Struct microbit::hal::pac::saadc::RegisterBlock [−]
#[repr(C)]pub struct RegisterBlock {}Show fields
pub tasks_start: Reg<u32, _TASKS_START>, pub tasks_sample: Reg<u32, _TASKS_SAMPLE>, pub tasks_stop: Reg<u32, _TASKS_STOP>, pub tasks_calibrateoffset: Reg<u32, _TASKS_CALIBRATEOFFSET>, pub events_started: Reg<u32, _EVENTS_STARTED>, pub events_end: Reg<u32, _EVENTS_END>, pub events_done: Reg<u32, _EVENTS_DONE>, pub events_resultdone: Reg<u32, _EVENTS_RESULTDONE>, pub events_calibratedone: Reg<u32, _EVENTS_CALIBRATEDONE>, pub events_stopped: Reg<u32, _EVENTS_STOPPED>, pub events_ch: [EVENTS_CH; 8], pub inten: Reg<u32, _INTEN>, pub intenset: Reg<u32, _INTENSET>, pub intenclr: Reg<u32, _INTENCLR>, pub status: Reg<u32, _STATUS>, pub enable: Reg<u32, _ENABLE>, pub ch: [CH; 8], pub resolution: Reg<u32, _RESOLUTION>, pub oversample: Reg<u32, _OVERSAMPLE>, pub samplerate: Reg<u32, _SAMPLERATE>, pub result: RESULT, // some fields omitted
Expand description
Register block
Fields
tasks_start: Reg<u32, _TASKS_START>
0x00 - Starts the SAADC and prepares the result buffer in RAM
tasks_sample: Reg<u32, _TASKS_SAMPLE>
0x04 - Takes one SAADC sample
tasks_stop: Reg<u32, _TASKS_STOP>
0x08 - Stops the SAADC and terminates all on-going conversions
tasks_calibrateoffset: Reg<u32, _TASKS_CALIBRATEOFFSET>
0x0c - Starts offset auto-calibration
events_started: Reg<u32, _EVENTS_STARTED>
0x100 - The SAADC has started
events_end: Reg<u32, _EVENTS_END>
0x104 - The SAADC has filled up the result buffer
events_done: Reg<u32, _EVENTS_DONE>
0x108 - A conversion task has been completed. Depending on the configuration, multiple conversions might be needed for a result to be transferred to RAM.
events_resultdone: Reg<u32, _EVENTS_RESULTDONE>
0x10c - Result ready for transfer to RAM
events_calibratedone: Reg<u32, _EVENTS_CALIBRATEDONE>
0x110 - Calibration is complete
events_stopped: Reg<u32, _EVENTS_STOPPED>
0x114 - The SAADC has stopped
events_ch: [EVENTS_CH; 8]
0x118 - Peripheral events.
inten: Reg<u32, _INTEN>
0x300 - Enable or disable interrupt
intenset: Reg<u32, _INTENSET>
0x304 - Enable interrupt
intenclr: Reg<u32, _INTENCLR>
0x308 - Disable interrupt
status: Reg<u32, _STATUS>
0x400 - Status
enable: Reg<u32, _ENABLE>
0x500 - Enable or disable SAADC
ch: [CH; 8]
0x510 - Unspecified
resolution: Reg<u32, _RESOLUTION>
0x5f0 - Resolution configuration
oversample: Reg<u32, _OVERSAMPLE>
0x5f4 - Oversampling configuration. The RESOLUTION is applied before averaging, thus for high OVERSAMPLE a higher RESOLUTION should be used.
samplerate: Reg<u32, _SAMPLERATE>
0x5f8 - Controls normal or continuous sample rate
result: RESULT
0x62c - RESULT EasyDMA channel
Auto Trait Implementations
Blanket Implementations
impl<T> BorrowMut<T> for T where
T: ?Sized,
[src]
impl<T> BorrowMut<T> for T where
T: ?Sized,
[src]pub fn borrow_mut(&mut self) -> &mut T
[src]
pub fn borrow_mut(&mut self) -> &mut T
[src]Mutably borrows from an owned value. Read more
impl<T> CheckedAs for T
[src]
impl<T> CheckedAs for T
[src]pub fn checked_as<Dst>(self) -> Option<Dst> where
T: CheckedCast<Dst>,
[src]
pub fn checked_as<Dst>(self) -> Option<Dst> where
T: CheckedCast<Dst>,
[src]Casts the value.
impl<Src, Dst> LosslessTryInto<Dst> for Src where
Dst: LosslessTryFrom<Src>,
[src]
impl<Src, Dst> LosslessTryInto<Dst> for Src where
Dst: LosslessTryFrom<Src>,
[src]pub fn lossless_try_into(self) -> Option<Dst>
[src]
pub fn lossless_try_into(self) -> Option<Dst>
[src]Performs the conversion.
impl<Src, Dst> LossyInto<Dst> for Src where
Dst: LossyFrom<Src>,
[src]
impl<Src, Dst> LossyInto<Dst> for Src where
Dst: LossyFrom<Src>,
[src]pub fn lossy_into(self) -> Dst
[src]
pub fn lossy_into(self) -> Dst
[src]Performs the conversion.
impl<T> OverflowingAs for T
[src]
impl<T> OverflowingAs for T
[src]pub fn overflowing_as<Dst>(self) -> (Dst, bool) where
T: OverflowingCast<Dst>,
[src]
pub fn overflowing_as<Dst>(self) -> (Dst, bool) where
T: OverflowingCast<Dst>,
[src]Casts the value.
impl<T> Same<T> for T
impl<T> Same<T> for T
type Output = T
type Output = T
Should always be Self
impl<T> SaturatingAs for T
[src]
impl<T> SaturatingAs for T
[src]pub fn saturating_as<Dst>(self) -> Dst where
T: SaturatingCast<Dst>,
[src]
pub fn saturating_as<Dst>(self) -> Dst where
T: SaturatingCast<Dst>,
[src]Casts the value.
impl<T> UnwrappedAs for T
[src]
impl<T> UnwrappedAs for T
[src]pub fn unwrapped_as<Dst>(self) -> Dst where
T: UnwrappedCast<Dst>,
[src]
pub fn unwrapped_as<Dst>(self) -> Dst where
T: UnwrappedCast<Dst>,
[src]Casts the value.
impl<T> WrappingAs for T
[src]
impl<T> WrappingAs for T
[src]pub fn wrapping_as<Dst>(self) -> Dst where
T: WrappingCast<Dst>,
[src]
pub fn wrapping_as<Dst>(self) -> Dst where
T: WrappingCast<Dst>,
[src]Casts the value.