Struct lpc55_pac::i2s0::cfg1::DATALEN_R [−][src]
pub struct DATALEN_R(_);
Field DATALEN reader - Data Length, minus 1 encoded, defines the number of data bits to be transmitted or received for all I2S channel pairs in this Flexcomm. Note that data is only driven to or received from SDA for the number of bits defined by DATALEN. DATALEN is also used in these ways by the I2S: Determines the size of data transfers between the FIFO and the I2S serializer/deserializer. See FIFO buffer configurations and usage In mode 1, 2, and 3, determines the location of right data following left data in the frame. In mode 3 (where WS has a one data slot long pulse at the beginning of each data frame) determines the duration of the WS pulse. Values: 0x00 to 0x02 = not supported 0x03 = data is 4 bits in length 0x04 = data is 5 bits in length 0x1F = data is 32 bits in length
Methods from Deref<Target = FieldReader<u8, u8>>
pub fn bit(&self) -> bool[src]
Value of the field as raw bits.
pub fn bit_is_clear(&self) -> bool[src]
Returns true if the bit is clear (0).
pub fn bit_is_set(&self) -> bool[src]
Returns true if the bit is set (1).