Struct lpc55_pac::i2c0::timeout::R

pub struct R(_);

Register TIMEOUT reader

Implementations

impl R

pub fn tomin(&self) -> TOMIN_R

Bits 0:3 - Time-out time value, bottom four bits. These are hard-wired to 0xF. This gives a minimum time-out of 16 I2C function clocks and also a time-out resolution of 16 I2C function clocks.

pub fn to(&self) -> TO_R

Bits 4:15 - Time-out time value. Specifies the time-out interval value in increments of 16 I 2C function clocks, as defined by the CLKDIV register. To change this value while I2C is in operation, disable all time-outs, write a new value to TIMEOUT, then re-enable time-outs. 0x000 = A time-out will occur after 16 counts of the I2C function clock. 0x001 = A time-out will occur after 32 counts of the I2C function clock. 0xFFF = A time-out will occur after 65,536 counts of the I2C function clock.

Methods from Deref<Target = R<TIMEOUT_SPEC>>

pub fn bits(&self) -> REG::Ux

Reads raw bits from register.

Trait Implementations

impl Deref for R

type Target = R<TIMEOUT_SPEC>

The resulting type after dereferencing.

fn deref(&self) -> &Self::Target

Dereferences the value.

impl From<R<TIMEOUT_SPEC>> for R

fn from(reader: R<TIMEOUT_SPEC>) -> Self

Performs the conversion.