Struct mio::net::UnixStream

pub struct UnixStream { /* fields omitted */ }

This is supported on feature="tcp" or feature="udp" or feature="uds" only.

A non-blocking Unix stream socket.

Methods

impl UnixStream

pub fn connect<P: AsRef<Path>>(path: P) -> Result<UnixStream>

This is supported on (feature="tcp" or feature="udp" or feature="uds") and feature="uds" only.

Connects to the socket named by path.

Important traits for UnixStream

impl Read for UnixStreamimpl<'a> Read for &'a UnixStreamimpl Write for UnixStreamimpl<'a> Write for &'a UnixStream

pub fn from_std(stream: UnixStream) -> UnixStream

This is supported on (feature="tcp" or feature="udp" or feature="uds") and feature="uds" only.

Creates a new UnixStream from a standard net::UnixStream.

This function is intended to be used to wrap a Unix stream from the standard library in the Mio equivalent. The conversion assumes nothing about the underlying stream; it is left up to the user to set it in non-blocking mode.

Note

The Unix stream here will not have connect called on it, so it should already be connected via some other means (be it manually, or the standard library).

pub fn pair() -> Result<(UnixStream, UnixStream)>

This is supported on (feature="tcp" or feature="udp" or feature="uds") and feature="uds" only.

Creates an unnamed pair of connected sockets.

Returns two UnixStreams which are connected to each other.

pub fn local_addr(&self) -> Result<SocketAddr>

This is supported on (feature="tcp" or feature="udp" or feature="uds") and feature="uds" only.

Returns the socket address of the local half of this connection.

pub fn peer_addr(&self) -> Result<SocketAddr>

This is supported on (feature="tcp" or feature="udp" or feature="uds") and feature="uds" only.

Returns the socket address of the remote half of this connection.

pub fn take_error(&self) -> Result<Option<Error>>

This is supported on (feature="tcp" or feature="udp" or feature="uds") and feature="uds" only.

Returns the value of the SO_ERROR option.

pub fn shutdown(&self, how: Shutdown) -> Result<()>

This is supported on (feature="tcp" or feature="udp" or feature="uds") and feature="uds" only.

Shuts down the read, write, or both halves of this connection.

This function will cause all pending and future I/O calls on the specified portions to immediately return with an appropriate value (see the documentation of Shutdown).

Trait Implementations

impl AsRawFd for UnixStream

fn as_raw_fd(&self) -> RawFd

Extracts the raw file descriptor.

impl Debug for UnixStream

fn fmt(&self, f: &mut Formatter) -> Result

Formats the value using the given formatter.

impl FromRawFd for UnixStream

Important traits for UnixStream

impl Read for UnixStreamimpl<'a> Read for &'a UnixStreamimpl Write for UnixStreamimpl<'a> Write for &'a UnixStream

unsafe fn from_raw_fd(fd: RawFd) -> UnixStream

Converts a RawFd to a UnixStream.

Notes

The caller is responsible for ensuring that the socket is in non-blocking mode.

impl IntoRawFd for UnixStream

fn into_raw_fd(self) -> RawFd

Consumes this object, returning the raw underlying file descriptor.

impl Read for UnixStream

fn read(&mut self, buf: &mut [u8]) -> Result<usize>

Pull some bytes from this source into the specified buffer, returning how many bytes were read.

fn read_vectored(&mut self, bufs: &mut [IoSliceMut]) -> Result<usize>

Like read, except that it reads into a slice of buffers.

unsafe fn initializer(&self) -> Initializer

🔬 This is a nightly-only experimental API. (read_initializer)

Determines if this Reader can work with buffers of uninitialized memory.

fn read_to_end(&mut self, buf: &mut Vec<u8>) -> Result<usize, Error>

Read all bytes until EOF in this source, placing them into buf.

fn read_to_string(&mut self, buf: &mut String) -> Result<usize, Error>

Read all bytes until EOF in this source, appending them to buf.

fn read_exact(&mut self, buf: &mut [u8]) -> Result<(), Error>

Read the exact number of bytes required to fill buf.

fn by_ref(&mut self) -> &mut Self

Creates a "by reference" adaptor for this instance of Read.

fn bytes(self) -> Bytes<Self>

Transforms this Read instance to an [Iterator] over its bytes.

fn chain<R>(self, next: R) -> Chain<Self, R> where
    R: Read, 

Creates an adaptor which will chain this stream with another.

fn take(self, limit: u64) -> Take<Self>

Creates an adaptor which will read at most limit bytes from it.

impl<'a> Read for &'a UnixStream

fn read(&mut self, buf: &mut [u8]) -> Result<usize>

Pull some bytes from this source into the specified buffer, returning how many bytes were read.

fn read_vectored(&mut self, bufs: &mut [IoSliceMut]) -> Result<usize>

Like read, except that it reads into a slice of buffers.

unsafe fn initializer(&self) -> Initializer

🔬 This is a nightly-only experimental API. (read_initializer)

Determines if this Reader can work with buffers of uninitialized memory.

fn read_to_end(&mut self, buf: &mut Vec<u8>) -> Result<usize, Error>

Read all bytes until EOF in this source, placing them into buf.

fn read_to_string(&mut self, buf: &mut String) -> Result<usize, Error>

Read all bytes until EOF in this source, appending them to buf.

fn read_exact(&mut self, buf: &mut [u8]) -> Result<(), Error>

Read the exact number of bytes required to fill buf.

fn by_ref(&mut self) -> &mut Self

Creates a "by reference" adaptor for this instance of Read.

fn bytes(self) -> Bytes<Self>

Transforms this Read instance to an [Iterator] over its bytes.

fn chain<R>(self, next: R) -> Chain<Self, R> where
    R: Read, 

Creates an adaptor which will chain this stream with another.

fn take(self, limit: u64) -> Take<Self>

Creates an adaptor which will read at most limit bytes from it.

impl Source for UnixStream

fn register(
    &mut self,
    registry: &Registry,
    token: Token,
    interests: Interest
) -> Result<()>

Register self with the given Registry instance.

fn reregister(
    &mut self,
    registry: &Registry,
    token: Token,
    interests: Interest
) -> Result<()>

Re-register self with the given Registry instance.

fn deregister(&mut self, registry: &Registry) -> Result<()>

Deregister self from the given Registry instance.

impl Write for UnixStream

fn write(&mut self, buf: &[u8]) -> Result<usize>

Write a buffer into this writer, returning how many bytes were written.

fn write_vectored(&mut self, bufs: &[IoSlice]) -> Result<usize>

Like write, except that it writes from a slice of buffers.

fn flush(&mut self) -> Result<()>

Flush this output stream, ensuring that all intermediately buffered contents reach their destination.

fn write_all(&mut self, buf: &[u8]) -> Result<(), Error>

Attempts to write an entire buffer into this writer.

fn write_fmt(&mut self, fmt: Arguments) -> Result<(), Error>

Writes a formatted string into this writer, returning any error encountered.

fn by_ref(&mut self) -> &mut Self

Creates a "by reference" adaptor for this instance of Write.

impl<'a> Write for &'a UnixStream

fn write(&mut self, buf: &[u8]) -> Result<usize>

Write a buffer into this writer, returning how many bytes were written.

fn write_vectored(&mut self, bufs: &[IoSlice]) -> Result<usize>

Like write, except that it writes from a slice of buffers.

fn flush(&mut self) -> Result<()>

Flush this output stream, ensuring that all intermediately buffered contents reach their destination.

fn write_all(&mut self, buf: &[u8]) -> Result<(), Error>

Attempts to write an entire buffer into this writer.

fn write_fmt(&mut self, fmt: Arguments) -> Result<(), Error>

Writes a formatted string into this writer, returning any error encountered.

fn by_ref(&mut self) -> &mut Self

Creates a "by reference" adaptor for this instance of Write.