Struct lpc13xx::ct32b0::bemr::W
[−]
[src]
pub struct W { /* fields omitted */ }
Value to write to the register
Methods
impl W
[src]
pub fn reset_value() -> W
[src]
Reset value of the register
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self
[src]
Writes raw bits to the register
pub fn em0(&mut self) -> _EM0W
[src]
Bit 0 - External Match 0. This bit reflects the state of output CT32Bn_MAT0, whether or not this output is connected to its pin. When a match occurs between the TC and MR0, this bit can either toggle, go LOW, go HIGH, or do nothing. Bits EMR[5:4] control the functionality of this output. This bit is driven to the CT32B0_MAT0/CT16B1_MAT0 pins if the match function is selected in the IOCON registers (0 = LOW, 1 = HIGH).
pub fn em1(&mut self) -> _EM1W
[src]
Bit 1 - External Match 1. This bit reflects the state of output CT32Bn_MAT1, whether or not this output is connected to its pin. When a match occurs between the TC and MR1, this bit can either toggle, go LOW, go HIGH, or do nothing. Bits EMR[7:6] control the functionality of this output. This bit is driven to the CT32B0_MAT1/CT16B1_MAT1 pins if the match function is selected in the IOCON registers (0 = LOW, 1 = HIGH).
pub fn em2(&mut self) -> _EM2W
[src]
Bit 2 - External Match 2. This bit reflects the state of output CT32Bn_MAT2, whether or not this output is connected to its pin. When a match occurs between the TC and MR2, this bit can either toggle, go LOW, go HIGH, or do nothing. Bits EMR[9:8] control the functionality of this output. This bit is driven to the CT32B0_MAT2/CT16B1_MAT2 pins if the match function is selected in the IOCON registers (0 = LOW, 1 = HIGH).
pub fn em3(&mut self) -> _EM3W
[src]
Bit 3 - External Match 3. This bit reflects the state of output CT32Bn_MAT3, whether or not this output is connected to its pin. When a match occurs between the TC and MR3, this bit can either toggle, go LOW, go HIGH, or do nothing. Bits EMR[11:10] control the functionality of this output. This bit is driven to the CT32B0_MAT3/CT16B1_MAT3 pins if the match function is selected in the IOCON registers (0 = LOW, 1 = HIGH).
pub fn emc0(&mut self) -> _EMC0W
[src]
Bits 4:5 - External Match Control 0. Determines the functionality of External Match 0.
pub fn emc1(&mut self) -> _EMC1W
[src]
Bits 6:7 - External Match Control 1. Determines the functionality of External Match 1.
pub fn emc2(&mut self) -> _EMC2W
[src]
Bits 8:9 - External Match Control 2. Determines the functionality of External Match 2.
pub fn emc3(&mut self) -> _EMC3W
[src]
Bits 10:11 - External Match Control 3. Determines the functionality of External Match 3.