Struct lpc82x::i2c0::mstctl::W
[−]
[src]
pub struct W { /* fields omitted */ }
Value to write to the register
Methods
impl W
[src]
fn reset_value() -> W
[src]
Reset value of the register
unsafe fn bits(&mut self, bits: u32) -> &mut Self
[src]
Writes raw bits to the register
fn mstcontinue(&mut self) -> _MSTCONTINUEW
[src]
Bit 0 - Master Continue. This bit is write-only.
fn mststart(&mut self) -> _MSTSTARTW
[src]
Bit 1 - Master Start control. This bit is write-only.
fn mststop(&mut self) -> _MSTSTOPW
[src]
Bit 2 - Master Stop control. This bit is write-only.
fn mstdma(&mut self) -> _MSTDMAW
[src]
Bit 3 - Master DMA enable. Data operations of the I2C can be performed with DMA. Protocol type operations such as Start, address, Stop, and address match must always be done with software, typically via an interrupt. When a DMA data transfer is complete, MSTDMA must be cleared prior to beginning the next operation, typically a Start or Stop.This bit is read/write.