[−][src]Struct rusoto_elbv2::CreateLoadBalancerInput
Fields
ip_address_type: Option<String>
[Application Load Balancers] The type of IP addresses used by the subnets for your load balancer. The possible values are ipv4
(for IPv4 addresses) and dualstack
(for IPv4 and IPv6 addresses). Internal load balancers must use ipv4
.
name: String
The name of the load balancer.
This name must be unique per region per account, can have a maximum of 32 characters, must contain only alphanumeric characters or hyphens, must not begin or end with a hyphen, and must not begin with "internal-".
scheme: Option<String>
The nodes of an Internet-facing load balancer have public IP addresses. The DNS name of an Internet-facing load balancer is publicly resolvable to the public IP addresses of the nodes. Therefore, Internet-facing load balancers can route requests from clients over the internet.
The nodes of an internal load balancer have only private IP addresses. The DNS name of an internal load balancer is publicly resolvable to the private IP addresses of the nodes. Therefore, internal load balancers can route requests only from clients with access to the VPC for the load balancer.
The default is an Internet-facing load balancer.
security_groups: Option<Vec<String>>
[Application Load Balancers] The IDs of the security groups for the load balancer.
subnet_mappings: Option<Vec<SubnetMapping>>
The IDs of the public subnets. You can specify only one subnet per Availability Zone. You must specify either subnets or subnet mappings.
[Application Load Balancers] You must specify subnets from at least two Availability Zones. You cannot specify Elastic IP addresses for your subnets.
[Network Load Balancers] You can specify subnets from one or more Availability Zones. You can specify one Elastic IP address per subnet if you need static IP addresses for your internet-facing load balancer. For internal load balancers, you can specify one private IP address per subnet from the IPv4 range of the subnet.
subnets: Option<Vec<String>>
The IDs of the public subnets. You can specify only one subnet per Availability Zone. You must specify either subnets or subnet mappings.
[Application Load Balancers] You must specify subnets from at least two Availability Zones.
[Network Load Balancers] You can specify subnets from one or more Availability Zones.
One or more tags to assign to the load balancer.
type_: Option<String>
The type of load balancer. The default is application
.
Trait Implementations
impl Clone for CreateLoadBalancerInput
[src]
pub fn clone(&self) -> CreateLoadBalancerInput
[src]
pub fn clone_from(&mut self, source: &Self)
1.0.0[src]
impl Debug for CreateLoadBalancerInput
[src]
impl Default for CreateLoadBalancerInput
[src]
pub fn default() -> CreateLoadBalancerInput
[src]
impl PartialEq<CreateLoadBalancerInput> for CreateLoadBalancerInput
[src]
pub fn eq(&self, other: &CreateLoadBalancerInput) -> bool
[src]
pub fn ne(&self, other: &CreateLoadBalancerInput) -> bool
[src]
impl StructuralPartialEq for CreateLoadBalancerInput
[src]
Auto Trait Implementations
impl RefUnwindSafe for CreateLoadBalancerInput
[src]
impl Send for CreateLoadBalancerInput
[src]
impl Sync for CreateLoadBalancerInput
[src]
impl Unpin for CreateLoadBalancerInput
[src]
impl UnwindSafe for CreateLoadBalancerInput
[src]
Blanket Implementations
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Borrow<T> for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
[src]
T: ?Sized,
pub fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> From<T> for T
[src]
impl<T> Instrument for T
[src]
pub fn instrument(self, span: Span) -> Instrumented<Self>
[src]
pub fn in_current_span(self) -> Instrumented<Self>
[src]
impl<T> Instrument for T
[src]
pub fn instrument(self, span: Span) -> Instrumented<Self>
[src]
pub fn in_current_span(self) -> Instrumented<Self>
[src]
impl<T, U> Into<U> for T where
U: From<T>,
[src]
U: From<T>,
impl<T> Same<T> for T
type Output = T
Should always be Self
impl<T> ToOwned for T where
T: Clone,
[src]
T: Clone,
type Owned = T
The resulting type after obtaining ownership.
pub fn to_owned(&self) -> T
[src]
pub fn clone_into(&self, target: &mut T)
[src]
impl<T, U> TryFrom<U> for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
pub fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> TryInto<U> for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,