Enum mcp9808::reg_conf::AlertStatus

pub enum AlertStatus {
    NotAsserted = 0,
    Asserted = 1,
}

Alert Output Status bit This bit can not be set to ‘1’ or cleared to ‘0’ in Shutdown mode. However, if the Alert output is configured as Interrupt mode, and if the host controller clears to ‘0’, the interrupt, using bit 5 while the device is in Shutdown mode, then this bit will also be cleared ‘0’.

Variants

NotAsserted = 0

Alert output is not asserted by the device (power-up default)

Asserted = 1

Alert output is asserted as a comparator/Interrupt or critical temperature output