lpc55_pac/secgpio/
w0_18.rs

1#[doc = "Register `W0_18` reader"]
2pub struct R(crate::R<W0_18_SPEC>);
3impl core::ops::Deref for R {
4    type Target = crate::R<W0_18_SPEC>;
5    #[inline(always)]
6    fn deref(&self) -> &Self::Target {
7        &self.0
8    }
9}
10impl From<crate::R<W0_18_SPEC>> for R {
11    #[inline(always)]
12    fn from(reader: crate::R<W0_18_SPEC>) -> Self {
13        R(reader)
14    }
15}
16#[doc = "Register `W0_18` writer"]
17pub struct W(crate::W<W0_18_SPEC>);
18impl core::ops::Deref for W {
19    type Target = crate::W<W0_18_SPEC>;
20    #[inline(always)]
21    fn deref(&self) -> &Self::Target {
22        &self.0
23    }
24}
25impl core::ops::DerefMut for W {
26    #[inline(always)]
27    fn deref_mut(&mut self) -> &mut Self::Target {
28        &mut self.0
29    }
30}
31impl From<crate::W<W0_18_SPEC>> for W {
32    #[inline(always)]
33    fn from(writer: crate::W<W0_18_SPEC>) -> Self {
34        W(writer)
35    }
36}
37#[doc = "Field `PWORD` reader - Read 0: pin PIOm_n is LOW. Write 0: clear output bit. Read 0xFFFF FFFF: pin PIOm_n is HIGH. Write any value 0x0000 0001 to 0xFFFF FFFF: set output bit. Only 0 or 0xFFFF FFFF can be read. Writing any value other than 0 will set the output bit. One register for each port pin. Supported pins depends on the specific device and package."]
38pub struct PWORD_R(crate::FieldReader<u32, u32>);
39impl PWORD_R {
40    #[inline(always)]
41    pub(crate) fn new(bits: u32) -> Self {
42        PWORD_R(crate::FieldReader::new(bits))
43    }
44}
45impl core::ops::Deref for PWORD_R {
46    type Target = crate::FieldReader<u32, u32>;
47    #[inline(always)]
48    fn deref(&self) -> &Self::Target {
49        &self.0
50    }
51}
52#[doc = "Field `PWORD` writer - Read 0: pin PIOm_n is LOW. Write 0: clear output bit. Read 0xFFFF FFFF: pin PIOm_n is HIGH. Write any value 0x0000 0001 to 0xFFFF FFFF: set output bit. Only 0 or 0xFFFF FFFF can be read. Writing any value other than 0 will set the output bit. One register for each port pin. Supported pins depends on the specific device and package."]
53pub struct PWORD_W<'a> {
54    w: &'a mut W,
55}
56impl<'a> PWORD_W<'a> {
57    #[doc = r"Writes raw bits to the field"]
58    #[inline(always)]
59    pub unsafe fn bits(self, value: u32) -> &'a mut W {
60        self.w.bits = value as u32;
61        self.w
62    }
63}
64impl R {
65    #[doc = "Bits 0:31 - Read 0: pin PIOm_n is LOW. Write 0: clear output bit. Read 0xFFFF FFFF: pin PIOm_n is HIGH. Write any value 0x0000 0001 to 0xFFFF FFFF: set output bit. Only 0 or 0xFFFF FFFF can be read. Writing any value other than 0 will set the output bit. One register for each port pin. Supported pins depends on the specific device and package."]
66    #[inline(always)]
67    pub fn pword(&self) -> PWORD_R {
68        PWORD_R::new(self.bits as u32)
69    }
70}
71impl W {
72    #[doc = "Bits 0:31 - Read 0: pin PIOm_n is LOW. Write 0: clear output bit. Read 0xFFFF FFFF: pin PIOm_n is HIGH. Write any value 0x0000 0001 to 0xFFFF FFFF: set output bit. Only 0 or 0xFFFF FFFF can be read. Writing any value other than 0 will set the output bit. One register for each port pin. Supported pins depends on the specific device and package."]
73    #[inline(always)]
74    pub fn pword(&mut self) -> PWORD_W {
75        PWORD_W { w: self }
76    }
77    #[doc = "Writes raw bits to the register."]
78    #[inline(always)]
79    pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
80        self.0.bits(bits);
81        self
82    }
83}
84#[doc = "Word pin registers for all port GPIO pins\n\nThis register you can [`read`](crate::generic::Reg::read), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [w0_18](index.html) module"]
85pub struct W0_18_SPEC;
86impl crate::RegisterSpec for W0_18_SPEC {
87    type Ux = u32;
88}
89#[doc = "`read()` method returns [w0_18::R](R) reader structure"]
90impl crate::Readable for W0_18_SPEC {
91    type Reader = R;
92}
93#[doc = "`write(|w| ..)` method takes [w0_18::W](W) writer structure"]
94impl crate::Writable for W0_18_SPEC {
95    type Writer = W;
96}
97#[doc = "`reset()` method sets W0_18 to value 0"]
98impl crate::Resettable for W0_18_SPEC {
99    #[inline(always)]
100    fn reset_value() -> Self::Ux {
101        0
102    }
103}
lpc55_pac/secgpio/w0_18.rs

lpc55_pac/secgpio/
w0_18.rs
