Struct lpc81x_pac::i2c::timeout::W

pub struct W { /* fields omitted */ }

Value to write to the register

Methods

impl W

pub fn reset_value() -> W

Reset value of the register

pub unsafe fn bits(&mut self, bits: u32) -> &mut Self

Writes raw bits to the register

pub fn tomin(&mut self) -> _TOMINW

Bits 0:3 - Timeout time value, bottom four bits. These are hard-wired to 0xF. This gives a minimum timeout of 16 I2C function clocks and also a timeout resolution of 16 I2C function clocks.

pub fn to(&mut self) -> _TOW

Bits 4:15 - Timeout time value. Specifies the timeout interval value in increments of 16 I2C function clocks, as defined by the CLKDIV register. To change this value while I2C is in operation, disable all time-outs, write a new value to TIMEOUT, then re-enable time-outs. 0x000 = A time-out will occur after 16 counts of the I2C function clock. 0x001 = A time-out will occur after 32 counts of the I2C function clock. ... 0xFFF = A timeout will occur after 65,536 counts of the I2C function clock.