Struct lpc81x_pac::lpc811::spi0::intenset::R

pub struct R(_);

Register INTENSET reader

Implementations

impl R

pub fn rxrdyen(&self) -> RXRDYEN_R

Bit 0 - Determines whether an interrupt occurs when receiver data is available.

pub fn txrdyen(&self) -> TXRDYEN_R

Bit 1 - Determines whether an interrupt occurs when the transmitter holding register is available.

pub fn rxoven(&self) -> RXOVEN_R

Bit 2 - Determines whether an interrupt occurs when a receiver overrun occurs. This happens in slave mode when there is a need for the receiver to move newly received data to the RXDAT register when it is already in use. The interface prevents receiver overrun in Master mode by not allowing a new transmission to begin when a receiver overrun would otherwise occur.

pub fn txuren(&self) -> TXUREN_R

Bit 3 - Determines whether an interrupt occurs when a transmitter underrun occurs. This happens in slave mode when there is a need to transmit data when none is available.

pub fn ssaen(&self) -> SSAEN_R

Bit 4 - Determines whether an interrupt occurs when the Slave Select is asserted.

pub fn ssden(&self) -> SSDEN_R

Bit 5 - Determines whether an interrupt occurs when the Slave Select is deasserted.

Methods from Deref<Target = R<INTENSET_SPEC>>

pub fn bits(&self) -> REG::Ux

Reads raw bits from register.

Trait Implementations

impl Deref for R

type Target = R<INTENSET_SPEC>

The resulting type after dereferencing.

fn deref(&self) -> &Self::Target

Dereferences the value.

impl From<R<INTENSET_SPEC>> for R

fn from(reader: R<INTENSET_SPEC>) -> Self

Converts to this type from the input type.