Struct lpc176x_5x::syscon::usbclkcfg::W

pub struct W { /* fields omitted */ }

Value to write to the register

Methods

impl W

pub fn reset_value() -> W

Reset value of the register

pub unsafe fn bits(&mut self, bits: u32) -> &mut Self

Writes raw bits to the register

pub fn usbsel(&mut self) -> _USBSELW

Bits 0:3 - Selects the divide value for creating the USB clock from the PLL0 output. Only the values shown below can produce even number multiples of 48 MHz from the PLL0 output. Warning: Improper setting of this value will result in incorrect operation of the USB interface. 5 = PLL0 output is divided by 6. PLL0 output must be 288 MHz. 7 = PLL0 output is divided by 8. PLL0 output must be 384 MHz. 9 = PLL0 output is divided by 10. PLL0 output must be 480 MHz.