Struct microbit::hal::pac::pwm0::RegisterBlock[]

#[repr(C)]
pub struct RegisterBlock {
Show fields pub tasks_stop: Reg<u32, _TASKS_STOP>, pub tasks_seqstart: [Reg<u32, _TASKS_SEQSTART>; 2], pub tasks_nextstep: Reg<u32, _TASKS_NEXTSTEP>, pub events_stopped: Reg<u32, _EVENTS_STOPPED>, pub events_seqstarted: [Reg<u32, _EVENTS_SEQSTARTED>; 2], pub events_seqend: [Reg<u32, _EVENTS_SEQEND>; 2], pub events_pwmperiodend: Reg<u32, _EVENTS_PWMPERIODEND>, pub events_loopsdone: Reg<u32, _EVENTS_LOOPSDONE>, pub shorts: Reg<u32, _SHORTS>, pub inten: Reg<u32, _INTEN>, pub intenset: Reg<u32, _INTENSET>, pub intenclr: Reg<u32, _INTENCLR>, pub enable: Reg<u32, _ENABLE>, pub mode: Reg<u32, _MODE>, pub countertop: Reg<u32, _COUNTERTOP>, pub prescaler: Reg<u32, _PRESCALER>, pub decoder: Reg<u32, _DECODER>, pub loop_: Reg<u32, _LOOP>, pub seq0: SEQ, pub seq1: SEQ, pub psel: PSEL, // some fields omitted
}
Expand description

Register block

Fields

tasks_stop: Reg<u32, _TASKS_STOP>

0x04 - Stops PWM pulse generation on all channels at the end of current PWM period, and stops sequence playback

tasks_seqstart: [Reg<u32, _TASKS_SEQSTART>; 2]

0x08 - Description collection: Loads the first PWM value on all enabled channels from sequence n, and starts playing that sequence at the rate defined in SEQ[n]REFRESH and/or DECODER.MODE. Causes PWM generation to start if not running.

tasks_nextstep: Reg<u32, _TASKS_NEXTSTEP>

0x10 - Steps by one value in the current sequence on all enabled channels if DECODER.MODE=NextStep. Does not cause PWM generation to start if not running.

events_stopped: Reg<u32, _EVENTS_STOPPED>

0x104 - Response to STOP task, emitted when PWM pulses are no longer generated

events_seqstarted: [Reg<u32, _EVENTS_SEQSTARTED>; 2]

0x108 - Description collection: First PWM period started on sequence n

events_seqend: [Reg<u32, _EVENTS_SEQEND>; 2]

0x110 - Description collection: Emitted at end of every sequence n, when last value from RAM has been applied to wave counter

events_pwmperiodend: Reg<u32, _EVENTS_PWMPERIODEND>

0x118 - Emitted at the end of each PWM period

events_loopsdone: Reg<u32, _EVENTS_LOOPSDONE>

0x11c - Concatenated sequences have been played the amount of times defined in LOOP.CNT

shorts: Reg<u32, _SHORTS>

0x200 - Shortcuts between local events and tasks

inten: Reg<u32, _INTEN>

0x300 - Enable or disable interrupt

intenset: Reg<u32, _INTENSET>

0x304 - Enable interrupt

intenclr: Reg<u32, _INTENCLR>

0x308 - Disable interrupt

enable: Reg<u32, _ENABLE>

0x500 - PWM module enable register

mode: Reg<u32, _MODE>

0x504 - Selects operating mode of the wave counter

countertop: Reg<u32, _COUNTERTOP>

0x508 - Value up to which the pulse generator counter counts

prescaler: Reg<u32, _PRESCALER>

0x50c - Configuration for PWM_CLK

decoder: Reg<u32, _DECODER>

0x510 - Configuration of the decoder

loop_: Reg<u32, _LOOP>

0x514 - Number of playbacks of a loop

seq0: SEQ

0x520 - Unspecified

seq1: SEQ

0x540 - Unspecified

psel: PSEL

0x560 - Unspecified

Auto Trait Implementations

Blanket Implementations

impl<T> Any for T where
    T: 'static + ?Sized
[src]

pub fn type_id(&self) -> TypeId[src]

Gets the TypeId of self. Read more

impl<T> Az for T[src]

pub fn az<Dst>(self) -> Dst where
    T: Cast<Dst>, 
[src]

Casts the value.

impl<T> Borrow<T> for T where
    T: ?Sized
[src]

pub fn borrow(&self) -> &T[src]

Immutably borrows from an owned value. Read more

impl<T> BorrowMut<T> for T where
    T: ?Sized
[src]

pub fn borrow_mut(&mut self) -> &mut T[src]

Mutably borrows from an owned value. Read more

impl<T> CheckedAs for T[src]

pub fn checked_as<Dst>(self) -> Option<Dst> where
    T: CheckedCast<Dst>, 
[src]

Casts the value.

impl<T> From<T> for T[src]

pub fn from(t: T) -> T[src]

Performs the conversion.

impl<T, U> Into<U> for T where
    U: From<T>, 
[src]

pub fn into(self) -> U[src]

Performs the conversion.

impl<Src, Dst> LosslessTryInto<Dst> for Src where
    Dst: LosslessTryFrom<Src>, 
[src]

pub fn lossless_try_into(self) -> Option<Dst>[src]

Performs the conversion.

impl<Src, Dst> LossyInto<Dst> for Src where
    Dst: LossyFrom<Src>, 
[src]

pub fn lossy_into(self) -> Dst[src]

Performs the conversion.

impl<T> OverflowingAs for T[src]

pub fn overflowing_as<Dst>(self) -> (Dst, bool) where
    T: OverflowingCast<Dst>, 
[src]

Casts the value.

impl<T> Same<T> for T

type Output = T

Should always be Self

impl<T> SaturatingAs for T[src]

pub fn saturating_as<Dst>(self) -> Dst where
    T: SaturatingCast<Dst>, 
[src]

Casts the value.

impl<T, U> TryFrom<U> for T where
    U: Into<T>, 
[src]

type Error = Infallible

The type returned in the event of a conversion error.

pub fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>[src]

Performs the conversion.

impl<T, U> TryInto<U> for T where
    U: TryFrom<T>, 
[src]

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.

pub fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>[src]

Performs the conversion.

impl<T> UnwrappedAs for T[src]

pub fn unwrapped_as<Dst>(self) -> Dst where
    T: UnwrappedCast<Dst>, 
[src]

Casts the value.

impl<T> WrappingAs for T[src]

pub fn wrapping_as<Dst>(self) -> Dst where
    T: WrappingCast<Dst>, 
[src]

Casts the value.