[−][src]Struct mpu6050::Mpu6050
Handles all operations on/with Mpu6050
Methods
impl<I, D, E> Mpu6050<I, D> where
I: Write<Error = E> + WriteRead<Error = E>,
D: DelayMs<u8>,
[src]
I: Write<Error = E> + WriteRead<Error = E>,
D: DelayMs<u8>,
pub fn new(i2c: I, delay: D) -> Self
[src]
Side effect free constructor with default sensitivies, no calibration
pub fn new_with_sens(
i2c: I,
delay: D,
arange: AccelRange,
grange: GyroRange
) -> Self
[src]
i2c: I,
delay: D,
arange: AccelRange,
grange: GyroRange
) -> Self
custom sensitivity
pub fn soft_calib(&mut self, steps: u8) -> Result<(), Error<E>>
[src]
Performs software calibration with steps number of readings. Readings must be made with MPU6050 in resting position
pub fn wake(&mut self) -> Result<(), Error<E>>
[src]
Wakes MPU6050 with all sensors enabled (default)
pub fn init(&mut self) -> Result<(), Error<E>>
[src]
Init wakes MPU6050 and verifies register addr, e.g. in i2c
pub fn verify(&mut self) -> Result<(), Error<E>>
[src]
Verifies device to address 0x68 with WHOAMI Register
pub fn get_acc_angles(&mut self) -> Result<(f32, f32), Error<E>>
[src]
Roll and pitch estimation from raw accelerometer readings NOTE: no yaw! no magnetometer present on MPU6050
pub fn get_acc(&mut self) -> Result<(f32, f32, f32), Error<E>>
[src]
Accelerometer readings in m/s^2
pub fn get_gyro(&mut self) -> Result<(f32, f32, f32), Error<E>>
[src]
Gyro readings in rad/s
pub fn get_temp(&mut self) -> Result<f32, Error<E>>
[src]
Temp in degrees celcius
pub fn write_u8(&mut self, reg: u8, byte: u8) -> Result<(), Error<E>>
[src]
Writes byte to register
pub fn read_u8(&mut self, reg: u8) -> Result<u8, Error<E>>
[src]
Reads byte from register
pub fn read_bytes(&mut self, reg: u8, buf: &mut [u8]) -> Result<(), Error<E>>
[src]
Reads series of bytes into buf from specified reg
Auto Trait Implementations
impl<I, D> Send for Mpu6050<I, D> where
D: Send,
I: Send,
D: Send,
I: Send,
impl<I, D> Sync for Mpu6050<I, D> where
D: Sync,
I: Sync,
D: Sync,
I: Sync,
Blanket Implementations
impl<T> From for T
[src]
impl<T, U> TryFrom for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<T, U> Into for T where
U: From<T>,
[src]
U: From<T>,
impl<T> Borrow for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,