1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
#[doc = "Reader of register FIFORDNOPOP"] pub type R = crate::R<u32, super::FIFORDNOPOP>; #[doc = "Reader of field `RXDATA`"] pub type RXDATA_R = crate::R<u16, u16>; #[doc = "Reader of field `FRAMERR`"] pub type FRAMERR_R = crate::R<bool, bool>; #[doc = "Reader of field `PARITYERR`"] pub type PARITYERR_R = crate::R<bool, bool>; #[doc = "Reader of field `RXNOISE`"] pub type RXNOISE_R = crate::R<bool, bool>; impl R { #[doc = "Bits 0:8 - Received data from the FIFO. The number of bits used depends on the DATALEN and PARITYSEL settings."] #[inline(always)] pub fn rxdata(&self) -> RXDATA_R { RXDATA_R::new((self.bits & 0x01ff) as u16) } #[doc = "Bit 13 - Framing Error status flag. This bit reflects the status for the data it is read along with from the FIFO, and indicates that the character was received with a missing stop bit at the expected location. This could be an indication of a baud rate or configuration mismatch with the transmitting source."] #[inline(always)] pub fn framerr(&self) -> FRAMERR_R { FRAMERR_R::new(((self.bits >> 13) & 0x01) != 0) } #[doc = "Bit 14 - Parity Error status flag. This bit reflects the status for the data it is read along with from the FIFO. This bit will be set when a parity error is detected in a received character."] #[inline(always)] pub fn parityerr(&self) -> PARITYERR_R { PARITYERR_R::new(((self.bits >> 14) & 0x01) != 0) } #[doc = "Bit 15 - Received Noise flag. See description of the RxNoiseInt bit in Table 354."] #[inline(always)] pub fn rxnoise(&self) -> RXNOISE_R { RXNOISE_R::new(((self.bits >> 15) & 0x01) != 0) } }