Enum mavlink::development::MavStandardMode

pub enum MavStandardMode {
    MAV_STANDARD_MODE_NON_STANDARD = 0,
    MAV_STANDARD_MODE_POSITION_HOLD = 1,
    MAV_STANDARD_MODE_ORBIT = 2,
    MAV_STANDARD_MODE_CRUISE = 3,
    MAV_STANDARD_MODE_ALTITUDE_HOLD = 4,
    MAV_STANDARD_MODE_RETURN_HOME = 5,
    MAV_STANDARD_MODE_SAFE_RECOVERY = 6,
    MAV_STANDARD_MODE_MISSION = 7,
    MAV_STANDARD_MODE_LAND = 8,
    MAV_STANDARD_MODE_TAKEOFF = 9,
}

Standard modes with a well understood meaning across flight stacks and vehicle types. For example, most flight stack have the concept of a “return” or “RTL” mode that takes a vehicle to safety, even though the precise mechanics of this mode may differ. Modes may be set using MAV_CMD_DO_SET_STANDARD_MODE.

Variants

MAV_STANDARD_MODE_NON_STANDARD = 0

Non standard mode. This may be used when reporting the mode if the current flight mode is not a standard mode.

MAV_STANDARD_MODE_POSITION_HOLD = 1

Position mode (manual). Position-controlled and stabilized manual mode. When sticks are released vehicles return to their level-flight orientation and hold both position and altitude against wind and external forces. This mode can only be set by vehicles that can hold a fixed position. Multicopter (MC) vehicles actively brake and hold both position and altitude against wind and external forces. Hybrid MC/FW (“VTOL”) vehicles first transition to multicopter mode (if needed) but otherwise behave in the same way as MC vehicles. Fixed-wing (FW) vehicles must not support this mode. Other vehicle types must not support this mode (this may be revisited through the PR process).

MAV_STANDARD_MODE_ORBIT = 2

Orbit (manual). Position-controlled and stabilized manual mode. The vehicle circles around a fixed setpoint in the horizontal plane at a particular radius, altitude, and direction. Flight stacks may further allow manual control over the setpoint position, radius, direction, speed, and/or altitude of the circle, but this is not mandated. Flight stacks may support the MAV_CMD_DO_ORBIT for changing the orbit parameters. MC and FW vehicles may support this mode. Hybrid MC/FW (“VTOL”) vehicles may support this mode in MC/FW or both modes; if the mode is not supported by the current configuration the vehicle should transition to the supported configuration. Other vehicle types must not support this mode (this may be revisited through the PR process).

MAV_STANDARD_MODE_CRUISE = 3

Cruise mode (manual). Position-controlled and stabilized manual mode. When sticks are released vehicles return to their level-flight orientation and hold their original track against wind and external forces. Fixed-wing (FW) vehicles level orientation and maintain current track and altitude against wind and external forces. Hybrid MC/FW (“VTOL”) vehicles first transition to FW mode (if needed) but otherwise behave in the same way as MC vehicles. Multicopter (MC) vehicles must not support this mode. Other vehicle types must not support this mode (this may be revisited through the PR process).

MAV_STANDARD_MODE_ALTITUDE_HOLD = 4

Altitude hold (manual). Altitude-controlled and stabilized manual mode. When sticks are released vehicles return to their level-flight orientation and hold their altitude. MC vehicles continue with existing momentum and may move with wind (or other external forces). FW vehicles continue with current heading, but may be moved off-track by wind. Hybrid MC/FW (“VTOL”) vehicles behave according to their current configuration/mode (FW or MC). Other vehicle types must not support this mode (this may be revisited through the PR process).

MAV_STANDARD_MODE_RETURN_HOME = 5

Return home mode (auto). Automatic mode that returns vehicle to home via a safe flight path. It may also automatically land the vehicle (i.e. RTL). The precise flight path and landing behaviour depend on vehicle configuration and type.

MAV_STANDARD_MODE_SAFE_RECOVERY = 6

Safe recovery mode (auto). Automatic mode that takes vehicle to a predefined safe location via a safe flight path (rally point or mission defined landing) . It may also automatically land the vehicle. The precise return location, flight path, and landing behaviour depend on vehicle configuration and type.

MAV_STANDARD_MODE_MISSION = 7

Mission mode (automatic). Automatic mode that executes MAVLink missions. Missions are executed from the current waypoint as soon as the mode is enabled.

MAV_STANDARD_MODE_LAND = 8

Land mode (auto). Automatic mode that lands the vehicle at the current location. The precise landing behaviour depends on vehicle configuration and type.

MAV_STANDARD_MODE_TAKEOFF = 9

Takeoff mode (auto). Automatic takeoff mode. The precise takeoff behaviour depends on vehicle configuration and type.

Implementations

impl MavStandardMode

pub const DEFAULT: Self = Self::MAV_STANDARD_MODE_NON_STANDARD

Trait Implementations

impl Clone for MavStandardMode

fn clone(&self) -> MavStandardMode

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for MavStandardMode

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for MavStandardMode

fn default() -> Self

Returns the “default value” for a type.

impl<'de> Deserialize<'de> for MavStandardMode

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer.

impl FromPrimitive for MavStandardMode

fn from_i64(n: i64) -> Option<Self>

Converts an i64 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_u64(n: u64) -> Option<Self>

Converts an u64 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_isize(n: isize) -> Option<Self>

Converts an isize to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_i8(n: i8) -> Option<Self>

Converts an i8 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_i16(n: i16) -> Option<Self>

Converts an i16 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_i32(n: i32) -> Option<Self>

Converts an i32 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_i128(n: i128) -> Option<Self>

Converts an i128 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_usize(n: usize) -> Option<Self>

Converts a usize to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_u8(n: u8) -> Option<Self>

Converts an u8 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_u16(n: u16) -> Option<Self>

Converts an u16 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_u32(n: u32) -> Option<Self>

Converts an u32 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_u128(n: u128) -> Option<Self>

Converts an u128 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_f32(n: f32) -> Option<Self>

Converts a f32 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_f64(n: f64) -> Option<Self>

Converts a f64 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

impl PartialEq for MavStandardMode

fn eq(&self, other: &MavStandardMode) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Serialize for MavStandardMode

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error>where __S: Serializer,

Serialize this value into the given Serde serializer.

impl ToPrimitive for MavStandardMode

fn to_i64(&self) -> Option<i64>

Converts the value of self to an i64. If the value cannot be represented by an i64, then None is returned.

fn to_u64(&self) -> Option<u64>

Converts the value of self to a u64. If the value cannot be represented by a u64, then None is returned.

fn to_isize(&self) -> Option<isize>

Converts the value of self to an isize. If the value cannot be represented by an isize, then None is returned.

fn to_i8(&self) -> Option<i8>

Converts the value of self to an i8. If the value cannot be represented by an i8, then None is returned.

fn to_i16(&self) -> Option<i16>

Converts the value of self to an i16. If the value cannot be represented by an i16, then None is returned.

fn to_i32(&self) -> Option<i32>

Converts the value of self to an i32. If the value cannot be represented by an i32, then None is returned.

fn to_i128(&self) -> Option<i128>

Converts the value of self to an i128. If the value cannot be represented by an i128 (i64 under the default implementation), then None is returned.

fn to_usize(&self) -> Option<usize>

Converts the value of self to a usize. If the value cannot be represented by a usize, then None is returned.

fn to_u8(&self) -> Option<u8>

Converts the value of self to a u8. If the value cannot be represented by a u8, then None is returned.

fn to_u16(&self) -> Option<u16>

Converts the value of self to a u16. If the value cannot be represented by a u16, then None is returned.

fn to_u32(&self) -> Option<u32>

Converts the value of self to a u32. If the value cannot be represented by a u32, then None is returned.

fn to_u128(&self) -> Option<u128>

Converts the value of self to a u128. If the value cannot be represented by a u128 (u64 under the default implementation), then None is returned.

fn to_f32(&self) -> Option<f32>

Converts the value of self to an f32. Overflows may map to positive or negative inifinity, otherwise None is returned if the value cannot be represented by an f32.

fn to_f64(&self) -> Option<f64>

Converts the value of self to an f64. Overflows may map to positive or negative inifinity, otherwise None is returned if the value cannot be represented by an f64.

impl Copy for MavStandardMode

impl StructuralPartialEq for MavStandardMode