[−]Struct morningstar::prostar_mppt::ArrayFaults
Methods
impl ArrayFaults
pub const OVER_CURRENT: ArrayFaults
pub const MOSFET_SHORTED: ArrayFaults
pub const SOFTWARE: ArrayFaults
pub const BATTERY_HVD: ArrayFaults
pub const ARRAY_HVD: ArrayFaults
pub const CUSTOM_SETTINGS_EDIT: ArrayFaults
pub const RTS_SHORTED: ArrayFaults
pub const RTS_NO_LONGER_VALID: ArrayFaults
pub const LOCAL_TEMP_SENSOR_DAMAGED: ArrayFaults
pub const BATTERY_LOW_VOLTAGE_DISCONNECT: ArrayFaults
pub const SLAVE_TIMEOUT: ArrayFaults
pub const DIP_SWITCH_CHANGED: ArrayFaults
pub const FAULT13: ArrayFaults
pub const FAULT14: ArrayFaults
pub const FAULT15: ArrayFaults
pub const FAULT16: ArrayFaults
pub const fn empty() -> ArrayFaults
Returns an empty set of flags
pub const fn all() -> ArrayFaults
Returns the set containing all flags.
pub const fn bits(&self) -> u16
Returns the raw value of the flags currently stored.
pub fn from_bits(bits: u16) -> Option<ArrayFaults>
Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.
pub const fn from_bits_truncate(bits: u16) -> ArrayFaults
Convert from underlying bit representation, dropping any bits that do not correspond to flags.
pub const fn is_empty(&self) -> bool
Returns true
if no flags are currently stored.
pub const fn is_all(&self) -> bool
Returns true
if all flags are currently set.
pub const fn intersects(&self, other: ArrayFaults) -> bool
Returns true
if there are flags common to both self
and other
.
pub const fn contains(&self, other: ArrayFaults) -> bool
Returns true
all of the flags in other
are contained within self
.
pub fn insert(&mut self, other: ArrayFaults)
Inserts the specified flags in-place.
pub fn remove(&mut self, other: ArrayFaults)
Removes the specified flags in-place.
pub fn toggle(&mut self, other: ArrayFaults)
Toggles the specified flags in-place.
pub fn set(&mut self, other: ArrayFaults, value: bool)
Inserts or removes the specified flags depending on the passed value.
Trait Implementations
impl PartialOrd<ArrayFaults> for ArrayFaults
fn partial_cmp(&self, other: &ArrayFaults) -> Option<Ordering>
fn lt(&self, other: &ArrayFaults) -> bool
fn le(&self, other: &ArrayFaults) -> bool
fn gt(&self, other: &ArrayFaults) -> bool
fn ge(&self, other: &ArrayFaults) -> bool
impl PartialEq<ArrayFaults> for ArrayFaults
fn eq(&self, other: &ArrayFaults) -> bool
fn ne(&self, other: &ArrayFaults) -> bool
impl Copy for ArrayFaults
impl Ord for ArrayFaults
fn cmp(&self, other: &ArrayFaults) -> Ordering
fn max(self, other: Self) -> Self
1.21.0[src]
Compares and returns the maximum of two values. Read more
fn min(self, other: Self) -> Self
1.21.0[src]
Compares and returns the minimum of two values. Read more
fn clamp(self, min: Self, max: Self) -> Self
[src]
clamp
)Restrict a value to a certain interval. Read more
impl Eq for ArrayFaults
impl Extend<ArrayFaults> for ArrayFaults
fn extend<T: IntoIterator<Item = ArrayFaults>>(&mut self, iterator: T)
impl Default for ArrayFaults
[src]
fn default() -> ArrayFaults
[src]
impl Clone for ArrayFaults
fn clone(&self) -> ArrayFaults
fn clone_from(&mut self, source: &Self)
1.0.0[src]
Performs copy-assignment from source
. Read more
impl Hash for ArrayFaults
fn hash<__H: Hasher>(&self, state: &mut __H)
fn hash_slice<H>(data: &[Self], state: &mut H) where
H: Hasher,
1.3.0[src]
H: Hasher,
Feeds a slice of this type into the given [Hasher
]. Read more
impl Sub<ArrayFaults> for ArrayFaults
type Output = ArrayFaults
The resulting type after applying the -
operator.
fn sub(self, other: ArrayFaults) -> ArrayFaults
Returns the set difference of the two sets of flags.
impl SubAssign<ArrayFaults> for ArrayFaults
fn sub_assign(&mut self, other: ArrayFaults)
Disables all flags enabled in the set.
impl Not for ArrayFaults
type Output = ArrayFaults
The resulting type after applying the !
operator.
fn not(self) -> ArrayFaults
Returns the complement of this set of flags.
impl BitAnd<ArrayFaults> for ArrayFaults
type Output = ArrayFaults
The resulting type after applying the &
operator.
fn bitand(self, other: ArrayFaults) -> ArrayFaults
Returns the intersection between the two sets of flags.
impl BitOr<ArrayFaults> for ArrayFaults
type Output = ArrayFaults
The resulting type after applying the |
operator.
fn bitor(self, other: ArrayFaults) -> ArrayFaults
Returns the union of the two sets of flags.
impl BitXor<ArrayFaults> for ArrayFaults
type Output = ArrayFaults
The resulting type after applying the ^
operator.
fn bitxor(self, other: ArrayFaults) -> ArrayFaults
Returns the left flags, but with all the right flags toggled.
impl BitAndAssign<ArrayFaults> for ArrayFaults
fn bitand_assign(&mut self, other: ArrayFaults)
Disables all flags disabled in the set.
impl BitOrAssign<ArrayFaults> for ArrayFaults
fn bitor_assign(&mut self, other: ArrayFaults)
Adds the set of flags.
impl BitXorAssign<ArrayFaults> for ArrayFaults
fn bitxor_assign(&mut self, other: ArrayFaults)
Toggles the set of flags.
impl Debug for ArrayFaults
impl FromIterator<ArrayFaults> for ArrayFaults
fn from_iter<T: IntoIterator<Item = ArrayFaults>>(iterator: T) -> ArrayFaults
impl Octal for ArrayFaults
impl Binary for ArrayFaults
impl LowerHex for ArrayFaults
impl UpperHex for ArrayFaults
impl Serialize for ArrayFaults
[src]
fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error> where
__S: Serializer,
[src]
__S: Serializer,
impl<'de> Deserialize<'de> for ArrayFaults
[src]
fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error> where
__D: Deserializer<'de>,
[src]
__D: Deserializer<'de>,
Auto Trait Implementations
impl Send for ArrayFaults
impl Unpin for ArrayFaults
impl Sync for ArrayFaults
impl UnwindSafe for ArrayFaults
impl RefUnwindSafe for ArrayFaults
Blanket Implementations
impl<T> ToOwned for T where
T: Clone,
[src]
T: Clone,
type Owned = T
The resulting type after obtaining ownership.
fn to_owned(&self) -> T
[src]
fn clone_into(&self, target: &mut T)
[src]
impl<T> From<T> for T
[src]
impl<T, U> Into<U> for T where
U: From<T>,
[src]
U: From<T>,
impl<T, U> TryFrom<U> for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> TryInto<U> for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<T> BorrowMut<T> for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> Borrow<T> for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Same<T> for T
type Output = T
Should always be Self
impl<T> DeserializeOwned for T where
T: Deserialize<'de>,
[src]
T: Deserialize<'de>,