Struct lpc81x_pac::lpc812::usart0::intenset::R

pub struct R(_);

Register INTENSET reader

Implementations

impl R

pub fn rxrdyen(&self) -> RXRDYEN_R

Bit 0 - When 1, enables an interrupt when there is a received character available to be read from the RXDAT register.

pub fn txrdyen(&self) -> TXRDYEN_R

Bit 2 - When 1, enables an interrupt when the TXDAT register is available to take another character to transmit.

pub fn deltactsen(&self) -> DELTACTSEN_R

Bit 5 - When 1, enables an interrupt when there is a change in the state of the CTS input.

pub fn txdisen(&self) -> TXDISEN_R

Bit 6 - When 1, enables an interrupt when the transmitter is fully disabled as indicated by the TXDISINT flag in STAT. See description of the TXDISINT bit for details.

pub fn overrunen(&self) -> OVERRUNEN_R

Bit 8 - When 1, enables an interrupt when an overrun error occurred.

pub fn deltarxbrken(&self) -> DELTARXBRKEN_R

Bit 11 - When 1, enables an interrupt when a change of state has occurred in the detection of a received break condition (break condition asserted or deasserted).

pub fn starten(&self) -> STARTEN_R

Bit 12 - When 1, enables an interrupt when a received start bit has been detected.

pub fn framerren(&self) -> FRAMERREN_R

Bit 13 - When 1, enables an interrupt when a framing error has been detected.

pub fn parityerren(&self) -> PARITYERREN_R

Bit 14 - When 1, enables an interrupt when a parity error has been detected.

pub fn rxnoiseen(&self) -> RXNOISEEN_R

Bit 15 - When 1, enables an interrupt when noise is detected.

Methods from Deref<Target = R<INTENSET_SPEC>>

pub fn bits(&self) -> REG::Ux

Reads raw bits from register.

Trait Implementations

impl Deref for R

type Target = R<INTENSET_SPEC>

The resulting type after dereferencing.

fn deref(&self) -> &Self::Target

Dereferences the value.

impl From<R<INTENSET_SPEC>> for R

fn from(reader: R<INTENSET_SPEC>) -> Self

Converts to this type from the input type.