 == 1.0 && m.m12 == 4.0 && m.m13 == 7.0 &&
        m.m21 == 2.0 && m.m22 == 5.0 && m.m23 == 8.0 &&
        m.m31 == 3.0 && m.m32 == 6.0 && m.m33 == 9.0);

pub fn from_vec_generic(nrows: R, ncols: C, data: Vec<T>) -> Self

Creates a matrix backed by a given Vec.

The output matrix is filled column-by-column.

Example

let vec = vec![0, 1, 2, 3, 4, 5];
let vec_ptr = vec.as_ptr();

let matrix = Matrix::from_vec_generic(Dynamic::new(vec.len()), Const::<1>, vec);
let matrix_storage_ptr = matrix.data.as_vec().as_ptr();

// `matrix` is backed by exactly the same `Vec` as it was constructed from.
assert_eq!(matrix_storage_ptr, vec_ptr);

impl<T, D: Dim> OMatrix<T, D, D> where
    T: Scalar,
    DefaultAllocator: Allocator<T, D, D>, 

pub fn from_diagonal<SB: Storage<T, D>>(diag: &Vector<T, D, SB>) -> Self where
    T: Zero, 

Creates a square matrix with its diagonal set to diag and all other entries set to 0.

Example

let m = Matrix3::from_diagonal(&Vector3::new(1.0, 2.0, 3.0));
// The two additional arguments represent the matrix dimensions.
let dm = DMatrix::from_diagonal(&DVector::from_row_slice(&[1.0, 2.0, 3.0]));

assert!(m.m11 == 1.0 && m.m12 == 0.0 && m.m13 == 0.0 &&
        m.m21 == 0.0 && m.m22 == 2.0 && m.m23 == 0.0 &&
        m.m31 == 0.0 && m.m32 == 0.0 && m.m33 == 3.0);
assert!(dm[(0, 0)] == 1.0 && dm[(0, 1)] == 0.0 && dm[(0, 2)] == 0.0 &&
        dm[(1, 0)] == 0.0 && dm[(1, 1)] == 2.0 && dm[(1, 2)] == 0.0 &&
        dm[(2, 0)] == 0.0 && dm[(2, 1)] == 0.0 && dm[(2, 2)] == 3.0);

impl<T: Scalar, R: DimName, C: DimName> OMatrix<T, R, C> where
    DefaultAllocator: Allocator<T, R, C>, 

Constructors of statically-sized vectors or statically-sized matrices

pub unsafe fn new_uninitialized() -> MaybeUninit<Self>

Creates a new uninitialized matrix or vector.

pub fn from_element(elem: T) -> Self

Creates a matrix or vector with all its elements set to elem.

Example

let v = Vector3::from_element(2.0);
// The additional argument represents the vector dimension.
let dv = DVector::from_element(3, 2.0);
let m = Matrix2x3::from_element(2.0);
// The two additional arguments represent the matrix dimensions.
let dm = DMatrix::from_element(2, 3, 2.0);

assert!(v.x == 2.0 && v.y == 2.0 && v.z == 2.0);
assert!(dv[0] == 2.0 && dv[1] == 2.0 && dv[2] == 2.0);
assert!(m.m11 == 2.0 && m.m12 == 2.0 && m.m13 == 2.0 &&
        m.m21 == 2.0 && m.m22 == 2.0 && m.m23 == 2.0);
assert!(dm[(0, 0)] == 2.0 && dm[(0, 1)] == 2.0 && dm[(0, 2)] == 2.0 &&
        dm[(1, 0)] == 2.0 && dm[(1, 1)] == 2.0 && dm[(1, 2)] == 2.0);

pub fn repeat(elem: T) -> Self

Creates a matrix or vector with all its elements set to elem.

Same as .from_element.

Example

let v = Vector3::repeat(2.0);
// The additional argument represents the vector dimension.
let dv = DVector::repeat(3, 2.0);
let m = Matrix2x3::repeat(2.0);
// The two additional arguments represent the matrix dimensions.
let dm = DMatrix::repeat(2, 3, 2.0);

assert!(v.x == 2.0 && v.y == 2.0 && v.z == 2.0);
assert!(dv[0] == 2.0 && dv[1] == 2.0 && dv[2] == 2.0);
assert!(m.m11 == 2.0 && m.m12 == 2.0 && m.m13 == 2.0 &&
        m.m21 == 2.0 && m.m22 == 2.0 && m.m23 == 2.0);
assert!(dm[(0, 0)] == 2.0 && dm[(0, 1)] == 2.0 && dm[(0, 2)] == 2.0 &&
        dm[(1, 0)] == 2.0 && dm[(1, 1)] == 2.0 && dm[(1, 2)] == 2.0);

pub fn zeros() -> Self where
    T: Zero, 

Creates a matrix or vector with all its elements set to 0.

Example

let v = Vector3::<f32>::zeros();
// The argument represents the vector dimension.
let dv = DVector::<f32>::zeros(3);
let m = Matrix2x3::<f32>::zeros();
// The two arguments represent the matrix dimensions.
let dm = DMatrix::<f32>::zeros(2, 3);

assert!(v.x == 0.0 && v.y == 0.0 && v.z == 0.0);
assert!(dv[0] == 0.0 && dv[1] == 0.0 && dv[2] == 0.0);
assert!(m.m11 == 0.0 && m.m12 == 0.0 && m.m13 == 0.0 &&
        m.m21 == 0.0 && m.m22 == 0.0 && m.m23 == 0.0);
assert!(dm[(0, 0)] == 0.0 && dm[(0, 1)] == 0.0 && dm[(0, 2)] == 0.0 &&
        dm[(1, 0)] == 0.0 && dm[(1, 1)] == 0.0 && dm[(1, 2)] == 0.0);

pub fn from_iterator<I>(iter: I) -> Self where
    I: IntoIterator<Item = T>, 

Creates a matrix or vector with all its elements filled by an iterator.

The output matrix is filled column-by-column.

Example

let v = Vector3::from_iterator((0..3).into_iter());
// The additional argument represents the vector dimension.
let dv = DVector::from_iterator(3, (0..3).into_iter());
let m = Matrix2x3::from_iterator((0..6).into_iter());
// The two additional arguments represent the matrix dimensions.
let dm = DMatrix::from_iterator(2, 3, (0..6).into_iter());

assert!(v.x == 0 && v.y == 1 && v.z == 2);
assert!(dv[0] == 0 && dv[1] == 1 && dv[2] == 2);
assert!(m.m11 == 0 && m.m12 == 2 && m.m13 == 4 &&
        m.m21 == 1 && m.m22 == 3 && m.m23 == 5);
assert!(dm[(0, 0)] == 0 && dm[(0, 1)] == 2 && dm[(0, 2)] == 4 &&
        dm[(1, 0)] == 1 && dm[(1, 1)] == 3 && dm[(1, 2)] == 5);

pub fn from_fn<F>(f: F) -> Self where
    F: FnMut(usize, usize) -> T, 

Creates a matrix or vector filled with the results of a function applied to each of its component coordinates.

Example

let v = Vector3::from_fn(|i, _| i);
// The additional argument represents the vector dimension.
let dv = DVector::from_fn(3, |i, _| i);
let m = Matrix2x3::from_fn(|i, j| i * 3 + j);
// The two additional arguments represent the matrix dimensions.
let dm = DMatrix::from_fn(2, 3, |i, j| i * 3 + j);

assert!(v.x == 0 && v.y == 1 && v.z == 2);
assert!(dv[0] == 0 && dv[1] == 1 && dv[2] == 2);
assert!(m.m11 == 0 && m.m12 == 1 && m.m13 == 2 &&
        m.m21 == 3 && m.m22 == 4 && m.m23 == 5);
assert!(dm[(0, 0)] == 0 && dm[(0, 1)] == 1 && dm[(0, 2)] == 2 &&
        dm[(1, 0)] == 3 && dm[(1, 1)] == 4 && dm[(1, 2)] == 5);

pub fn identity() -> Self where
    T: Zero + One, 

Creates an identity matrix. If the matrix is not square, the largest square submatrix (starting at the first row and column) is set to the identity while all other entries are set to zero.

Example

let m = Matrix2x3::<f32>::identity();
// The two additional arguments represent the matrix dimensions.
let dm = DMatrix::<f32>::identity(2, 3);

assert!(m.m11 == 1.0 && m.m12 == 0.0 && m.m13 == 0.0 &&
        m.m21 == 0.0 && m.m22 == 1.0 && m.m23 == 0.0);
assert!(dm[(0, 0)] == 1.0 && dm[(0, 1)] == 0.0 && dm[(0, 2)] == 0.0 &&
        dm[(1, 0)] == 0.0 && dm[(1, 1)] == 1.0 && dm[(1, 2)] == 0.0);

pub fn from_diagonal_element(elt: T) -> Self where
    T: Zero + One, 

Creates a matrix filled with its diagonal filled with elt and all other components set to zero.

Example

let m = Matrix2x3::from_diagonal_element(5.0);
// The two additional arguments represent the matrix dimensions.
let dm = DMatrix::from_diagonal_element(2, 3, 5.0);

assert!(m.m11 == 5.0 && m.m12 == 0.0 && m.m13 == 0.0 &&
        m.m21 == 0.0 && m.m22 == 5.0 && m.m23 == 0.0);
assert!(dm[(0, 0)] == 5.0 && dm[(0, 1)] == 0.0 && dm[(0, 2)] == 0.0 &&
        dm[(1, 0)] == 0.0 && dm[(1, 1)] == 5.0 && dm[(1, 2)] == 0.0);

pub fn from_partial_diagonal(elts: &[T]) -> Self where
    T: Zero, 

Creates a new matrix that may be rectangular. The first elts.len() diagonal elements are filled with the content of elts. Others are set to 0.

Panics if elts.len() is larger than the minimum among nrows and ncols.

Example

let m = Matrix3::from_partial_diagonal(&[1.0, 2.0]);
// The two additional arguments represent the matrix dimensions.
let dm = DMatrix::from_partial_diagonal(3, 3, &[1.0, 2.0]);

assert!(m.m11 == 1.0 && m.m12 == 0.0 && m.m13 == 0.0 &&
        m.m21 == 0.0 && m.m22 == 2.0 && m.m23 == 0.0 &&
        m.m31 == 0.0 && m.m32 == 0.0 && m.m33 == 0.0);
assert!(dm[(0, 0)] == 1.0 && dm[(0, 1)] == 0.0 && dm[(0, 2)] == 0.0 &&
        dm[(1, 0)] == 0.0 && dm[(1, 1)] == 2.0 && dm[(1, 2)] == 0.0 &&
        dm[(2, 0)] == 0.0 && dm[(2, 1)] == 0.0 && dm[(2, 2)] == 0.0);

impl<T: Scalar, R: DimName> OMatrix<T, R, Dynamic> where
    DefaultAllocator: Allocator<T, R, Dynamic>, 

Constructors of matrices with a dynamic number of columns

pub unsafe fn new_uninitialized(ncols: usize) -> MaybeUninit<Self>

Creates a new uninitialized matrix or vector.

pub fn from_element(ncols: usize, elem: T) -> Self

Creates a matrix or vector with all its elements set to elem.

Example

let v = Vector3::from_element(2.0);
// The additional argument represents the vector dimension.
let dv = DVector::from_element(3, 2.0);
let m = Matrix2x3::from_element(2.0);
// The two additional arguments represent the matrix dimensions.
let dm = DMatrix::from_element(2, 3, 2.0);

assert!(v.x == 2.0 && v.y == 2.0 && v.z == 2.0);
assert!(dv[0] == 2.0 && dv[1] == 2.0 && dv[2] == 2.0);
assert!(m.m11 == 2.0 && m.m12 == 2.0 && m.m13 == 2.0 &&
        m.m21 == 2.0 && m.m22 == 2.0 && m.m23 == 2.0);
assert!(dm[(0, 0)] == 2.0 && dm[(0, 1)] == 2.0 && dm[(0, 2)] == 2.0 &&
        dm[(1, 0)] == 2.0 && dm[(1, 1)] == 2.0 && dm[(1, 2)] == 2.0);

pub fn repeat(ncols: usize, elem: T) -> Self

Creates a matrix or vector with all its elements set to elem.

Same as .from_element.

Example

let v = Vector3::repeat(2.0);
// The additional argument represents the vector dimension.
let dv = DVector::repeat(3, 2.0);
let m = Matrix2x3::repeat(2.0);
// The two additional arguments represent the matrix dimensions.
let dm = DMatrix::repeat(2, 3, 2.0);

assert!(v.x == 2.0 && v.y == 2.0 && v.z == 2.0);
assert!(dv[0] == 2.0 && dv[1] == 2.0 && dv[2] == 2.0);
assert!(m.m11 == 2.0 && m.m12 == 2.0 && m.m13 == 2.0 &&
        m.m21 == 2.0 && m.m22 == 2.0 && m.m23 == 2.0);
assert!(dm[(0, 0)] == 2.0 && dm[(0, 1)] == 2.0 && dm[(0, 2)] == 2.0 &&
        dm[(1, 0)] == 2.0 && dm[(1, 1)] == 2.0 && dm[(1, 2)] == 2.0);

pub fn zeros(ncols: usize) -> Self where
    T: Zero, 

Creates a matrix or vector with all its elements set to 0.

Example

let v = Vector3::<f32>::zeros();
// The argument represents the vector dimension.
let dv = DVector::<f32>::zeros(3);
let m = Matrix2x3::<f32>::zeros();
// The two arguments represent the matrix dimensions.
let dm = DMatrix::<f32>::zeros(2, 3);

assert!(v.x == 0.0 && v.y == 0.0 && v.z == 0.0);
assert!(dv[0] == 0.0 && dv[1] == 0.0 && dv[2] == 0.0);
assert!(m.m11 == 0.0 && m.m12 == 0.0 && m.m13 == 0.0 &&
        m.m21 == 0.0 && m.m22 == 0.0 && m.m23 == 0.0);
assert!(dm[(0, 0)] == 0.0 && dm[(0, 1)] == 0.0 && dm[(0, 2)] == 0.0 &&
        dm[(1, 0)] == 0.0 && dm[(1, 1)] == 0.0 && dm[(1, 2)] == 0.0);

pub fn from_iterator<I>(ncols: usize, iter: I) -> Self where
    I: IntoIterator<Item = T>, 

Creates a matrix or vector with all its elements filled by an iterator.

The output matrix is filled column-by-column.

Example

let v = Vector3::from_iterator((0..3).into_iter());
// The additional argument represents the vector dimension.
let dv = DVector::from_iterator(3, (0..3).into_iter());
let m = Matrix2x3::from_iterator((0..6).into_iter());
// The two additional arguments represent the matrix dimensions.
let dm = DMatrix::from_iterator(2, 3, (0..6).into_iter());

assert!(v.x == 0 && v.y == 1 && v.z == 2);
assert!(dv[0] == 0 && dv[1] == 1 && dv[2] == 2);
assert!(m.m11 == 0 && m.m12 == 2 && m.m13 == 4 &&
        m.m21 == 1 && m.m22 == 3 && m.m23 == 5);
assert!(dm[(0, 0)] == 0 && dm[(0, 1)] == 2 && dm[(0, 2)] == 4 &&
        dm[(1, 0)] == 1 && dm[(1, 1)] == 3 && dm[(1, 2)] == 5);

pub fn from_fn<F>(ncols: usize, f: F) -> Self where
    F: FnMut(usize, usize) -> T, 

Creates a matrix or vector filled with the results of a function applied to each of its component coordinates.

Example

let v = Vector3::from_fn(|i, _| i);
// The additional argument represents the vector dimension.
let dv = DVector::from_fn(3, |i, _| i);
let m = Matrix2x3::from_fn(|i, j| i * 3 + j);
// The two additional arguments represent the matrix dimensions.
let dm = DMatrix::from_fn(2, 3, |i, j| i * 3 + j);

assert!(v.x == 0 && v.y == 1 && v.z == 2);
assert!(dv[0] == 0 && dv[1] == 1 && dv[2] == 2);
assert!(m.m11 == 0 && m.m12 == 1 && m.m13 == 2 &&
        m.m21 == 3 && m.m22 == 4 && m.m23 == 5);
assert!(dm[(0, 0)] == 0 && dm[(0, 1)] == 1 && dm[(0, 2)] == 2 &&
        dm[(1, 0)] == 3 && dm[(1, 1)] == 4 && dm[(1, 2)] == 5);

pub fn identity(ncols: usize) -> Self where
    T: Zero + One, 

Creates an identity matrix. If the matrix is not square, the largest square submatrix (starting at the first row and column) is set to the identity while all other entries are set to zero.

Example

let m = Matrix2x3::<f32>::identity();
// The two additional arguments represent the matrix dimensions.
let dm = DMatrix::<f32>::identity(2, 3);

assert!(m.m11 == 1.0 && m.m12 == 0.0 && m.m13 == 0.0 &&
        m.m21 == 0.0 && m.m22 == 1.0 && m.m23 == 0.0);
assert!(dm[(0, 0)] == 1.0 && dm[(0, 1)] == 0.0 && dm[(0, 2)] == 0.0 &&
        dm[(1, 0)] == 0.0 && dm[(1, 1)] == 1.0 && dm[(1, 2)] == 0.0);

pub fn from_diagonal_element(ncols: usize, elt: T) -> Self where
    T: Zero + One, 

Creates a matrix filled with its diagonal filled with elt and all other components set to zero.

Example

let m = Matrix2x3::from_diagonal_element(5.0);
// The two additional arguments represent the matrix dimensions.
let dm = DMatrix::from_diagonal_element(2, 3, 5.0);

assert!(m.m11 == 5.0 && m.m12 == 0.0 && m.m13 == 0.0 &&
        m.m21 == 0.0 && m.m22 == 5.0 && m.m23 == 0.0);
assert!(dm[(0, 0)] == 5.0 && dm[(0, 1)] == 0.0 && dm[(0, 2)] == 0.0 &&
        dm[(1, 0)] == 0.0 && dm[(1, 1)] == 5.0 && dm[(1, 2)] == 0.0);

pub fn from_partial_diagonal(ncols: usize, elts: &[T]) -> Self where
    T: Zero, 

Creates a new matrix that may be rectangular. The first elts.len() diagonal elements are filled with the content of elts. Others are set to 0.

Panics if elts.len() is larger than the minimum among nrows and ncols.

Example

let m = Matrix3::from_partial_diagonal(&[1.0, 2.0]);
// The two additional arguments represent the matrix dimensions.
let dm = DMatrix::from_partial_diagonal(3, 3, &[1.0, 2.0]);

assert!(m.m11 == 1.0 && m.m12 == 0.0 && m.m13 == 0.0 &&
        m.m21 == 0.0 && m.m22 == 2.0 && m.m23 == 0.0 &&
        m.m31 == 0.0 && m.m32 == 0.0 && m.m33 == 0.0);
assert!(dm[(0, 0)] == 1.0 && dm[(0, 1)] == 0.0 && dm[(0, 2)] == 0.0 &&
        dm[(1, 0)] == 0.0 && dm[(1, 1)] == 2.0 && dm[(1, 2)] == 0.0 &&
        dm[(2, 0)] == 0.0 && dm[(2, 1)] == 0.0 && dm[(2, 2)] == 0.0);

impl<T: Scalar, C: DimName> OMatrix<T, Dynamic, C> where
    DefaultAllocator: Allocator<T, Dynamic, C>, 

Constructors of dynamic vectors and matrices with a dynamic number of rows

pub unsafe fn new_uninitialized(nrows: usize) -> MaybeUninit<Self>

Creates a new uninitialized matrix or vector.

pub fn from_element(nrows: usize, elem: T) -> Self

Creates a matrix or vector with all its elements set to elem.

Example

let v = Vector3::from_element(2.0);
// The additional argument represents the vector dimension.
let dv = DVector::from_element(3, 2.0);
let m = Matrix2x3::from_element(2.0);
// The two additional arguments represent the matrix dimensions.
let dm = DMatrix::from_element(2, 3, 2.0);

assert!(v.x == 2.0 && v.y == 2.0 && v.z == 2.0);
assert!(dv[0] == 2.0 && dv[1] == 2.0 && dv[2] == 2.0);
assert!(m.m11 == 2.0 && m.m12 == 2.0 && m.m13 == 2.0 &&
        m.m21 == 2.0 && m.m22 == 2.0 && m.m23 == 2.0);
assert!(dm[(0, 0)] == 2.0 && dm[(0, 1)] == 2.0 && dm[(0, 2)] == 2.0 &&
        dm[(1, 0)] == 2.0 && dm[(1, 1)] == 2.0 && dm[(1, 2)] == 2.0);

pub fn repeat(nrows: usize, elem: T) -> Self

Creates a matrix or vector with all its elements set to elem.

Same as .from_element.

Example

let v = Vector3::repeat(2.0);
// The additional argument represents the vector dimension.
let dv = DVector::repeat(3, 2.0);
let m = Matrix2x3::repeat(2.0);
// The two additional arguments represent the matrix dimensions.
let dm = DMatrix::repeat(2, 3, 2.0);

assert!(v.x == 2.0 && v.y == 2.0 && v.z == 2.0);
assert!(dv[0] == 2.0 && dv[1] == 2.0 && dv[2] == 2.0);
assert!(m.m11 == 2.0 && m.m12 == 2.0 && m.m13 == 2.0 &&
        m.m21 == 2.0 && m.m22 == 2.0 && m.m23 == 2.0);
assert!(dm[(0, 0)] == 2.0 && dm[(0, 1)] == 2.0 && dm[(0, 2)] == 2.0 &&
        dm[(1, 0)] == 2.0 && dm[(1, 1)] == 2.0 && dm[(1, 2)] == 2.0);

pub fn zeros(nrows: usize) -> Self where
    T: Zero, 

Creates a matrix or vector with all its elements set to 0.

Example

let v = Vector3::<f32>::zeros();
// The argument represents the vector dimension.
let dv = DVector::<f32>::zeros(3);
let m = Matrix2x3::<f32>::zeros();
// The two arguments represent the matrix dimensions.
let dm = DMatrix::<f32>::zeros(2, 3);

assert!(v.x == 0.0 && v.y == 0.0 && v.z == 0.0);
assert!(dv[0] == 0.0 && dv[1] == 0.0 && dv[2] == 0.0);
assert!(m.m11 == 0.0 && m.m12 == 0.0 && m.m13 == 0.0 &&
        m.m21 == 0.0 && m.m22 == 0.0 && m.m23 == 0.0);
assert!(dm[(0, 0)] == 0.0 && dm[(0, 1)] == 0.0 && dm[(0, 2)] == 0.0 &&
        dm[(1, 0)] == 0.0 && dm[(1, 1)] == 0.0 && dm[(1, 2)] == 0.0);

pub fn from_iterator<I>(nrows: usize, iter: I) -> Self where
    I: IntoIterator<Item = T>, 

Creates a matrix or vector with all its elements filled by an iterator.

The output matrix is filled column-by-column.

Example

let v = Vector3::from_iterator((0..3).into_iter());
// The additional argument represents the vector dimension.
let dv = DVector::from_iterator(3, (0..3).into_iter());
let m = Matrix2x3::from_iterator((0..6).into_iter());
// The two additional arguments represent the matrix dimensions.
let dm = DMatrix::from_iterator(2, 3, (0..6).into_iter());

assert!(v.x == 0 && v.y == 1 && v.z == 2);
assert!(dv[0] == 0 && dv[1] == 1 && dv[2] == 2);
assert!(m.m11 == 0 && m.m12 == 2 && m.m13 == 4 &&
        m.m21 == 1 && m.m22 == 3 && m.m23 == 5);
assert!(dm[(0, 0)] == 0 && dm[(0, 1)] == 2 && dm[(0, 2)] == 4 &&
        dm[(1, 0)] == 1 && dm[(1, 1)] == 3 && dm[(1, 2)] == 5);

pub fn from_fn<F>(nrows: usize, f: F) -> Self where
    F: FnMut(usize, usize) -> T, 

Creates a matrix or vector filled with the results of a function applied to each of its component coordinates.

Example

let v = Vector3::from_fn(|i, _| i);
// The additional argument represents the vector dimension.
let dv = DVector::from_fn(3, |i, _| i);
let m = Matrix2x3::from_fn(|i, j| i * 3 + j);
// The two additional arguments represent the matrix dimensions.
let dm = DMatrix::from_fn(2, 3, |i, j| i * 3 + j);

assert!(v.x == 0 && v.y == 1 && v.z == 2);
assert!(dv[0] == 0 && dv[1] == 1 && dv[2] == 2);
assert!(m.m11 == 0 && m.m12 == 1 && m.m13 == 2 &&
        m.m21 == 3 && m.m22 == 4 && m.m23 == 5);
assert!(dm[(0, 0)] == 0 && dm[(0, 1)] == 1 && dm[(0, 2)] == 2 &&
        dm[(1, 0)] == 3 && dm[(1, 1)] == 4 && dm[(1, 2)] == 5);

pub fn identity(nrows: usize) -> Self where
    T: Zero + One, 

Creates an identity matrix. If the matrix is not square, the largest square submatrix (starting at the first row and column) is set to the identity while all other entries are set to zero.

Example

let m = Matrix2x3::<f32>::identity();
// The two additional arguments represent the matrix dimensions.
let dm = DMatrix::<f32>::identity(2, 3);

assert!(m.m11 == 1.0 && m.m12 == 0.0 && m.m13 == 0.0 &&
        m.m21 == 0.0 && m.m22 == 1.0 && m.m23 == 0.0);
assert!(dm[(0, 0)] == 1.0 && dm[(0, 1)] == 0.0 && dm[(0, 2)] == 0.0 &&
        dm[(1, 0)] == 0.0 && dm[(1, 1)] == 1.0 && dm[(1, 2)] == 0.0);

pub fn from_diagonal_element(nrows: usize, elt: T) -> Self where
    T: Zero + One, 

Creates a matrix filled with its diagonal filled with elt and all other components set to zero.

Example

let m = Matrix2x3::from_diagonal_element(5.0);
// The two additional arguments represent the matrix dimensions.
let dm = DMatrix::from_diagonal_element(2, 3, 5.0);

assert!(m.m11 == 5.0 && m.m12 == 0.0 && m.m13 == 0.0 &&
        m.m21 == 0.0 && m.m22 == 5.0 && m.m23 == 0.0);
assert!(dm[(0, 0)] == 5.0 && dm[(0, 1)] == 0.0 && dm[(0, 2)] == 0.0 &&
        dm[(1, 0)] == 0.0 && dm[(1, 1)] == 5.0 && dm[(1, 2)] == 0.0);

pub fn from_partial_diagonal(nrows: usize, elts: &[T]) -> Self where
    T: Zero, 

Creates a new matrix that may be rectangular. The first elts.len() diagonal elements are filled with the content of elts. Others are set to 0.

Panics if elts.len() is larger than the minimum among nrows and ncols.

Example

let m = Matrix3::from_partial_diagonal(&[1.0, 2.0]);
// The two additional arguments represent the matrix dimensions.
let dm = DMatrix::from_partial_diagonal(3, 3, &[1.0, 2.0]);

assert!(m.m11 == 1.0 && m.m12 == 0.0 && m.m13 == 0.0 &&
        m.m21 == 0.0 && m.m22 == 2.0 && m.m23 == 0.0 &&
        m.m31 == 0.0 && m.m32 == 0.0 && m.m33 == 0.0);
assert!(dm[(0, 0)] == 1.0 && dm[(0, 1)] == 0.0 && dm[(0, 2)] == 0.0 &&
        dm[(1, 0)] == 0.0 && dm[(1, 1)] == 2.0 && dm[(1, 2)] == 0.0 &&
        dm[(2, 0)] == 0.0 && dm[(2, 1)] == 0.0 && dm[(2, 2)] == 0.0);

impl<T: Scalar> OMatrix<T, Dynamic, Dynamic> where
    DefaultAllocator: Allocator<T, Dynamic, Dynamic>, 

Constructors of fully dynamic matrices

pub unsafe fn new_uninitialized(nrows: usize, ncols: usize) -> MaybeUninit<Self>

Creates a new uninitialized matrix or vector.

pub fn from_element(nrows: usize, ncols: usize, elem: T) -> Self

Creates a matrix or vector with all its elements set to elem.

Example

let v = Vector3::from_element(2.0);
// The additional argument represents the vector dimension.
let dv = DVector::from_element(3, 2.0);
let m = Matrix2x3::from_element(2.0);
// The two additional arguments represent the matrix dimensions.
let dm = DMatrix::from_element(2, 3, 2.0);

assert!(v.x == 2.0 && v.y == 2.0 && v.z == 2.0);
assert!(dv[0] == 2.0 && dv[1] == 2.0 && dv[2] == 2.0);
assert!(m.m11 == 2.0 && m.m12 == 2.0 && m.m13 == 2.0 &&
        m.m21 == 2.0 && m.m22 == 2.0 && m.m23 == 2.0);
assert!(dm[(0, 0)] == 2.0 && dm[(0, 1)] == 2.0 && dm[(0, 2)] == 2.0 &&
        dm[(1, 0)] == 2.0 && dm[(1, 1)] == 2.0 && dm[(1, 2)] == 2.0);

pub fn repeat(nrows: usize, ncols: usize, elem: T) -> Self

Creates a matrix or vector with all its elements set to elem.

Same as .from_element.

Example

let v = Vector3::repeat(2.0);
// The additional argument represents the vector dimension.
let dv = DVector::repeat(3, 2.0);
let m = Matrix2x3::repeat(2.0);
// The two additional arguments represent the matrix dimensions.
let dm = DMatrix::repeat(2, 3, 2.0);

assert!(v.x == 2.0 && v.y == 2.0 && v.z == 2.0);
assert!(dv[0] == 2.0 && dv[1] == 2.0 && dv[2] == 2.0);
assert!(m.m11 == 2.0 && m.m12 == 2.0 && m.m13 == 2.0 &&
        m.m21 == 2.0 && m.m22 == 2.0 && m.m23 == 2.0);
assert!(dm[(0, 0)] == 2.0 && dm[(0, 1)] == 2.0 && dm[(0, 2)] == 2.0 &&
        dm[(1, 0)] == 2.0 && dm[(1, 1)] == 2.0 && dm[(1, 2)] == 2.0);

pub fn zeros(nrows: usize, ncols: usize) -> Self where
    T: Zero, 

Creates a matrix or vector with all its elements set to 0.

Example

let v = Vector3::<f32>::zeros();
// The argument represents the vector dimension.
let dv = DVector::<f32>::zeros(3);
let m = Matrix2x3::<f32>::zeros();
// The two arguments represent the matrix dimensions.
let dm = DMatrix::<f32>::zeros(2, 3);

assert!(v.x == 0.0 && v.y == 0.0 && v.z == 0.0);
assert!(dv[0] == 0.0 && dv[1] == 0.0 && dv[2] == 0.0);
assert!(m.m11 == 0.0 && m.m12 == 0.0 && m.m13 == 0.0 &&
        m.m21 == 0.0 && m.m22 == 0.0 && m.m23 == 0.0);
assert!(dm[(0, 0)] == 0.0 && dm[(0, 1)] == 0.0 && dm[(0, 2)] == 0.0 &&
        dm[(1, 0)] == 0.0 && dm[(1, 1)] == 0.0 && dm[(1, 2)] == 0.0);

pub fn from_iterator<I>(nrows: usize, ncols: usize, iter: I) -> Self where
    I: IntoIterator<Item = T>, 

Creates a matrix or vector with all its elements filled by an iterator.

The output matrix is filled column-by-column.

Example

let v = Vector3::from_iterator((0..3).into_iter());
// The additional argument represents the vector dimension.
let dv = DVector::from_iterator(3, (0..3).into_iter());
let m = Matrix2x3::from_iterator((0..6).into_iter());
// The two additional arguments represent the matrix dimensions.
let dm = DMatrix::from_iterator(2, 3, (0..6).into_iter());

assert!(v.x == 0 && v.y == 1 && v.z == 2);
assert!(dv[0] == 0 && dv[1] == 1 && dv[2] == 2);
assert!(m.m11 == 0 && m.m12 == 2 && m.m13 == 4 &&
        m.m21 == 1 && m.m22 == 3 && m.m23 == 5);
assert!(dm[(0, 0)] == 0 && dm[(0, 1)] == 2 && dm[(0, 2)] == 4 &&
        dm[(1, 0)] == 1 && dm[(1, 1)] == 3 && dm[(1, 2)] == 5);

pub fn from_fn<F>(nrows: usize, ncols: usize, f: F) -> Self where
    F: FnMut(usize, usize) -> T, 

Creates a matrix or vector filled with the results of a function applied to each of its component coordinates.

Example

let v = Vector3::from_fn(|i, _| i);
// The additional argument represents the vector dimension.
let dv = DVector::from_fn(3, |i, _| i);
let m = Matrix2x3::from_fn(|i, j| i * 3 + j);
// The two additional arguments represent the matrix dimensions.
let dm = DMatrix::from_fn(2, 3, |i, j| i * 3 + j);

assert!(v.x == 0 && v.y == 1 && v.z == 2);
assert!(dv[0] == 0 && dv[1] == 1 && dv[2] == 2);
assert!(m.m11 == 0 && m.m12 == 1 && m.m13 == 2 &&
        m.m21 == 3 && m.m22 == 4 && m.m23 == 5);
assert!(dm[(0, 0)] == 0 && dm[(0, 1)] == 1 && dm[(0, 2)] == 2 &&
        dm[(1, 0)] == 3 && dm[(1, 1)] == 4 && dm[(1, 2)] == 5);

pub fn identity(nrows: usize, ncols: usize) -> Self where
    T: Zero + One, 

Creates an identity matrix. If the matrix is not square, the largest square submatrix (starting at the first row and column) is set to the identity while all other entries are set to zero.

Example

let m = Matrix2x3::<f32>::identity();
// The two additional arguments represent the matrix dimensions.
let dm = DMatrix::<f32>::identity(2, 3);

assert!(m.m11 == 1.0 && m.m12 == 0.0 && m.m13 == 0.0 &&
        m.m21 == 0.0 && m.m22 == 1.0 && m.m23 == 0.0);
assert!(dm[(0, 0)] == 1.0 && dm[(0, 1)] == 0.0 && dm[(0, 2)] == 0.0 &&
        dm[(1, 0)] == 0.0 && dm[(1, 1)] == 1.0 && dm[(1, 2)] == 0.0);

pub fn from_diagonal_element(nrows: usize, ncols: usize, elt: T) -> Self where
    T: Zero + One, 

Creates a matrix filled with its diagonal filled with elt and all other components set to zero.

Example

let m = Matrix2x3::from_diagonal_element(5.0);
// The two additional arguments represent the matrix dimensions.
let dm = DMatrix::from_diagonal_element(2, 3, 5.0);

assert!(m.m11 == 5.0 && m.m12 == 0.0 && m.m13 == 0.0 &&
        m.m21 == 0.0 && m.m22 == 5.0 && m.m23 == 0.0);
assert!(dm[(0, 0)] == 5.0 && dm[(0, 1)] == 0.0 && dm[(0, 2)] == 0.0 &&
        dm[(1, 0)] == 0.0 && dm[(1, 1)] == 5.0 && dm[(1, 2)] == 0.0);

pub fn from_partial_diagonal(nrows: usize, ncols: usize, elts: &[T]) -> Self where
    T: Zero, 

Creates a new matrix that may be rectangular. The first elts.len() diagonal elements are filled with the content of elts. Others are set to 0.

Panics if elts.len() is larger than the minimum among nrows and ncols.

Example

let m = Matrix3::from_partial_diagonal(&[1.0, 2.0]);
// The two additional arguments represent the matrix dimensions.
let dm = DMatrix::from_partial_diagonal(3, 3, &[1.0, 2.0]);

assert!(m.m11 == 1.0 && m.m12 == 0.0 && m.m13 == 0.0 &&
        m.m21 == 0.0 && m.m22 == 2.0 && m.m23 == 0.0 &&
        m.m31 == 0.0 && m.m32 == 0.0 && m.m33 == 0.0);
assert!(dm[(0, 0)] == 1.0 && dm[(0, 1)] == 0.0 && dm[(0, 2)] == 0.0 &&
        dm[(1, 0)] == 0.0 && dm[(1, 1)] == 2.0 && dm[(1, 2)] == 0.0 &&
        dm[(2, 0)] == 0.0 && dm[(2, 1)] == 0.0 && dm[(2, 2)] == 0.0);

impl<T: Scalar, R: DimName, C: DimName> OMatrix<T, R, C> where
    DefaultAllocator: Allocator<T, R, C>, 

pub fn from_row_slice(data: &[T]) -> Self

Creates a matrix with its elements filled with the components provided by a slice in row-major order.

The order of elements in the slice must follow the usual mathematic writing, i.e., row-by-row.

Example

let v = Vector3::from_row_slice(&[0, 1, 2]);
// The additional argument represents the vector dimension.
let dv = DVector::from_row_slice(&[0, 1, 2]);
let m = Matrix2x3::from_row_slice(&[0, 1, 2, 3, 4, 5]);
// The two additional arguments represent the matrix dimensions.
let dm = DMatrix::from_row_slice(2, 3, &[0, 1, 2, 3, 4, 5]);

assert!(v.x == 0 && v.y == 1 && v.z == 2);
assert!(dv[0] == 0 && dv[1] == 1 && dv[2] == 2);
assert!(m.m11 == 0 && m.m12 == 1 && m.m13 == 2 &&
        m.m21 == 3 && m.m22 == 4 && m.m23 == 5);
assert!(dm[(0, 0)] == 0 && dm[(0, 1)] == 1 && dm[(0, 2)] == 2 &&
        dm[(1, 0)] == 3 && dm[(1, 1)] == 4 && dm[(1, 2)] == 5);

pub fn from_column_slice(data: &[T]) -> Self

Creates a matrix with its elements filled with the components provided by a slice in column-major order.

Example

let v = Vector3::from_column_slice(&[0, 1, 2]);
// The additional argument represents the vector dimension.
let dv = DVector::from_column_slice(&[0, 1, 2]);
let m = Matrix2x3::from_column_slice(&[0, 1, 2, 3, 4, 5]);
// The two additional arguments represent the matrix dimensions.
let dm = DMatrix::from_column_slice(2, 3, &[0, 1, 2, 3, 4, 5]);

assert!(v.x == 0 && v.y == 1 && v.z == 2);
assert!(dv[0] == 0 && dv[1] == 1 && dv[2] == 2);
assert!(m.m11 == 0 && m.m12 == 2 && m.m13 == 4 &&
        m.m21 == 1 && m.m22 == 3 && m.m23 == 5);
assert!(dm[(0, 0)] == 0 && dm[(0, 1)] == 2 && dm[(0, 2)] == 4 &&
        dm[(1, 0)] == 1 && dm[(1, 1)] == 3 && dm[(1, 2)] == 5);

pub fn from_vec(data: Vec<T>) -> Self

Creates a matrix backed by a given Vec.

The output matrix is filled column-by-column.

Example

let m = Matrix2x3::from_vec(vec![0, 1, 2, 3, 4, 5]);

assert!(m.m11 == 0 && m.m12 == 2 && m.m13 == 4 &&
        m.m21 == 1 && m.m22 == 3 && m.m23 == 5);


// The two additional arguments represent the matrix dimensions.
let dm = DMatrix::from_vec(2, 3, vec![0, 1, 2, 3, 4, 5]);

assert!(dm[(0, 0)] == 0 && dm[(0, 1)] == 2 && dm[(0, 2)] == 4 &&
        dm[(1, 0)] == 1 && dm[(1, 1)] == 3 && dm[(1, 2)] == 5);

impl<T: Scalar, R: DimName> OMatrix<T, R, Dynamic> where
    DefaultAllocator: Allocator<T, R, Dynamic>, 

pub fn from_row_slice(data: &[T]) -> Self

Creates a matrix with its elements filled with the components provided by a slice in row-major order.

The order of elements in the slice must follow the usual mathematic writing, i.e., row-by-row.

Example

let v = Vector3::from_row_slice(&[0, 1, 2]);
// The additional argument represents the vector dimension.
let dv = DVector::from_row_slice(&[0, 1, 2]);
let m = Matrix2x3::from_row_slice(&[0, 1, 2, 3, 4, 5]);
// The two additional arguments represent the matrix dimensions.
let dm = DMatrix::from_row_slice(2, 3, &[0, 1, 2, 3, 4, 5]);

assert!(v.x == 0 && v.y == 1 && v.z == 2);
assert!(dv[0] == 0 && dv[1] == 1 && dv[2] == 2);
assert!(m.m11 == 0 && m.m12 == 1 && m.m13 == 2 &&
        m.m21 == 3 && m.m22 == 4 && m.m23 == 5);
assert!(dm[(0, 0)] == 0 && dm[(0, 1)] == 1 && dm[(0, 2)] == 2 &&
        dm[(1, 0)] == 3 && dm[(1, 1)] == 4 && dm[(1, 2)] == 5);

pub fn from_column_slice(data: &[T]) -> Self

Creates a matrix with its elements filled with the components provided by a slice in column-major order.

Example

let v = Vector3::from_column_slice(&[0, 1, 2]);
// The additional argument represents the vector dimension.
let dv = DVector::from_column_slice(&[0, 1, 2]);
let m = Matrix2x3::from_column_slice(&[0, 1, 2, 3, 4, 5]);
// The two additional arguments represent the matrix dimensions.
let dm = DMatrix::from_column_slice(2, 3, &[0, 1, 2, 3, 4, 5]);

assert!(v.x == 0 && v.y == 1 && v.z == 2);
assert!(dv[0] == 0 && dv[1] == 1 && dv[2] == 2);
assert!(m.m11 == 0 && m.m12 == 2 && m.m13 == 4 &&
        m.m21 == 1 && m.m22 == 3 && m.m23 == 5);
assert!(dm[(0, 0)] == 0 && dm[(0, 1)] == 2 && dm[(0, 2)] == 4 &&
        dm[(1, 0)] == 1 && dm[(1, 1)] == 3 && dm[(1, 2)] == 5);

pub fn from_vec(data: Vec<T>) -> Self

Creates a matrix backed by a given Vec.

The output matrix is filled column-by-column.

Example

let m = Matrix2x3::from_vec(vec![0, 1, 2, 3, 4, 5]);

assert!(m.m11 == 0 && m.m12 == 2 && m.m13 == 4 &&
        m.m21 == 1 && m.m22 == 3 && m.m23 == 5);


// The two additional arguments represent the matrix dimensions.
let dm = DMatrix::from_vec(2, 3, vec![0, 1, 2, 3, 4, 5]);

assert!(dm[(0, 0)] == 0 && dm[(0, 1)] == 2 && dm[(0, 2)] == 4 &&
        dm[(1, 0)] == 1 && dm[(1, 1)] == 3 && dm[(1, 2)] == 5);

impl<T: Scalar, C: DimName> OMatrix<T, Dynamic, C> where
    DefaultAllocator: Allocator<T, Dynamic, C>, 

pub fn from_row_slice(data: &[T]) -> Self

Creates a matrix with its elements filled with the components provided by a slice in row-major order.

The order of elements in the slice must follow the usual mathematic writing, i.e., row-by-row.

Example

let v = Vector3::from_row_slice(&[0, 1, 2]);
// The additional argument represents the vector dimension.
let dv = DVector::from_row_slice(&[0, 1, 2]);
let m = Matrix2x3::from_row_slice(&[0, 1, 2, 3, 4, 5]);
// The two additional arguments represent the matrix dimensions.
let dm = DMatrix::from_row_slice(2, 3, &[0, 1, 2, 3, 4, 5]);

assert!(v.x == 0 && v.y == 1 && v.z == 2);
assert!(dv[0] == 0 && dv[1] == 1 && dv[2] == 2);
assert!(m.m11 == 0 && m.m12 == 1 && m.m13 == 2 &&
        m.m21 == 3 && m.m22 == 4 && m.m23 == 5);
assert!(dm[(0, 0)] == 0 && dm[(0, 1)] == 1 && dm[(0, 2)] == 2 &&
        dm[(1, 0)] == 3 && dm[(1, 1)] == 4 && dm[(1, 2)] == 5);

pub fn from_column_slice(data: &[T]) -> Self

Creates a matrix with its elements filled with the components provided by a slice in column-major order.

Example

let v = Vector3::from_column_slice(&[0, 1, 2]);
// The additional argument represents the vector dimension.
let dv = DVector::from_column_slice(&[0, 1, 2]);
let m = Matrix2x3::from_column_slice(&[0, 1, 2, 3, 4, 5]);
// The two additional arguments represent the matrix dimensions.
let dm = DMatrix::from_column_slice(2, 3, &[0, 1, 2, 3, 4, 5]);

assert!(v.x == 0 && v.y == 1 && v.z == 2);
assert!(dv[0] == 0 && dv[1] == 1 && dv[2] == 2);
assert!(m.m11 == 0 && m.m12 == 2 && m.m13 == 4 &&
        m.m21 == 1 && m.m22 == 3 && m.m23 == 5);
assert!(dm[(0, 0)] == 0 && dm[(0, 1)] == 2 && dm[(0, 2)] == 4 &&
        dm[(1, 0)] == 1 && dm[(1, 1)] == 3 && dm[(1, 2)] == 5);

pub fn from_vec(data: Vec<T>) -> Self

Creates a matrix backed by a given Vec.

The output matrix is filled column-by-column.

Example

let m = Matrix2x3::from_vec(vec![0, 1, 2, 3, 4, 5]);

assert!(m.m11 == 0 && m.m12 == 2 && m.m13 == 4 &&
        m.m21 == 1 && m.m22 == 3 && m.m23 == 5);


// The two additional arguments represent the matrix dimensions.
let dm = DMatrix::from_vec(2, 3, vec![0, 1, 2, 3, 4, 5]);

assert!(dm[(0, 0)] == 0 && dm[(0, 1)] == 2 && dm[(0, 2)] == 4 &&
        dm[(1, 0)] == 1 && dm[(1, 1)] == 3 && dm[(1, 2)] == 5);

impl<T: Scalar> OMatrix<T, Dynamic, Dynamic> where
    DefaultAllocator: Allocator<T, Dynamic, Dynamic>, 

pub fn from_row_slice(nrows: usize, ncols: usize, data: &[T]) -> Self

Creates a matrix with its elements filled with the components provided by a slice in row-major order.

The order of elements in the slice must follow the usual mathematic writing, i.e., row-by-row.

Example

let v = Vector3::from_row_slice(&[0, 1, 2]);
// The additional argument represents the vector dimension.
let dv = DVector::from_row_slice(&[0, 1, 2]);
let m = Matrix2x3::from_row_slice(&[0, 1, 2, 3, 4, 5]);
// The two additional arguments represent the matrix dimensions.
let dm = DMatrix::from_row_slice(2, 3, &[0, 1, 2, 3, 4, 5]);

assert!(v.x == 0 && v.y == 1 && v.z == 2);
assert!(dv[0] == 0 && dv[1] == 1 && dv[2] == 2);
assert!(m.m11 == 0 && m.m12 == 1 && m.m13 == 2 &&
        m.m21 == 3 && m.m22 == 4 && m.m23 == 5);
assert!(dm[(0, 0)] == 0 && dm[(0, 1)] == 1 && dm[(0, 2)] == 2 &&
        dm[(1, 0)] == 3 && dm[(1, 1)] == 4 && dm[(1, 2)] == 5);

pub fn from_column_slice(nrows: usize, ncols: usize, data: &[T]) -> Self

Creates a matrix with its elements filled with the components provided by a slice in column-major order.

Example

let v = Vector3::from_column_slice(&[0, 1, 2]);
// The additional argument represents the vector dimension.
let dv = DVector::from_column_slice(&[0, 1, 2]);
let m = Matrix2x3::from_column_slice(&[0, 1, 2, 3, 4, 5]);
// The two additional arguments represent the matrix dimensions.
let dm = DMatrix::from_column_slice(2, 3, &[0, 1, 2, 3, 4, 5]);

assert!(v.x == 0 && v.y == 1 && v.z == 2);
assert!(dv[0] == 0 && dv[1] == 1 && dv[2] == 2);
assert!(m.m11 == 0 && m.m12 == 2 && m.m13 == 4 &&
        m.m21 == 1 && m.m22 == 3 && m.m23 == 5);
assert!(dm[(0, 0)] == 0 && dm[(0, 1)] == 2 && dm[(0, 2)] == 4 &&
        dm[(1, 0)] == 1 && dm[(1, 1)] == 3 && dm[(1, 2)] == 5);

pub fn from_vec(nrows: usize, ncols: usize, data: Vec<T>) -> Self

Creates a matrix backed by a given Vec.

The output matrix is filled column-by-column.

Example

let m = Matrix2x3::from_vec(vec![0, 1, 2, 3, 4, 5]);

assert!(m.m11 == 0 && m.m12 == 2 && m.m13 == 4 &&
        m.m21 == 1 && m.m22 == 3 && m.m23 == 5);


// The two additional arguments represent the matrix dimensions.
let dm = DMatrix::from_vec(2, 3, vec![0, 1, 2, 3, 4, 5]);

assert!(dm[(0, 0)] == 0 && dm[(0, 1)] == 2 && dm[(0, 2)] == 4 &&
        dm[(1, 0)] == 1 && dm[(1, 1)] == 3 && dm[(1, 2)] == 5);

impl<T: Scalar> OMatrix<T, Dynamic, Dynamic>

In-place resizing

pub fn resize_mut(&mut self, new_nrows: usize, new_ncols: usize, val: T) where
    DefaultAllocator: Reallocator<T, Dynamic, Dynamic, Dynamic, Dynamic>, 

Resizes this matrix in-place.

The values are copied such that self[(i, j)] == result[(i, j)]. If the result has more rows and/or columns than self, then the extra rows or columns are filled with val.

Defined only for owned fully-dynamic matrices, i.e., DMatrix.

impl<T: Scalar, C: Dim> OMatrix<T, Dynamic, C> where
    DefaultAllocator: Allocator<T, Dynamic, C>, 

pub fn resize_vertically_mut(&mut self, new_nrows: usize, val: T) where
    DefaultAllocator: Reallocator<T, Dynamic, C, Dynamic, C>, 

Changes the number of rows of this matrix in-place.

The values are copied such that self[(i, j)] == result[(i, j)]. If the result has more rows than self, then the extra rows are filled with val.

Defined only for owned matrices with a dynamic number of rows (for example, DVector).

impl<T: Scalar, R: Dim> OMatrix<T, R, Dynamic> where
    DefaultAllocator: Allocator<T, R, Dynamic>, 

pub fn resize_horizontally_mut(&mut self, new_ncols: usize, val: T) where
    DefaultAllocator: Reallocator<T, R, Dynamic, R, Dynamic>, 

Changes the number of column of this matrix in-place.

The values are copied such that self[(i, j)] == result[(i, j)]. If the result has more columns than self, then the extra columns are filled with val.

Defined only for owned matrices with a dynamic number of columns (for example, DVector).

impl<T: ComplexField, D> OMatrix<T, D, D> where
    D: DimMin<D, Output = D>,
    DefaultAllocator: Allocator<T, D, D> + Allocator<(usize, usize), DimMinimum<D, D>> + Allocator<T, D> + Allocator<T::RealField, D> + Allocator<T::RealField, D, D>, 

pub fn exp(&self) -> Self

Computes exponential of this matrix

Trait Implementations

impl<T, R, C> Arbitrary for OMatrix<T, R, C> where
    T: Scalar + Arbitrary,
    <T as Arbitrary>::Strategy: Clone,
    R: Dim,
    C: Dim,
    MatrixParameters<T::Parameters, R, C>: Default,
    DefaultAllocator: Allocator<T, R, C>, 

type Parameters = MatrixParameters<T::Parameters, R, C>

The type of parameters that arbitrary_with accepts for configuration of the generated Strategy. Parameters must implement Default.

fn arbitrary_with(args: Self::Parameters) -> Self::Strategy

Generates a Strategy for producing arbitrary values of type the implementing type (Self). The strategy is passed the arguments given in args.

type Strategy = MatrixStrategy<T::Strategy, R, C>

The type of Strategy used to generate values of type Self.

fn arbitrary() -> Self::Strategy

Generates a Strategy for producing arbitrary values of type the implementing type (Self).

impl<T, R: DimName, C: DimName> Bounded for OMatrix<T, R, C> where
    T: Scalar + Bounded,
    DefaultAllocator: Allocator<T, R, C>, 

fn max_value() -> Self

returns the largest finite number this type can represent

fn min_value() -> Self

returns the smallest finite number this type can represent

impl<T: Scalar + PrimitiveSimdValue, R: Dim, C: Dim> From<[Matrix<<T as SimdValue>::Element, R, C, <DefaultAllocator as Allocator<<T as SimdValue>::Element, R, C>>::Buffer>; 16]> for OMatrix<T, R, C> where
    T: From<[<T as SimdValue>::Element; 16]>,
    T::Element: Scalar + SimdValue,
    DefaultAllocator: Allocator<T, R, C> + Allocator<T::Element, R, C>, 

fn from(arr: [OMatrix<T::Element, R, C>; 16]) -> Self

Performs the conversion.

impl<T: Scalar + PrimitiveSimdValue, R: Dim, C: Dim> From<[Matrix<<T as SimdValue>::Element, R, C, <DefaultAllocator as Allocator<<T as SimdValue>::Element, R, C>>::Buffer>; 2]> for OMatrix<T, R, C> where
    T: From<[<T as SimdValue>::Element; 2]>,
    T::Element: Scalar + SimdValue,
    DefaultAllocator: Allocator<T, R, C> + Allocator<T::Element, R, C>, 

fn from(arr: [OMatrix<T::Element, R, C>; 2]) -> Self

Performs the conversion.

impl<T: Scalar + PrimitiveSimdValue, R: Dim, C: Dim> From<[Matrix<<T as SimdValue>::Element, R, C, <DefaultAllocator as Allocator<<T as SimdValue>::Element, R, C>>::Buffer>; 4]> for OMatrix<T, R, C> where
    T: From<[<T as SimdValue>::Element; 4]>,
    T::Element: Scalar + SimdValue,
    DefaultAllocator: Allocator<T, R, C> + Allocator<T::Element, R, C>, 

fn from(arr: [OMatrix<T::Element, R, C>; 4]) -> Self

Performs the conversion.

impl<T: Scalar + PrimitiveSimdValue, R: Dim, C: Dim> From<[Matrix<<T as SimdValue>::Element, R, C, <DefaultAllocator as Allocator<<T as SimdValue>::Element, R, C>>::Buffer>; 8]> for OMatrix<T, R, C> where
    T: From<[<T as SimdValue>::Element; 8]>,
    T::Element: Scalar + SimdValue,
    DefaultAllocator: Allocator<T, R, C> + Allocator<T::Element, R, C>, 

fn from(arr: [OMatrix<T::Element, R, C>; 8]) -> Self

Performs the conversion.

impl<T: SimdRealField, R, const D: usize> From<Isometry<T, R, D>> for OMatrix<T, DimNameSum<Const<D>, U1>, DimNameSum<Const<D>, U1>> where
    Const<D>: DimNameAdd<U1>,
    R: SubsetOf<OMatrix<T, DimNameSum<Const<D>, U1>, DimNameSum<Const<D>, U1>>>,
    DefaultAllocator: Allocator<T, DimNameSum<Const<D>, U1>, DimNameSum<Const<D>, U1>>, 

fn from(iso: Isometry<T, R, D>) -> Self

Performs the conversion.

impl<T: SimdRealField, R, const D: usize> From<Similarity<T, R, D>> for OMatrix<T, DimNameSum<Const<D>, U1>, DimNameSum<Const<D>, U1>> where
    Const<D>: DimNameAdd<U1>,
    R: SubsetOf<OMatrix<T, DimNameSum<Const<D>, U1>, DimNameSum<Const<D>, U1>>>,
    DefaultAllocator: Allocator<T, DimNameSum<Const<D>, U1>, DimNameSum<Const<D>, U1>>, 

fn from(sim: Similarity<T, R, D>) -> Self

Performs the conversion.

impl<T: RealField, C, const D: usize> From<Transform<T, C, D>> for OMatrix<T, DimNameSum<Const<D>, U1>, DimNameSum<Const<D>, U1>> where
    Const<D>: DimNameAdd<U1>,
    C: TCategory,
    DefaultAllocator: Allocator<T, DimNameSum<Const<D>, U1>, DimNameSum<Const<D>, U1>>, 

fn from(t: Transform<T, C, D>) -> Self

Performs the conversion.

impl<T: Scalar + Zero + One, const D: usize> From<Translation<T, D>> for OMatrix<T, DimNameSum<Const<D>, U1>, DimNameSum<Const<D>, U1>> where
    Const<D>: DimNameAdd<U1>,
    DefaultAllocator: Allocator<T, DimNameSum<Const<D>, U1>, DimNameSum<Const<D>, U1>> + Allocator<T, Const<D>>, 

fn from(t: Translation<T, D>) -> Self

Performs the conversion.

impl<T: SimdComplexField, R: Dim, C: Dim> Normed for OMatrix<T, R, C> where
    DefaultAllocator: Allocator<T, R, C>, 

type Norm = T::SimdRealField

The type of the norm.

fn norm(&self) -> T::SimdRealField

Computes the norm.

fn norm_squared(&self) -> T::SimdRealField

Computes the squared norm.

fn scale_mut(&mut self, n: Self::Norm)

Multiply self by n.

fn unscale_mut(&mut self, n: Self::Norm)

Divides self by n.

impl<T, D: DimName> One for OMatrix<T, D, D> where
    T: Scalar + Zero + One + ClosedMul + ClosedAdd,
    DefaultAllocator: Allocator<T, D, D>, 

fn one() -> Self

Returns the multiplicative identity element of Self, 1.

fn set_one(&mut self)

Sets self to the multiplicative identity element of Self, 1.

fn is_one(&self) -> bool where
    Self: PartialEq<Self>, 

Returns true if self is equal to the multiplicative identity.

impl<'a, T, D: DimName> Product<&'a Matrix<T, D, D, <DefaultAllocator as Allocator<T, D, D>>::Buffer>> for OMatrix<T, D, D> where
    T: Scalar + Zero + One + ClosedMul + ClosedAdd,
    DefaultAllocator: Allocator<T, D, D>, 

fn product<I: Iterator<Item = &'a OMatrix<T, D, D>>>(
    iter: I
) -> OMatrix<T, D, D>

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl<T, D: DimName> Product<Matrix<T, D, D, <DefaultAllocator as Allocator<T, D, D>>::Buffer>> for OMatrix<T, D, D> where
    T: Scalar + Zero + One + ClosedMul + ClosedAdd,
    DefaultAllocator: Allocator<T, D, D>, 

fn product<I: Iterator<Item = OMatrix<T, D, D>>>(iter: I) -> OMatrix<T, D, D>

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl<T, R, C> SimdValue for OMatrix<T, R, C> where
    T: Scalar + SimdValue,
    R: Dim,
    C: Dim,
    T::Element: Scalar,
    DefaultAllocator: Allocator<T, R, C> + Allocator<T::Element, R, C>, 

type Element = OMatrix<T::Element, R, C>

The type of the elements of each lane of this SIMD value.

type SimdBool = T::SimdBool

Type of the result of comparing two SIMD values like self.

fn lanes() -> usize

The number of lanes of this SIMD value.

fn splat(val: Self::Element) -> Self

Initializes an SIMD value with each lanes set to val.

fn extract(&self, i: usize) -> Self::Element

Extracts the i-th lane of self.

unsafe fn extract_unchecked(&self, i: usize) -> Self::Element

Extracts the i-th lane of self without bound-checking.

fn replace(&mut self, i: usize, val: Self::Element)

Replaces the i-th lane of self by val.

unsafe fn replace_unchecked(&mut self, i: usize, val: Self::Element)

Replaces the i-th lane of self by val without bound-checking.

fn select(self, cond: Self::SimdBool, other: Self) -> Self

Merges self and other depending on the lanes of cond.

fn map_lanes(self, f: impl Fn(Self::Element) -> Self::Element) -> Self where
    Self: Clone, 

Applies a function to each lane of self.

fn zip_map_lanes(
    self,
    b: Self,
    f: impl Fn(Self::Element, Self::Element) -> Self::Element
) -> Self where
    Self: Clone, 

Applies a function to each lane of self paired with the corresponding lane of b.

impl<T1, T2, R1, C1, R2, C2> SubsetOf<Matrix<T2, R2, C2, <DefaultAllocator as Allocator<T2, R2, C2>>::Buffer>> for OMatrix<T1, R1, C1> where
    R1: Dim,
    C1: Dim,
    R2: Dim,
    C2: Dim,
    T1: Scalar,
    T2: Scalar + SupersetOf<T1>,
    DefaultAllocator: Allocator<T2, R2, C2> + Allocator<T1, R1, C1> + SameShapeAllocator<T1, R1, C1, R2, C2>,
    ShapeConstraint: SameNumberOfRows<R1, R2> + SameNumberOfColumns<C1, C2>, 

fn to_superset(&self) -> OMatrix<T2, R2, C2>

The inclusion map: converts self to the equivalent element of its superset.

fn is_in_subset(m: &OMatrix<T2, R2, C2>) -> bool

Checks if element is actually part of the subset Self (and can be converted to it).

fn from_superset_unchecked(m: &OMatrix<T2, R2, C2>) -> Self

Use with care! Same as self.to_superset but without any property checks. Always succeeds.

fn from_superset(element: &T) -> Option<Self>

The inverse inclusion map: attempts to construct self from the equivalent element of its superset.

impl<'a, T, C: Dim> Sum<&'a Matrix<T, Dynamic, C, <DefaultAllocator as Allocator<T, Dynamic, C>>::Buffer>> for OMatrix<T, Dynamic, C> where
    T: Scalar + ClosedAdd + Zero,
    DefaultAllocator: Allocator<T, Dynamic, C>, 

fn sum<I: Iterator<Item = &'a OMatrix<T, Dynamic, C>>>(
    iter: I
) -> OMatrix<T, Dynamic, C>

Example

let v = &DVector::repeat(3, 1.0f64);

assert_eq!(vec![v, v, v].into_iter().sum::<DVector<f64>>(),
           v + v + v);

Panics

Panics if the iterator is empty:

iter::empty::<&DMatrix<f64>>().sum::<DMatrix<f64>>(); // panics!

impl<'a, T, R: DimName, C: DimName> Sum<&'a Matrix<T, R, C, <DefaultAllocator as Allocator<T, R, C>>::Buffer>> for OMatrix<T, R, C> where
    T: Scalar + ClosedAdd + Zero,
    DefaultAllocator: Allocator<T, R, C>, 

fn sum<I: Iterator<Item = &'a OMatrix<T, R, C>>>(iter: I) -> OMatrix<T, R, C>

Method which takes an iterator and generates Self from the elements by “summing up” the items.

impl<T, C: Dim> Sum<Matrix<T, Dynamic, C, <DefaultAllocator as Allocator<T, Dynamic, C>>::Buffer>> for OMatrix<T, Dynamic, C> where
    T: Scalar + ClosedAdd + Zero,
    DefaultAllocator: Allocator<T, Dynamic, C>, 

fn sum<I: Iterator<Item = OMatrix<T, Dynamic, C>>>(
    iter: I
) -> OMatrix<T, Dynamic, C>

Example

assert_eq!(vec![DVector::repeat(3, 1.0f64),
                DVector::repeat(3, 1.0f64),
                DVector::repeat(3, 1.0f64)].into_iter().sum::<DVector<f64>>(),
           DVector::repeat(3, 1.0f64) + DVector::repeat(3, 1.0f64) + DVector::repeat(3, 1.0f64));

Panics

Panics if the iterator is empty:

iter::empty::<DMatrix<f64>>().sum::<DMatrix<f64>>(); // panics!

impl<T, R: DimName, C: DimName> Sum<Matrix<T, R, C, <DefaultAllocator as Allocator<T, R, C>>::Buffer>> for OMatrix<T, R, C> where
    T: Scalar + ClosedAdd + Zero,
    DefaultAllocator: Allocator<T, R, C>, 

fn sum<I: Iterator<Item = OMatrix<T, R, C>>>(iter: I) -> OMatrix<T, R, C>

Method which takes an iterator and generates Self from the elements by “summing up” the items.

impl<T, R: DimName, C: DimName> Zero for OMatrix<T, R, C> where
    T: Scalar + Zero + ClosedAdd,
    DefaultAllocator: Allocator<T, R, C>, 

fn zero() -> Self

Returns the additive identity element of Self, 0.

fn is_zero(&self) -> bool

Returns true if self is equal to the additive identity.

fn set_zero(&mut self)

Sets self to the additive identity element of Self, 0.