Struct lpc81x_pac::spi0::dly::W

pub struct W { /* fields omitted */ }

Value to write to the register

Methods

impl W

pub fn reset_value() -> W

Reset value of the register

pub unsafe fn bits(&mut self, bits: u32) -> &mut Self

Writes raw bits to the register

pub fn pre_delay(&mut self) -> _PRE_DELAYW

Bits 0:3 - Controls the amount of time between SSEL assertion and the beginning of a data frame. There is always one SPI clock time between SSEL assertion and the first clock edge. This is not considered part of the pre-delay. 0x0 = No additional time is inserted. 0x1 = 1 SPI clock time is inserted. 0x2 = 2 SPI clock times are inserted. ... 0xF = 15 SPI clock times are inserted.

pub fn post_delay(&mut self) -> _POST_DELAYW

Bits 4:7 - Controls the amount of time between the end of a data frame and SSEL deassertion. 0x0 = No additional time is inserted. 0x1 = 1 SPI clock time is inserted. 0x2 = 2 SPI clock times are inserted. ... 0xF = 15 SPI clock times are inserted.

pub fn frame_delay(&mut self) -> _FRAME_DELAYW

Bits 8:11 - Controls the minimum amount of time between adjacent data frames. 0x0 = No additional time is inserted. 0x1 = 1 SPI clock time is inserted. 0x2 = 2 SPI clock times are inserted. ... 0xF = 15 SPI clock times are inserted.

pub fn transfer_delay(&mut self) -> _TRANSFER_DELAYW

Bits 12:15 - Controls the minimum amount of time that the SSELs are deasserted between transfers. 0x0 = The minimum time that SSEL is deasserted is 1 SPI clock time. (Zero added time.) 0x1 = The minimum time that SSEL is deasserted is 2 SPI clock times. 0x2 = The minimum time that SSEL is deasserted is 3 SPI clock times. ... 0xF = The minimum time that SSEL is deasserted is 16 SPI clock times.