Struct mio_serial::windows::Serial

pub struct Serial { /* fields omitted */ }

Windows serial port

Methods

impl Serial

fn from_path<T: AsRef<Path>>(
    path: T,
    settings: &SerialPortSettings
) -> Result<Self>

Opens a COM port at the specified path

Trait Implementations

impl SerialPort for Serial

fn settings(&self) -> SerialPortSettings

Returns a struct with the current port settings

fn port_name(&self) -> Option<String>

Return the name associated with the serial port, if known.

fn baud_rate(&self) -> Option<BaudRate>

Returns the current baud rate.

This function returns None if the baud rate could not be determined. This may occur if the hardware is in an uninitialized state. Setting a baud rate with set_baud_rate() should initialize the baud rate to a supported value.

fn data_bits(&self) -> Option<DataBits>

Returns the character size.

This function returns None if the character size could not be determined. This may occur if the hardware is in an uninitialized state or is using a non-standard character size. Setting a baud rate with set_char_size() should initialize the character size to a supported value.

fn flow_control(&self) -> Option<FlowControl>

Returns the flow control mode.

This function returns None if the flow control mode could not be determined. This may occur if the hardware is in an uninitialized state or is using an unsupported flow control mode. Setting a flow control mode with set_flow_control() should initialize the flow control mode to a supported value.

fn parity(&self) -> Option<Parity>

Returns the parity-checking mode.

This function returns None if the parity mode could not be determined. This may occur if the hardware is in an uninitialized state or is using a non-standard parity mode. Setting a parity mode with set_parity() should initialize the parity mode to a supported value.

fn stop_bits(&self) -> Option<StopBits>

Returns the number of stop bits.

This function returns None if the number of stop bits could not be determined. This may occur if the hardware is in an uninitialized state or is using an unsupported stop bit configuration. Setting the number of stop bits with set_stop-bits() should initialize the stop bits to a supported value.

fn timeout(&self) -> Duration

Returns the current timeout.

fn set_all(&mut self, settings: &SerialPortSettings) -> Result<()>

Applies all settings for a struct. This isn't guaranteed to involve only a single call into the driver, though that may be done on some platforms.

fn set_baud_rate(&mut self, baud_rate: BaudRate) -> Result<()>

Sets the baud rate.

Errors

If the implementation does not support the requested baud rate, this function may return an InvalidInput error. Even if the baud rate is accepted by set_baud_rate(), it may not be supported by the underlying hardware.

fn set_data_bits(&mut self, data_bits: DataBits) -> Result<()>

Sets the character size.

fn set_flow_control(&mut self, flow_control: FlowControl) -> Result<()>

Sets the flow control mode.

fn set_parity(&mut self, parity: Parity) -> Result<()>

Sets the parity-checking mode.

fn set_stop_bits(&mut self, stop_bits: StopBits) -> Result<()>

Sets the number of stop bits.

fn set_timeout(&mut self, _: Duration) -> Result<()>

Sets the timeout for future I/O operations. This parameter is ignored but required for trait completeness.

fn write_request_to_send(&mut self, level: bool) -> Result<()>

Sets the state of the RTS (Request To Send) control signal.

Setting a value of true asserts the RTS control signal. false clears the signal.

Errors

This function returns an error if the RTS control signal could not be set to the desired state on the underlying hardware:

• NoDevice if the device was disconnected.
• Io for any other type of I/O error.

fn write_data_terminal_ready(&mut self, level: bool) -> Result<()>

Writes to the Data Terminal Ready pin

Setting a value of true asserts the DTR control signal. false clears the signal.

Errors

This function returns an error if the DTR control signal could not be set to the desired state on the underlying hardware:

• NoDevice if the device was disconnected.
• Io for any other type of I/O error.

fn read_clear_to_send(&mut self) -> Result<bool>

Reads the state of the CTS (Clear To Send) control signal.

This function returns a boolean that indicates whether the CTS control signal is asserted.

Errors

This function returns an error if the state of the CTS control signal could not be read from the underlying hardware:

• NoDevice if the device was disconnected.
• Io for any other type of I/O error.

fn read_data_set_ready(&mut self) -> Result<bool>

Reads the state of the Data Set Ready control signal.

This function returns a boolean that indicates whether the DSR control signal is asserted.

Errors

This function returns an error if the state of the DSR control signal could not be read from the underlying hardware:

• NoDevice if the device was disconnected.
• Io for any other type of I/O error.

fn read_ring_indicator(&mut self) -> Result<bool>

Reads the state of the Ring Indicator control signal.

This function returns a boolean that indicates whether the RI control signal is asserted.

Errors

This function returns an error if the state of the RI control signal could not be read from the underlying hardware:

• NoDevice if the device was disconnected.
• Io for any other type of I/O error.

fn read_carrier_detect(&mut self) -> Result<bool>

Reads the state of the Carrier Detect control signal.

This function returns a boolean that indicates whether the CD control signal is asserted.

Errors

This function returns an error if the state of the CD control signal could not be read from the underlying hardware:

• NoDevice if the device was disconnected.
• Io for any other type of I/O error.

impl Read for Serial

fn read(&mut self, bytes: &mut [u8]) -> Result<usize>

Pull some bytes from this source into the specified buffer, returning how many bytes were read.

unsafe fn initializer(&self) -> Initializer

🔬 This is a nightly-only experimental API. (read_initializer)

Determines if this Reader can work with buffers of uninitialized memory.

fn read_to_end(&mut self, buf: &mut Vec<u8>) -> Result<usize, Error>

Read all bytes until EOF in this source, placing them into buf.

fn read_to_string(&mut self, buf: &mut String) -> Result<usize, Error>

Read all bytes until EOF in this source, placing them into buf.

fn read_exact(&mut self, buf: &mut [u8]) -> Result<(), Error>

Read the exact number of bytes required to fill buf.

fn by_ref(&mut self) -> &mut Self

Creates a "by reference" adaptor for this instance of Read.

fn bytes(self) -> Bytes<Self>

Transforms this Read instance to an [Iterator] over its bytes.

fn chars(self) -> Chars<Self>

🔬 This is a nightly-only experimental API. (io)

the semantics of a partial read/write of where errors happen is currently unclear and may change

Transforms this Read instance to an [Iterator] over [char]s.

fn chain<R>(self, next: R) -> Chain<Self, R> where
    R: Read, 

Creates an adaptor which will chain this stream with another.

fn take(self, limit: u64) -> Take<Self>

Creates an adaptor which will read at most limit bytes from it.

impl Write for Serial

fn write(&mut self, bytes: &[u8]) -> Result<usize>

Write a buffer into this object, returning how many bytes were written.

fn flush(&mut self) -> Result<()>

Flush this output stream, ensuring that all intermediately buffered contents reach their destination.

fn write_all(&mut self, buf: &[u8]) -> Result<(), Error>

Attempts to write an entire buffer into this write.

fn write_fmt(&mut self, fmt: Arguments) -> Result<(), Error>

Writes a formatted string into this writer, returning any error encountered.

fn by_ref(&mut self) -> &mut Self

Creates a "by reference" adaptor for this instance of Write.

impl Evented for Serial

fn register(
    &self,
    poll: &Poll,
    token: Token,
    interest: Ready,
    opts: PollOpt
) -> Result<()>

Register self with the given Poll instance.

fn reregister(
    &self,
    poll: &Poll,
    token: Token,
    interest: Ready,
    opts: PollOpt
) -> Result<()>

Re-register self with the given Poll instance.

fn deregister(&self, poll: &Poll) -> Result<()>

Deregister self from the given Poll instance