pub struct R(_);
Expand description
Register PLL_SIC_TOG
reader
Implementations
sourceimpl R
impl R
sourcepub fn pll_en_usb_clks(&self) -> PLL_EN_USB_CLKS_R
pub fn pll_en_usb_clks(&self) -> PLL_EN_USB_CLKS_R
Bit 6 - Enables the USB clock from PLL to USB PHY
sourcepub fn pll_power(&self) -> PLL_POWER_R
pub fn pll_power(&self) -> PLL_POWER_R
Bit 12 - Power up the USB PLL
sourcepub fn pll_enable(&self) -> PLL_ENABLE_R
pub fn pll_enable(&self) -> PLL_ENABLE_R
Bit 13 - Enables the clock output from the USB PLL
sourcepub fn refbias_pwd_sel(&self) -> REFBIAS_PWD_SEL_R
pub fn refbias_pwd_sel(&self) -> REFBIAS_PWD_SEL_R
Bit 19 - Reference bias power down select.
sourcepub fn refbias_pwd(&self) -> REFBIAS_PWD_R
pub fn refbias_pwd(&self) -> REFBIAS_PWD_R
Bit 20 - Power down the reference bias This bit is only used when REFBIAS_PWD_SEL is set to 1.
sourcepub fn pll_reg_enable(&self) -> PLL_REG_ENABLE_R
pub fn pll_reg_enable(&self) -> PLL_REG_ENABLE_R
Bit 21 - This field controls the USB PLL regulator, set to enable the regulator
sourcepub fn pll_div_sel(&self) -> PLL_DIV_SEL_R
pub fn pll_div_sel(&self) -> PLL_DIV_SEL_R
Bits 22:24 - This field controls the USB PLL feedback loop divider
sourcepub fn pll_prediv(&self) -> PLL_PREDIV_R
pub fn pll_prediv(&self) -> PLL_PREDIV_R
Bit 30 - This is selection between /1 or /2 to expand the range of ref input clock.
sourcepub fn pll_lock(&self) -> PLL_LOCK_R
pub fn pll_lock(&self) -> PLL_LOCK_R
Bit 31 - USB PLL lock status indicator
Methods from Deref<Target = R<PLL_SIC_TOG_SPEC>>
Trait Implementations
sourceimpl From<R<PLL_SIC_TOG_SPEC>> for R
impl From<R<PLL_SIC_TOG_SPEC>> for R
sourcefn from(reader: R<PLL_SIC_TOG_SPEC>) -> Self
fn from(reader: R<PLL_SIC_TOG_SPEC>) -> Self
Performs the conversion.
Auto Trait Implementations
Blanket Implementations
sourceimpl<T> BorrowMut<T> for T where
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
const: unstable · sourcefn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more