Module lpc55_pac::usbfsh::hccommandstatus
source · [−]Expand description
This register is used to receive the commands from the Host Controller Driver (HCD)
Structs
Field BLF
reader - BulkListFilled This bit is used to indicate whether there are any TDs on the Bulk list.
Field BLF
writer - BulkListFilled This bit is used to indicate whether there are any TDs on the Bulk list.
Field CLF
reader - ControlListFilled This bit is used to indicate whether there are any TDs on the Control list.
Field CLF
writer - ControlListFilled This bit is used to indicate whether there are any TDs on the Control list.
This register is used to receive the commands from the Host Controller Driver (HCD)
Field HCR
reader - HostControllerReset This bit is set by HCD to initiate a software reset of HC.
Field HCR
writer - HostControllerReset This bit is set by HCD to initiate a software reset of HC.
Field OCR
reader - OwnershipChangeRequest This bit is set by an OS HCD to request a change of control of the HC.
Field OCR
writer - OwnershipChangeRequest This bit is set by an OS HCD to request a change of control of the HC.
Register HCCOMMANDSTATUS
reader
Field SOC
reader - SchedulingOverrunCount These bits are incremented on each scheduling overrun error.
Field SOC
writer - SchedulingOverrunCount These bits are incremented on each scheduling overrun error.
Register HCCOMMANDSTATUS
writer