Struct lpc81x_pac::lpc812::swm0::pinenable0::R

pub struct R(_);

Register PINENABLE0 reader

Implementations

impl R

pub fn acmp_i1(&self) -> ACMP_I1_R

Bit 0 - Enables fixed-pin function. Writing a 1 deselects the function and any movable function can be assigned to this pin. By default the fixed–pin function is deselected and GPIO is assigned to this pin.

pub fn acmp_i2(&self) -> ACMP_I2_R

Bit 1 - Enables fixed-pin function. Writing a 1 deselects the function and any movable function can be assigned to this pin. By default the fixed-pin function is deselected and GPIO is assigned to this pin. Functions CLKIN and ACMP_I2 are connected to the same pin PIO0_1. To use ACMP_I2, disable the CLKIN function in bit 7 of this register and enable ACMP_I2.

pub fn swclk(&self) -> SWCLK_R

Bit 2 - Enables fixed-pin function. Writing a 1 deselects the function and any movable function can be assigned to this pin. This function is selected by default.

pub fn swdio(&self) -> SWDIO_R

Bit 3 - Enables fixed-pin function. Writing a 1 deselects the function and any movable function can be assigned to this pin. This function is selected by default.

pub fn xtalin(&self) -> XTALIN_R

Bit 4 - Enables fixed-pin function. Writing a 1 deselects the function and any movable function can be assigned to this pin. By default the fixed–pin function is deselected and GPIO is assigned to this pin.

pub fn xtalout(&self) -> XTALOUT_R

Bit 5 - Enables fixed-pin function. Writing a 1 deselects the function and any movable function can be assigned to this pin. By default the fixed–pin function is deselected and GPIO is assigned to this pin.

pub fn resetn(&self) -> RESETN_R

Bit 6 - Enables fixed-pin function. Writing a 1 deselects the function and any movable function can be assigned to this pin. This function is selected by default.

pub fn clkin(&self) -> CLKIN_R

Bit 7 - Enables fixed-pin function. Writing a 1 deselects the function and any movable function can be assigned to this pin. By default the fixed-pin function is deselected and GPIO is assigned to this pin. Functions CLKIN and ACMP_I2 are connected to the same pin PIO0_1. To use CLKIN, disable ACMP_I2 in bit 1 of this register and enable CLKIN.

pub fn vddcmp(&self) -> VDDCMP_R

Bit 8 - Enables fixed-pin function. Writing a 1 deselects the function and any movable function can be assigned to this pin. By default the fixed–pin function is deselected and GPIO is assigned to this pin.

Methods from Deref<Target = R<PINENABLE0_SPEC>>

pub fn bits(&self) -> REG::Ux

Reads raw bits from register.

Trait Implementations

impl Deref for R

type Target = R<PINENABLE0_SPEC>

The resulting type after dereferencing.

fn deref(&self) -> &Self::Target

Dereferences the value.

impl From<R<PINENABLE0_SPEC>> for R

fn from(reader: R<PINENABLE0_SPEC>) -> Self

Converts to this type from the input type.