kcl_lib/std/

patterns.rs

//! Standard library patterns.

use std::cmp::Ordering;

use anyhow::Result;
use kcmc::ModelingCmd;
use kcmc::each_cmd as mcmd;
use kcmc::length_unit::LengthUnit;
use kcmc::ok_response::OkModelingCmdResponse;
use kcmc::shared::Transform;
use kcmc::websocket::OkWebSocketResponseData;
use kittycad_modeling_cmds::shared::Angle;
use kittycad_modeling_cmds::shared::OriginType;
use kittycad_modeling_cmds::shared::Rotation;
use kittycad_modeling_cmds::{self as kcmc};
use serde::Serialize;
use uuid::Uuid;

use super::axis_or_reference::Axis3dOrPoint3d;
use crate::CompilationIssue;
use crate::ExecutorContext;
use crate::KclVersion;
use crate::NodePath;
use crate::SourceRange;
use crate::errors::KclError;
use crate::errors::KclErrorDetails;
use crate::errors::Severity;
use crate::errors::Tag;
use crate::execution::ArtifactId;
use crate::execution::EarlyReturn;
use crate::execution::ExecState;
use crate::execution::Geometries;
use crate::execution::Geometry;
use crate::execution::ImportedGeometry;
use crate::execution::KclObjectFields;
use crate::execution::KclValue;
use crate::execution::KclValueControlFlow;
use crate::execution::ModelingCmdMeta;
use crate::execution::Sketch;
use crate::execution::Solid;
use crate::execution::SolidOrImportedGeometry;
use crate::execution::annotations;
use crate::execution::early_return;
use crate::execution::fn_call::Arg;
use crate::execution::fn_call::Args;
use crate::execution::kcl_value::FunctionSource;
use crate::execution::types::CoercionMode;
use crate::execution::types::NumericType;
use crate::execution::types::NumericTypeExt;
use crate::execution::types::PrimitiveType;
use crate::execution::types::RuntimeType;
use crate::std::args::TyF64;
use crate::std::axis_or_reference::Axis2dOrPoint2d;
use crate::std::shapes::POINT_ZERO_ZERO;
use crate::std::utils::point_3d_to_mm;
use crate::std::utils::point_to_mm;
pub const POINT_ZERO_ZERO_ZERO: [TyF64; 3] = [
    TyF64::new(
        0.0,
        crate::exec::NumericType::Known(crate::exec::UnitType::Length(crate::exec::UnitLength::Millimeters)),
    ),
    TyF64::new(
        0.0,
        crate::exec::NumericType::Known(crate::exec::UnitType::Length(crate::exec::UnitLength::Millimeters)),
    ),
    TyF64::new(
        0.0,
        crate::exec::NumericType::Known(crate::exec::UnitType::Length(crate::exec::UnitLength::Millimeters)),
    ),
];

const MUST_HAVE_ONE_INSTANCE: &str = "There must be at least 1 instance of your geometry";
const PATTERN_LINEAR_2D_REGIONS_ONLY: &str = "patternLinear2d should only be used with regions";

/// Something that can be 3D patterned, e.g. a 3D body.
#[derive(Debug)]
pub(crate) enum Patternable3d {
    Solids(Vec<Solid>),
    ImportedGeometry(ImportedGeometry),
}

/// Runtime type of [`Patternable3d`], i.e. something that can be replicated
/// in a 3D pattern.
fn pattern_geometry_3d_type() -> RuntimeType {
    RuntimeType::Union(vec![RuntimeType::solids(), RuntimeType::imported()])
}

/// Repeat some 3D geometry, changing each repetition slightly.
pub async fn pattern_transform(exec_state: &mut ExecState, args: Args) -> Result<KclValueControlFlow, KclError> {
    let (geometry, instances, transform, use_original) = pattern_transform_parse_args(&args, exec_state)?;

    match inner_pattern_transform(geometry, instances, transform, use_original, exec_state, &args).await {
        Ok(geometry) => Ok(KclValue::normal(geometry)),
        // The callback exited, e.g. by calling exit(). Propagate the exit so
        // that it terminates the enclosing module.
        Err(EarlyReturn::Value(cf)) => Ok(cf),
        Err(EarlyReturn::Error(err)) => Err(err),
    }
}

/// Repeat some 2D sketch, changing each repetition slightly.
pub async fn pattern_transform_2d(exec_state: &mut ExecState, args: Args) -> Result<KclValueControlFlow, KclError> {
    let (sketches, instances, transform, use_original) = pattern_transform_2d_parse_args(&args, exec_state)?;

    match inner_pattern_transform_2d(sketches, instances, transform, use_original, exec_state, &args).await {
        Ok(sketches) => Ok(KclValue::normal(sketches.into())),
        // The callback exited, e.g. by calling exit(). Propagate the exit so
        // that it terminates the enclosing module.
        Err(EarlyReturn::Value(cf)) => Ok(cf),
        Err(EarlyReturn::Error(err)) => Err(err),
    }
}

/// Parse patternTransform's arguments.
pub(crate) fn pattern_transform_parse_args(
    args: &Args,
    exec_state: &mut ExecState,
) -> Result<(Patternable3d, u32, FunctionSource, Option<bool>), KclError> {
    let geometry: SolidOrImportedGeometry =
        args.get_unlabeled_kw_arg("solids", &pattern_geometry_3d_type(), exec_state)?;
    let geometry = match geometry {
        SolidOrImportedGeometry::SolidSet(solids) => Patternable3d::Solids(solids),
        SolidOrImportedGeometry::ImportedGeometry(geometry) => Patternable3d::ImportedGeometry(*geometry),
    };
    let instances: u32 = args.get_kw_arg("instances", &RuntimeType::count(), exec_state)?;
    let transform: FunctionSource = args.get_kw_arg("transform", &RuntimeType::function(), exec_state)?;
    let use_original = args.get_kw_arg_opt("useOriginal", &RuntimeType::bool(), exec_state)?;
    Ok((geometry, instances, transform, use_original))
}

/// Parse patternTransform2d's arguments.
pub(crate) fn pattern_transform_2d_parse_args(
    args: &Args,
    exec_state: &mut ExecState,
) -> Result<(Vec<Sketch>, u32, FunctionSource, Option<bool>), KclError> {
    let sketches = args.get_unlabeled_kw_arg("sketches", &RuntimeType::sketches(), exec_state)?;
    let instances: u32 = args.get_kw_arg("instances", &RuntimeType::count(), exec_state)?;
    let transform: FunctionSource = args.get_kw_arg("transform", &RuntimeType::function(), exec_state)?;
    let use_original = args.get_kw_arg_opt("useOriginal", &RuntimeType::bool(), exec_state)?;
    Ok((sketches, instances, transform, use_original))
}

/// Check for at least one instance before the callback loop.
pub(crate) fn pattern_check_instances(instances: u32, source_range: SourceRange) -> Result<(), KclError> {
    if instances < 1 {
        return Err(KclError::new_semantic(KclErrorDetails::new(
            MUST_HAVE_ONE_INSTANCE.to_owned(),
            vec![source_range],
        )));
    }
    Ok(())
}

/// Build the per-repetition callback arguments for patternTransform.
pub(crate) fn transform_callback_args(
    i: u32,
    source_range: SourceRange,
    node_path: Option<NodePath>,
    exec_state: &mut ExecState,
    ctxt: &ExecutorContext,
) -> Args<crate::execution::fn_call::Sugary> {
    let repetition_num = KclValue::Number {
        value: i.into(),
        ty: NumericType::count(),
        meta: vec![source_range.into()],
    };
    Args::new(
        Default::default(),
        vec![(None, Arg::new(repetition_num, source_range))],
        source_range,
        node_path,
        exec_state,
        ctxt.clone(),
        Some("transform closure".to_owned()),
    )
}

/// Error when a transform callback produces no value.
pub(crate) fn transform_missing_value_error(source_range: SourceRange) -> KclError {
    KclError::new_semantic(KclErrorDetails::new(
        "Transform function must return a value".to_string(),
        vec![source_range],
    ))
}

/// Unpack a transform callback's returned value into engine transforms: the
/// evaluation-free tail of make_transform.
pub(crate) fn transforms_from_callback_value<T: GeometryTrait>(
    transform_fn_return: KclValue,
    source_range: SourceRange,
    exec_state: &mut ExecState,
) -> Result<Vec<Transform>, KclError> {
    let source_ranges = vec![source_range];
    let transforms = match transform_fn_return {
        KclValue::Object { value, .. } => vec![value],
        KclValue::Tuple { value, .. } | KclValue::HomArray { value, .. } => {
            let transforms: Vec<_> = value
                .into_iter()
                .map(|val| {
                    val.into_object().ok_or(KclError::new_semantic(KclErrorDetails::new(
                        "Transform function must return a transform object".to_string(),
                        source_ranges.clone(),
                    )))
                })
                .collect::<Result<_, KclError>>()?;
            transforms
        }
        _ => {
            return Err(KclError::new_semantic(KclErrorDetails::new(
                "Transform function must return a transform object".to_string(),
                source_ranges,
            )));
        }
    };

    let transforms = transforms
        .into_iter()
        .map(|obj| transform_from_obj_fields::<T>(obj, source_ranges.clone(), exec_state))
        .collect::<Result<_, KclError>>()?;
    Ok(transforms)
}

async fn inner_pattern_transform(
    geometry: Patternable3d,
    instances: u32,
    transform: FunctionSource,
    use_original: Option<bool>,
    exec_state: &mut ExecState,
    args: &Args,
) -> Result<KclValue, EarlyReturn> {
    // Build the vec of transforms, one for each repetition.
    let mut transform_vec = Vec::with_capacity(usize::try_from(instances).unwrap());
    pattern_check_instances(instances, args.source_range)?;
    for i in 1..instances {
        let t = match &geometry {
            Patternable3d::Solids(_) => {
                make_transform::<Solid>(
                    i,
                    &transform,
                    args.source_range,
                    args.node_path.clone(),
                    exec_state,
                    &args.ctx,
                )
                .await?
            }
            Patternable3d::ImportedGeometry(_) => {
                make_transform::<ImportedGeometry>(
                    i,
                    &transform,
                    args.source_range,
                    args.node_path.clone(),
                    exec_state,
                    &args.ctx,
                )
                .await?
            }
        };
        transform_vec.push(t);
    }
    match geometry {
        Patternable3d::Solids(solids) => Ok(execute_pattern_transform::<Solid>(
            transform_vec,
            solids,
            use_original.unwrap_or_default(),
            exec_state,
            args,
        )
        .await?
        .into()),
        Patternable3d::ImportedGeometry(geometry) => Ok(KclValue::from_imported_geometries(
            execute_pattern_transform(
                transform_vec,
                vec![geometry],
                use_original.unwrap_or_default(),
                exec_state,
                args,
            )
            .await?,
        )),
    }
}

async fn inner_pattern_transform_2d(
    sketches: Vec<Sketch>,
    instances: u32,
    transform: FunctionSource,
    use_original: Option<bool>,
    exec_state: &mut ExecState,
    args: &Args,
) -> Result<Vec<Sketch>, EarlyReturn> {
    // Build the vec of transforms, one for each repetition.
    let mut transform_vec = Vec::with_capacity(usize::try_from(instances).unwrap());
    pattern_check_instances(instances, args.source_range)?;
    for i in 1..instances {
        let t = make_transform::<Sketch>(
            i,
            &transform,
            args.source_range,
            args.node_path.clone(),
            exec_state,
            &args.ctx,
        )
        .await?;
        transform_vec.push(t);
    }
    Ok(execute_pattern_transform(
        transform_vec,
        sketches,
        use_original.unwrap_or_default(),
        exec_state,
        args,
    )
    .await?)
}

pub(crate) async fn execute_pattern_transform<T: GeometryTrait>(
    transforms: Vec<Vec<Transform>>,
    geo_set: T::Set,
    use_original: bool,
    exec_state: &mut ExecState,
    args: &Args,
) -> Result<Vec<T>, KclError> {
    // Flush the batch for our fillets/chamfers if there are any.
    // If we do not flush these, then you won't be able to pattern something with fillets.
    // Flush just the fillets/chamfers that apply to these solids.
    T::flush_batch(args, exec_state, &geo_set).await?;
    let starting: Vec<T> = geo_set.into();

    let mut output = Vec::new();
    for mut geo in starting {
        let new = send_pattern_transform(transforms.clone(), &mut geo, use_original, exec_state, args).await?;
        output.extend(new)
    }
    Ok(output)
}

async fn send_pattern_transform<T: GeometryTrait>(
    // This should be passed via reference, see
    // https://github.com/KittyCAD/modeling-app/issues/2821
    transforms: Vec<Vec<Transform>>,
    geometry: &mut T,
    use_original: bool,
    exec_state: &mut ExecState,
    args: &Args,
) -> Result<Vec<T>, KclError> {
    let extra_instances = transforms.len();
    let geometry_id = geometry.id(&args.ctx).await?;
    let entity_id = if use_original {
        geometry.topology_id()
    } else {
        geometry_id
    };

    let resp = exec_state
        .send_modeling_cmd(
            ModelingCmdMeta::from_args(exec_state, args),
            ModelingCmd::from(
                mcmd::EntityLinearPatternTransform::builder()
                    .entity_id(entity_id)
                    .transform(Default::default())
                    .transforms(transforms)
                    .build(),
            ),
        )
        .await?;

    let mut mock_ids = Vec::new();
    let entity_ids = if let OkWebSocketResponseData::Modeling {
        modeling_response: OkModelingCmdResponse::EntityLinearPatternTransform(pattern_info),
    } = &resp
    {
        &pattern_info.entity_face_edge_ids.iter().map(|x| x.object_id).collect()
    } else if args.ctx.no_engine_commands().await {
        mock_ids.reserve(extra_instances);
        for _ in 0..extra_instances {
            mock_ids.push(exec_state.next_uuid());
        }
        &mock_ids
    } else {
        return Err(KclError::new_engine(KclErrorDetails::new(
            format!("EntityLinearPattern response was not as expected: {resp:?}"),
            vec![args.source_range],
        )));
    };

    let mut geometries = vec![geometry.clone()];
    for id in entity_ids.iter().copied() {
        let mut new_geometry = geometry.clone();
        new_geometry.set_id(id);
        new_geometry.set_artifact_id(id);
        geometries.push(new_geometry);
    }
    Ok(geometries)
}

async fn make_transform<T: GeometryTrait>(
    i: u32,
    transform: &FunctionSource,
    source_range: SourceRange,
    node_path: Option<NodePath>,
    exec_state: &mut ExecState,
    ctxt: &ExecutorContext,
) -> Result<Vec<Transform>, EarlyReturn> {
    // Call the transform fn for this repetition.
    let transform_fn_args = transform_callback_args(i, source_range, node_path, exec_state, ctxt);
    let transform_fn_return = transform
        .call_kw(None, exec_state, ctxt, transform_fn_args, source_range)
        .await?;

    // Unpack the returned transform object.
    let transform_fn_return = transform_fn_return.ok_or_else(|| transform_missing_value_error(source_range))?;

    // If the callback exited, e.g. by calling exit(), skip building the
    // pattern, and propagate the exit so that it terminates the enclosing
    // module.
    let transform_fn_return = early_return!(transform_fn_return);

    Ok(transforms_from_callback_value::<T>(
        transform_fn_return,
        source_range,
        exec_state,
    )?)
}

fn transform_from_obj_fields<T: GeometryTrait>(
    transform: KclObjectFields,
    source_ranges: Vec<SourceRange>,
    exec_state: &mut ExecState,
) -> Result<Transform, KclError> {
    // Apply defaults to the transform.
    let replicate = match transform.get("replicate") {
        Some(KclValue::Bool { value: true, .. }) => true,
        Some(KclValue::Bool { value: false, .. }) => false,
        Some(_) => {
            return Err(KclError::new_semantic(KclErrorDetails::new(
                "The 'replicate' key must be a bool".to_string(),
                source_ranges,
            )));
        }
        None => true,
    };

    let scale = match transform.get("scale") {
        Some(x) => point_3d_to_mm(T::array_to_point3d(x, source_ranges.clone(), exec_state)?).into(),
        None => kcmc::shared::Point3d { x: 1.0, y: 1.0, z: 1.0 },
    };

    for (dim, name) in [(scale.x, "x"), (scale.y, "y"), (scale.z, "z")] {
        if dim == 0.0 {
            return Err(KclError::new_semantic(KclErrorDetails::new(
                format!("cannot set {name} = 0, scale factor must be nonzero"),
                source_ranges,
            )));
        }
    }
    let translate = match transform.get("translate") {
        Some(x) => {
            let arr = point_3d_to_mm(T::array_to_point3d(x, source_ranges.clone(), exec_state)?);
            kcmc::shared::Point3d::<LengthUnit> {
                x: LengthUnit(arr[0]),
                y: LengthUnit(arr[1]),
                z: LengthUnit(arr[2]),
            }
        }
        None => kcmc::shared::Point3d::<LengthUnit> {
            x: LengthUnit(0.0),
            y: LengthUnit(0.0),
            z: LengthUnit(0.0),
        },
    };

    let mut rotation = Rotation::default();
    if let Some(rot) = transform.get("rotation") {
        let KclValue::Object { value: rot, .. } = rot else {
            return Err(KclError::new_semantic(KclErrorDetails::new(
                "The 'rotation' key must be an object (with optional fields 'angle', 'axis' and 'origin')".to_owned(),
                source_ranges,
            )));
        };
        if let Some(axis) = rot.get("axis") {
            rotation.axis = point_3d_to_mm(T::array_to_point3d(axis, source_ranges.clone(), exec_state)?).into();
        }
        if let Some(angle) = rot.get("angle") {
            match angle {
                KclValue::Number { value: number, .. } => {
                    rotation.angle = Angle::from_degrees(*number);
                }
                _ => {
                    return Err(KclError::new_semantic(KclErrorDetails::new(
                        "The 'rotation.angle' key must be a number (of degrees)".to_owned(),
                        source_ranges,
                    )));
                }
            }
        }
        if let Some(origin) = rot.get("origin") {
            rotation.origin = match origin {
                KclValue::String { value: s, meta: _ } if s == "local" => OriginType::Local,
                KclValue::String { value: s, meta: _ } if s == "global" => OriginType::Global,
                other => {
                    let origin = point_3d_to_mm(T::array_to_point3d(other, source_ranges, exec_state)?).into();
                    OriginType::Custom { origin }
                }
            };
        }
    }

    let transform = Transform::builder()
        .replicate(replicate)
        .scale(scale)
        .translate(translate)
        .rotation(rotation)
        .build();
    Ok(transform)
}

fn array_to_point3d(
    val: &KclValue,
    source_ranges: Vec<SourceRange>,
    exec_state: &mut ExecState,
) -> Result<[TyF64; 3], KclError> {
    val.coerce(&RuntimeType::point3d(), CoercionMode::implicit(), exec_state)
        .map_err(|e| {
            KclError::new_semantic(KclErrorDetails::new(
                format!(
                    "Expected an array of 3 numbers (i.e., a 3D point), found {}",
                    e.found
                        .map(|t| t.human_friendly_type())
                        .unwrap_or_else(|| val.human_friendly_type())
                ),
                source_ranges,
            ))
        })
        .map(|val| val.as_point3d().unwrap())
}

fn array_to_point2d(
    val: &KclValue,
    source_ranges: Vec<SourceRange>,
    exec_state: &mut ExecState,
) -> Result<[TyF64; 2], KclError> {
    val.coerce(&RuntimeType::point2d(), CoercionMode::implicit(), exec_state)
        .map_err(|e| {
            KclError::new_semantic(KclErrorDetails::new(
                format!(
                    "Expected an array of 2 numbers (i.e., a 2D point), found {}",
                    e.found
                        .map(|t| t.human_friendly_type())
                        .unwrap_or_else(|| val.human_friendly_type())
                ),
                source_ranges,
            ))
        })
        .map(|val| val.as_point2d().unwrap())
}

pub trait GeometryTrait: Clone {
    type Set: Into<Vec<Self>> + Clone;
    #[allow(async_fn_in_trait)]
    async fn id(&mut self, ctx: &ExecutorContext) -> Result<Uuid, KclError>;
    fn topology_id(&self) -> Uuid;
    fn set_id(&mut self, id: Uuid);
    fn set_artifact_id(&mut self, id: Uuid);
    fn array_to_point3d(
        val: &KclValue,
        source_ranges: Vec<SourceRange>,
        exec_state: &mut ExecState,
    ) -> Result<[TyF64; 3], KclError>;
    #[allow(async_fn_in_trait)]
    async fn flush_batch(args: &Args, exec_state: &mut ExecState, set: &Self::Set) -> Result<(), KclError>;
}

impl GeometryTrait for Sketch {
    type Set = Vec<Sketch>;
    fn set_id(&mut self, id: Uuid) {
        self.id = id;
    }
    fn set_artifact_id(&mut self, id: Uuid) {
        self.artifact_id = ArtifactId::new(id);
    }
    async fn id(&mut self, _: &ExecutorContext) -> Result<Uuid, KclError> {
        Ok(self.id)
    }
    fn topology_id(&self) -> Uuid {
        self.original_id
    }
    fn array_to_point3d(
        val: &KclValue,
        source_ranges: Vec<SourceRange>,
        exec_state: &mut ExecState,
    ) -> Result<[TyF64; 3], KclError> {
        let [x, y] = array_to_point2d(val, source_ranges, exec_state)?;
        let ty = x.ty;
        Ok([x, y, TyF64::new(0.0, ty)])
    }

    async fn flush_batch(_: &Args, _: &mut ExecState, _: &Self::Set) -> Result<(), KclError> {
        Ok(())
    }
}

impl GeometryTrait for Solid {
    type Set = Vec<Solid>;
    fn set_id(&mut self, id: Uuid) {
        self.id = id;
        self.value_id = id;
        // We need this for in extrude.rs when you sketch on face.
        if let Some(sketch) = self.sketch_mut() {
            sketch.id = id;
        }
    }

    fn set_artifact_id(&mut self, id: Uuid) {
        self.become_pattern_copy(id);
    }

    async fn id(&mut self, _: &ExecutorContext) -> Result<Uuid, KclError> {
        Ok(self.id)
    }

    fn topology_id(&self) -> Uuid {
        Solid::topology_id(self)
    }

    fn array_to_point3d(
        val: &KclValue,
        source_ranges: Vec<SourceRange>,
        exec_state: &mut ExecState,
    ) -> Result<[TyF64; 3], KclError> {
        array_to_point3d(val, source_ranges, exec_state)
    }

    async fn flush_batch(args: &Args, exec_state: &mut ExecState, solid_set: &Self::Set) -> Result<(), KclError> {
        exec_state
            .flush_batch_for_solids(ModelingCmdMeta::from_args(exec_state, args), solid_set)
            .await
    }
}

impl GeometryTrait for ImportedGeometry {
    type Set = Vec<ImportedGeometry>;

    async fn id(&mut self, ctx: &ExecutorContext) -> Result<Uuid, KclError> {
        ImportedGeometry::id(self, ctx).await
    }

    fn topology_id(&self) -> Uuid {
        self.id
    }

    fn set_id(&mut self, id: Uuid) {
        self.id = id;
    }

    fn set_artifact_id(&mut self, _: Uuid) {}

    fn array_to_point3d(
        val: &KclValue,
        source_ranges: Vec<SourceRange>,
        exec_state: &mut ExecState,
    ) -> Result<[TyF64; 3], KclError> {
        array_to_point3d(val, source_ranges, exec_state)
    }

    async fn flush_batch(_: &Args, _: &mut ExecState, _: &Self::Set) -> Result<(), KclError> {
        Ok(())
    }
}

#[cfg(test)]
mod tests {
    use super::*;
    use crate::execution::KclValueView;
    use crate::execution::types::NumericType;
    use crate::execution::types::PrimitiveType;

    async fn assert_imported_pattern_executes(code: &str) {
        let current_file = std::path::Path::new(env!("CARGO_MANIFEST_DIR"))
            .join("tests")
            .join("inputs")
            .join("main.kcl");
        let program = crate::Program::parse_no_errs(code).unwrap();
        let ctx = crate::test_server::new_context(true, Some(current_file), true, program.language_version().unwrap())
            .await
            .unwrap();
        let result = ctx.run_with_caching(program).await.unwrap();

        let KclValueView::HomArray { value } = result.variables.get("patterned").unwrap() else {
            panic!("Expected the imported geometry pattern to return an array");
        };
        assert_eq!(value.len(), 3);
        assert!(
            value
                .iter()
                .all(|value| matches!(value, KclValueView::ImportedGeometry(_)))
        );
        let ids = value
            .iter()
            .map(|value| match value {
                KclValueView::ImportedGeometry(geometry) => geometry.id,
                _ => unreachable!(),
            })
            .collect::<std::collections::HashSet<_>>();
        assert_eq!(ids.len(), 3);

        ctx.close().await;
    }

    #[tokio::test(flavor = "multi_thread")]
    async fn imported_geometry_pattern_linear_3d() {
        assert_imported_pattern_executes(
            r#"import "cube.step" as cube

patterned = patternLinear3d(cube, instances = 3, distance = 20, axis = X)
"#,
        )
        .await;
    }

    #[tokio::test(flavor = "multi_thread")]
    async fn imported_geometry_pattern_circular_3d() {
        assert_imported_pattern_executes(
            r#"import "cube.step" as cube

patterned = patternCircular3d(cube, instances = 3, axis = Z, center = [20, 0, 0])
"#,
        )
        .await;
    }

    #[tokio::test(flavor = "multi_thread")]
    async fn imported_geometry_pattern_transform() {
        assert_imported_pattern_executes(
            r#"import "cube.step" as cube

fn shift(@i) {
  return { translate = [20 * i, 0, 0] }
}

patterned = patternTransform(cube, instances = 3, transform = shift)
"#,
        )
        .await;
    }

    #[tokio::test(flavor = "multi_thread")]
    async fn test_array_to_point3d() {
        let ctx = ExecutorContext::new_mock(None).await;
        let mut exec_state = ExecState::new(&ctx);
        let input = KclValue::HomArray {
            value: vec![
                KclValue::Number {
                    value: 1.1,
                    meta: Default::default(),
                    ty: NumericType::mm(),
                },
                KclValue::Number {
                    value: 2.2,
                    meta: Default::default(),
                    ty: NumericType::mm(),
                },
                KclValue::Number {
                    value: 3.3,
                    meta: Default::default(),
                    ty: NumericType::mm(),
                },
            ],
            ty: RuntimeType::Primitive(PrimitiveType::Number(NumericType::mm())),
        };
        let expected = [
            TyF64::new(1.1, NumericType::mm()),
            TyF64::new(2.2, NumericType::mm()),
            TyF64::new(3.3, NumericType::mm()),
        ];
        let actual = array_to_point3d(&input, Vec::new(), &mut exec_state);
        assert_eq!(actual.unwrap(), expected);
        ctx.close().await;
    }

    #[tokio::test(flavor = "multi_thread")]
    async fn test_tuple_to_point3d() {
        let ctx = ExecutorContext::new_mock(None).await;
        let mut exec_state = ExecState::new(&ctx);
        let input = KclValue::Tuple {
            value: vec![
                KclValue::Number {
                    value: 1.1,
                    meta: Default::default(),
                    ty: NumericType::mm(),
                },
                KclValue::Number {
                    value: 2.2,
                    meta: Default::default(),
                    ty: NumericType::mm(),
                },
                KclValue::Number {
                    value: 3.3,
                    meta: Default::default(),
                    ty: NumericType::mm(),
                },
            ],
            meta: Default::default(),
        };
        let expected = [
            TyF64::new(1.1, NumericType::mm()),
            TyF64::new(2.2, NumericType::mm()),
            TyF64::new(3.3, NumericType::mm()),
        ];
        let actual = array_to_point3d(&input, Vec::new(), &mut exec_state);
        assert_eq!(actual.unwrap(), expected);
        ctx.close().await;
    }

    fn pattern_linear_2d_code(kcl_version: &str, input: &str) -> String {
        format!(
            r#"@settings(kclVersion = {kcl_version}, defaultLengthUnit = mm, experimentalFeatures = allow)

profile = sketch(on = XY) {{
  circle1 = circle(start = [var 10mm, var 0mm], center = [var 0mm, var 0mm])
}}
patterned = patternLinear2d({input}, instances = 2, distance = 20mm, axis = X)
"#
        )
    }

    async fn run_mock(code: &str) -> Result<crate::ExecOutcome, crate::KclErrorWithOutputs> {
        let program = crate::Program::parse_no_errs(code).unwrap();
        let ctx = ExecutorContext::new_mock(None).await;
        let result = ctx.run_mock(&program, &crate::execution::MockConfig::default()).await;
        ctx.close().await;
        result
    }

    #[tokio::test(flavor = "multi_thread")]
    async fn pattern_linear_2d_with_sketch_warns_before_v3() {
        for version in ["1.0", "2.0"] {
            let code = pattern_linear_2d_code(version, "profile");
            let outcome = run_mock(&code).await.unwrap();
            let warnings = outcome
                .issues
                .iter()
                .filter(|issue| issue.message == PATTERN_LINEAR_2D_REGIONS_ONLY)
                .collect::<Vec<_>>();

            assert_eq!(
                warnings.len(),
                1,
                "unexpected issues for KCL {version}: {:#?}",
                outcome.issues
            );
            assert_eq!(warnings[0].severity, Severity::Warning);
        }
    }

    #[tokio::test(flavor = "multi_thread")]
    async fn pattern_linear_2d_with_sketch_is_an_error_in_v3() {
        let code = pattern_linear_2d_code(r#""3.0-preview""#, "profile");
        let error = run_mock(&code).await.unwrap_err();

        assert!(matches!(error.error, KclError::Semantic { .. }));
        assert_eq!(error.error.message(), PATTERN_LINEAR_2D_REGIONS_ONLY);
    }

    #[tokio::test(flavor = "multi_thread")]
    async fn pattern_linear_2d_with_region_is_allowed_in_v3() {
        let code = pattern_linear_2d_code(r#""3.0-preview""#, "region(segments = [profile.circle1])");
        let outcome = run_mock(&code).await.unwrap();

        assert!(
            outcome
                .issues
                .iter()
                .all(|issue| issue.message != PATTERN_LINEAR_2D_REGIONS_ONLY),
            "unexpected regions-only issue: {:#?}",
            outcome.issues
        );
    }

    #[tokio::test(flavor = "multi_thread")]
    async fn pattern_linear_2d_with_sketch_v1_profile_is_allowed() {
        let code = r#"@settings(kclVersion = 2.0, defaultLengthUnit = mm, experimentalFeatures = allow)

patterned = startSketchOn(XY)
  |> rectangle(width = 4mm, height = 3mm, center = [0mm, 0mm])
  |> patternLinear2d(instances = 10, distance = 10mm, axis = [1, 0])
"#;
        let outcome = run_mock(code).await.unwrap();

        assert!(
            outcome
                .issues
                .iter()
                .all(|issue| issue.message != PATTERN_LINEAR_2D_REGIONS_ONLY),
            "unexpected regions-only issue: {:#?}",
            outcome.issues
        );
    }
}

/// A linear pattern on a 2D sketch.
pub async fn pattern_linear_2d(exec_state: &mut ExecState, args: Args) -> Result<KclValue, KclError> {
    let sketches_source_range = args
        .unlabeled_kw_arg_unconverted()
        .map_or(args.source_range, |arg| arg.source_range);
    let sketches: Vec<Sketch> = args.get_unlabeled_kw_arg("sketches", &RuntimeType::sketches(), exec_state)?;
    let instances: u32 = args.get_kw_arg("instances", &RuntimeType::count(), exec_state)?;
    let distance: TyF64 = args.get_kw_arg("distance", &RuntimeType::length(), exec_state)?;
    let axis: Axis2dOrPoint2d = args.get_kw_arg(
        "axis",
        &RuntimeType::Union(vec![
            RuntimeType::Primitive(PrimitiveType::Axis2d),
            RuntimeType::point2d(),
        ]),
        exec_state,
    )?;
    let use_original = args.get_kw_arg_opt("useOriginal", &RuntimeType::bool(), exec_state)?;

    let has_sketch_solver_block = sketches.iter().any(|sketch| {
        sketch.origin_sketch_id.is_none()
            && (exec_state.is_sketch_block_path(sketch.artifact_id)
                || exec_state.is_sketch_block_path(sketch.original_id.into()))
    });
    if has_sketch_solver_block {
        if exec_state.kcl_version() >= KclVersion::V3Preview {
            return Err(KclError::new_semantic(KclErrorDetails::new(
                PATTERN_LINEAR_2D_REGIONS_ONLY.to_owned(),
                vec![sketches_source_range],
            )));
        }

        exec_state.warn(
            CompilationIssue {
                source_range: sketches_source_range,
                message: PATTERN_LINEAR_2D_REGIONS_ONLY.to_owned(),
                suggestion: None,
                severity: Severity::Warning,
                tag: Tag::Deprecated,
            },
            annotations::WARN_DEPRECATED,
        );
    }

    let axis = axis.to_point2d();
    if axis[0].n == 0.0 && axis[1].n == 0.0 {
        return Err(KclError::new_semantic(KclErrorDetails::new(
            "The axis of the linear pattern cannot be the zero vector. Otherwise they will just duplicate in place."
                .to_owned(),
            vec![args.source_range],
        )));
    }

    let sketches = inner_pattern_linear_2d(sketches, instances, distance, axis, use_original, exec_state, args).await?;
    Ok(sketches.into())
}

async fn inner_pattern_linear_2d(
    sketches: Vec<Sketch>,
    instances: u32,
    distance: TyF64,
    axis: [TyF64; 2],
    use_original: Option<bool>,
    exec_state: &mut ExecState,
    args: Args,
) -> Result<Vec<Sketch>, KclError> {
    let [x, y] = point_to_mm(axis);
    let axis_len = f64::sqrt(x * x + y * y);
    let normalized_axis = kcmc::shared::Point2d::from([x / axis_len, y / axis_len]);
    let transforms: Vec<_> = (1..instances)
        .map(|i| {
            let d = distance.unwrap_to_mm() * (i as f64);
            let translate = (normalized_axis * d).with_z(0.0).map(LengthUnit);
            vec![Transform::builder().translate(translate).build()]
        })
        .collect();
    execute_pattern_transform(
        transforms,
        sketches,
        use_original.unwrap_or_default(),
        exec_state,
        &args,
    )
    .await
}

/// A linear pattern on a 3D model.
pub async fn pattern_linear_3d(exec_state: &mut ExecState, args: Args) -> Result<KclValue, KclError> {
    let geometry: SolidOrImportedGeometry =
        args.get_unlabeled_kw_arg("solids", &pattern_geometry_3d_type(), exec_state)?;
    let instances: u32 = args.get_kw_arg("instances", &RuntimeType::count(), exec_state)?;
    let distance: TyF64 = args.get_kw_arg("distance", &RuntimeType::length(), exec_state)?;
    let axis: Axis3dOrPoint3d = args.get_kw_arg(
        "axis",
        &RuntimeType::Union(vec![
            RuntimeType::Primitive(PrimitiveType::Axis3d),
            RuntimeType::point3d(),
        ]),
        exec_state,
    )?;
    let use_original = args.get_kw_arg_opt("useOriginal", &RuntimeType::bool(), exec_state)?;

    let axis = axis.to_point3d();
    if axis[0].n == 0.0 && axis[1].n == 0.0 && axis[2].n == 0.0 {
        return Err(KclError::new_semantic(KclErrorDetails::new(
            "The axis of the linear pattern cannot be the zero vector. Otherwise they will just duplicate in place."
                .to_owned(),
            vec![args.source_range],
        )));
    }

    match geometry {
        SolidOrImportedGeometry::SolidSet(solids) => {
            Ok(
                inner_pattern_linear_3d(solids, instances, distance, axis, use_original, exec_state, args)
                    .await?
                    .into(),
            )
        }
        SolidOrImportedGeometry::ImportedGeometry(geometry) => Ok(KclValue::from_imported_geometries(
            inner_pattern_linear_3d(
                vec![*geometry],
                instances,
                distance,
                axis,
                use_original,
                exec_state,
                args,
            )
            .await?,
        )),
    }
}

async fn inner_pattern_linear_3d<T: GeometryTrait<Set = Vec<T>>>(
    geometry: Vec<T>,
    instances: u32,
    distance: TyF64,
    axis: [TyF64; 3],
    use_original: Option<bool>,
    exec_state: &mut ExecState,
    args: Args,
) -> Result<Vec<T>, KclError> {
    let [x, y, z] = point_3d_to_mm(axis);
    let axis_len = f64::sqrt(x * x + y * y + z * z);
    let normalized_axis = kcmc::shared::Point3d::from([x / axis_len, y / axis_len, z / axis_len]);
    let transforms: Vec<_> = (1..instances)
        .map(|i| {
            let d = distance.unwrap_to_mm() * (i as f64);
            let translate = (normalized_axis * d).map(LengthUnit);
            vec![Transform::builder().translate(translate).build()]
        })
        .collect();
    execute_pattern_transform(
        transforms,
        geometry,
        use_original.unwrap_or_default(),
        exec_state,
        &args,
    )
    .await
}

/// Data for a circular pattern on a 2D sketch.
#[derive(Debug, Clone, Serialize, PartialEq)]
#[serde(rename_all = "camelCase")]
struct CircularPattern2dData {
    /// The number of total instances. Must be greater than or equal to 1.
    /// This includes the original entity. For example, if instances is 2,
    /// there will be two copies -- the original, and one new copy.
    /// If instances is 1, this has no effect.
    pub instances: u32,
    /// The center about which to make the pattern. This is a 2D vector.
    pub center: [TyF64; 2],
    /// The arc angle (in degrees) to place the repetitions. Must be greater than 0.
    pub arc_degrees: Option<f64>,
    /// Whether or not to rotate the duplicates as they are copied.
    pub rotate_duplicates: Option<bool>,
    /// If the target being patterned is itself a pattern, then, should you use the original solid,
    /// or the pattern?
    #[serde(default)]
    pub use_original: Option<bool>,
}

/// Data for a circular pattern on a 3D model.
#[derive(Debug, Clone, Serialize, PartialEq)]
#[serde(rename_all = "camelCase")]
struct CircularPattern3dData {
    /// The number of total instances. Must be greater than or equal to 1.
    /// This includes the original entity. For example, if instances is 2,
    /// there will be two copies -- the original, and one new copy.
    /// If instances is 1, this has no effect.
    pub instances: u32,
    /// The axis around which to make the pattern. This is a 3D vector.
    // Only the direction should matter, not the magnitude so don't adjust units to avoid normalisation issues.
    pub axis: [f64; 3],
    /// The center about which to make the pattern. This is a 3D vector.
    pub center: [TyF64; 3],
    /// The arc angle (in degrees) to place the repetitions. Must be greater than 0.
    pub arc_degrees: Option<f64>,
    /// Whether or not to rotate the duplicates as they are copied.
    pub rotate_duplicates: Option<bool>,
    /// If the target being patterned is itself a pattern, then, should you use the original solid,
    /// or the pattern?
    #[serde(default)]
    pub use_original: Option<bool>,
}

#[allow(clippy::large_enum_variant)]
#[derive(Clone)]
enum CircularPattern {
    ThreeD(CircularPattern3dData),
    TwoD(CircularPattern2dData),
}

enum RepetitionsNeeded {
    /// Add this number of repetitions
    More(u32),
    /// No repetitions needed
    None,
    /// Invalid number of total instances.
    Invalid,
}

impl From<u32> for RepetitionsNeeded {
    fn from(n: u32) -> Self {
        match n.cmp(&1) {
            Ordering::Less => Self::Invalid,
            Ordering::Equal => Self::None,
            Ordering::Greater => Self::More(n - 1),
        }
    }
}

impl CircularPattern {
    pub fn axis(&self) -> [f64; 3] {
        match self {
            CircularPattern::TwoD(_lp) => [0.0, 0.0, 0.0],
            CircularPattern::ThreeD(lp) => [lp.axis[0], lp.axis[1], lp.axis[2]],
        }
    }

    pub fn center_mm(&self) -> [f64; 3] {
        match self {
            CircularPattern::TwoD(lp) => [lp.center[0].unwrap_to_mm(), lp.center[1].unwrap_to_mm(), 0.0],
            CircularPattern::ThreeD(lp) => [
                lp.center[0].unwrap_to_mm(),
                lp.center[1].unwrap_to_mm(),
                lp.center[2].unwrap_to_mm(),
            ],
        }
    }

    fn repetitions(&self) -> RepetitionsNeeded {
        let n = match self {
            CircularPattern::TwoD(lp) => lp.instances,
            CircularPattern::ThreeD(lp) => lp.instances,
        };
        RepetitionsNeeded::from(n)
    }

    pub fn arc_degrees(&self) -> Option<f64> {
        match self {
            CircularPattern::TwoD(lp) => lp.arc_degrees,
            CircularPattern::ThreeD(lp) => lp.arc_degrees,
        }
    }

    pub fn rotate_duplicates(&self) -> Option<bool> {
        match self {
            CircularPattern::TwoD(lp) => lp.rotate_duplicates,
            CircularPattern::ThreeD(lp) => lp.rotate_duplicates,
        }
    }

    pub fn use_original(&self) -> bool {
        match self {
            CircularPattern::TwoD(lp) => lp.use_original.unwrap_or_default(),
            CircularPattern::ThreeD(lp) => lp.use_original.unwrap_or_default(),
        }
    }
}

/// A circular pattern on a 2D sketch.
pub async fn pattern_circular_2d(exec_state: &mut ExecState, args: Args) -> Result<KclValue, KclError> {
    let sketches = args.get_unlabeled_kw_arg("sketches", &RuntimeType::sketches(), exec_state)?;
    let instances: u32 = args.get_kw_arg("instances", &RuntimeType::count(), exec_state)?;
    let center: Option<[TyF64; 2]> = args.get_kw_arg_opt("center", &RuntimeType::point2d(), exec_state)?;
    let arc_degrees: Option<TyF64> = args.get_kw_arg_opt("arcDegrees", &RuntimeType::degrees(), exec_state)?;
    let rotate_duplicates = args.get_kw_arg_opt("rotateDuplicates", &RuntimeType::bool(), exec_state)?;
    let use_original = args.get_kw_arg_opt("useOriginal", &RuntimeType::bool(), exec_state)?;

    let sketches = inner_pattern_circular_2d(
        sketches,
        instances,
        center,
        arc_degrees.map(|x| x.n),
        rotate_duplicates,
        use_original,
        exec_state,
        args,
    )
    .await?;
    Ok(sketches.into())
}

#[allow(clippy::too_many_arguments)]
async fn inner_pattern_circular_2d(
    sketch_set: Vec<Sketch>,
    instances: u32,
    center: Option<[TyF64; 2]>,
    arc_degrees: Option<f64>,
    rotate_duplicates: Option<bool>,
    use_original: Option<bool>,
    exec_state: &mut ExecState,
    args: Args,
) -> Result<Vec<Sketch>, KclError> {
    let starting_sketches = sketch_set;

    if args.ctx.context_type == crate::execution::ContextType::Mock {
        return Ok(starting_sketches);
    }
    let center = center.unwrap_or(POINT_ZERO_ZERO);
    let data = CircularPattern2dData {
        instances,
        center,
        arc_degrees,
        rotate_duplicates,
        use_original,
    };

    let mut sketches = Vec::new();
    for sketch in starting_sketches.iter() {
        let geometries =
            pattern_circular_sketch(data.clone(), Geometry::Sketch(sketch.clone()), exec_state, args.clone()).await?;

        let Geometries::Sketches(new_sketches) = geometries else {
            return Err(KclError::new_semantic(KclErrorDetails::new(
                "Expected a vec of sketches".to_string(),
                vec![args.source_range],
            )));
        };

        sketches.extend(new_sketches);
    }

    Ok(sketches)
}

async fn pattern_circular_sketch(
    data: CircularPattern2dData,
    geometry: Geometry,
    exec_state: &mut ExecState,
    args: Args,
) -> Result<Geometries, KclError> {
    let Geometry::Sketch(mut sketch) = geometry else {
        return Err(KclError::new_internal(KclErrorDetails::new(
            "A 2D circular pattern requires a sketch".to_owned(),
            vec![args.source_range],
        )));
    };
    let geometries = pattern_circular(&CircularPattern::TwoD(data), &mut sketch, exec_state, &args).await?;
    Ok(Geometries::Sketches(geometries))
}

/// A circular pattern on a 3D model.
pub async fn pattern_circular_3d(exec_state: &mut ExecState, args: Args) -> Result<KclValue, KclError> {
    let geometry: SolidOrImportedGeometry =
        args.get_unlabeled_kw_arg("solids", &pattern_geometry_3d_type(), exec_state)?;
    // The number of total instances. Must be greater than or equal to 1.
    // This includes the original entity. For example, if instances is 2,
    // there will be two copies -- the original, and one new copy.
    // If instances is 1, this has no effect.
    let instances: u32 = args.get_kw_arg("instances", &RuntimeType::count(), exec_state)?;
    // The axis around which to make the pattern. This is a 3D vector.
    let axis: Axis3dOrPoint3d = args.get_kw_arg(
        "axis",
        &RuntimeType::Union(vec![
            RuntimeType::Primitive(PrimitiveType::Axis3d),
            RuntimeType::point3d(),
        ]),
        exec_state,
    )?;
    let axis = axis.to_point3d();

    // The center about which to make the pattern. This is a 3D vector.
    let center: Option<[TyF64; 3]> = args.get_kw_arg_opt("center", &RuntimeType::point3d(), exec_state)?;
    // The arc angle (in degrees) to place the repetitions. Must be greater than 0.
    let arc_degrees: Option<TyF64> = args.get_kw_arg_opt("arcDegrees", &RuntimeType::degrees(), exec_state)?;
    // Whether or not to rotate the duplicates as they are copied.
    let rotate_duplicates = args.get_kw_arg_opt("rotateDuplicates", &RuntimeType::bool(), exec_state)?;
    // If the target being patterned is itself a pattern, then, should you use the original solid,
    // or the pattern?
    let use_original = args.get_kw_arg_opt("useOriginal", &RuntimeType::bool(), exec_state)?;

    match geometry {
        SolidOrImportedGeometry::SolidSet(solids) => Ok(inner_pattern_circular_3d(
            solids,
            instances,
            [axis[0].n, axis[1].n, axis[2].n],
            center,
            arc_degrees.map(|x| x.n),
            rotate_duplicates,
            use_original,
            exec_state,
            args,
        )
        .await?
        .into()),
        SolidOrImportedGeometry::ImportedGeometry(geometry) => Ok(KclValue::from_imported_geometries(
            inner_pattern_circular_3d(
                vec![*geometry],
                instances,
                [axis[0].n, axis[1].n, axis[2].n],
                center,
                arc_degrees.map(|x| x.n),
                rotate_duplicates,
                use_original,
                exec_state,
                args,
            )
            .await?,
        )),
    }
}

#[allow(clippy::too_many_arguments)]
async fn inner_pattern_circular_3d<T: GeometryTrait<Set = Vec<T>>>(
    geometry: Vec<T>,
    instances: u32,
    axis: [f64; 3],
    center: Option<[TyF64; 3]>,
    arc_degrees: Option<f64>,
    rotate_duplicates: Option<bool>,
    use_original: Option<bool>,
    exec_state: &mut ExecState,
    args: Args,
) -> Result<Vec<T>, KclError> {
    let center = center.unwrap_or(POINT_ZERO_ZERO_ZERO);
    let data = CircularPattern3dData {
        instances,
        axis,
        center,
        arc_degrees,
        rotate_duplicates,
        use_original,
    };
    execute_pattern_circular(CircularPattern::ThreeD(data), geometry, exec_state, args).await
}

async fn execute_pattern_circular<T: GeometryTrait>(
    data: CircularPattern,
    geometry_set: T::Set,
    exec_state: &mut ExecState,
    args: Args,
) -> Result<Vec<T>, KclError> {
    T::flush_batch(&args, exec_state, &geometry_set).await?;
    let starting: Vec<T> = geometry_set.into();
    if args.ctx.context_type == crate::execution::ContextType::Mock {
        let seed = starting
            .first()
            .cloned()
            .ok_or(KclError::new_internal(KclErrorDetails::new(
                "Unexpected empty set".to_owned(),
                vec![args.source_range],
            )))?;
        let mut mock_responses = starting;
        let num_repetitions = match data.repetitions() {
            RepetitionsNeeded::More(n) => n,
            RepetitionsNeeded::None => {
                return Ok(mock_responses);
            }
            RepetitionsNeeded::Invalid => {
                return Err(KclError::new_semantic(KclErrorDetails::new(
                    MUST_HAVE_ONE_INSTANCE.to_owned(),
                    vec![args.source_range],
                )));
            }
        };
        for _ in 0..num_repetitions {
            let new_id = exec_state.next_uuid();
            let mut new_geometry = seed.clone();
            new_geometry.set_id(new_id);
            new_geometry.set_artifact_id(new_id);
            mock_responses.push(new_geometry);
        }

        return Ok(mock_responses);
    }

    let mut output = Vec::new();
    for mut geometry in starting {
        output.extend(pattern_circular(&data, &mut geometry, exec_state, &args).await?);
    }
    Ok(output)
}

async fn pattern_circular<T: GeometryTrait>(
    data: &CircularPattern,
    geometry: &mut T,
    exec_state: &mut ExecState,
    args: &Args,
) -> Result<Vec<T>, KclError> {
    let num_repetitions = match data.repetitions() {
        RepetitionsNeeded::More(n) => n,
        RepetitionsNeeded::None => {
            return Ok(vec![geometry.clone()]);
        }
        RepetitionsNeeded::Invalid => {
            return Err(KclError::new_semantic(KclErrorDetails::new(
                MUST_HAVE_ONE_INSTANCE.to_owned(),
                vec![args.source_range],
            )));
        }
    };

    let geometry_id = geometry.id(&args.ctx).await?;
    let center = data.center_mm();
    let resp = exec_state
        .send_modeling_cmd(
            ModelingCmdMeta::from_args(exec_state, args),
            ModelingCmd::from(
                mcmd::EntityCircularPattern::builder()
                    .axis(kcmc::shared::Point3d::from(data.axis()))
                    .entity_id(if data.use_original() {
                        geometry.topology_id()
                    } else {
                        geometry_id
                    })
                    .center(kcmc::shared::Point3d {
                        x: LengthUnit(center[0]),
                        y: LengthUnit(center[1]),
                        z: LengthUnit(center[2]),
                    })
                    .num_repetitions(num_repetitions)
                    .arc_degrees(data.arc_degrees().unwrap_or(360.0))
                    .rotate_duplicates(data.rotate_duplicates().unwrap_or(true))
                    .build(),
            ),
        )
        .await?;

    // The common case is borrowing from the response.  Instead of cloning,
    // create a Vec to borrow from in mock mode.
    let mut mock_ids = Vec::new();
    let entity_ids = if let OkWebSocketResponseData::Modeling {
        modeling_response: OkModelingCmdResponse::EntityCircularPattern(pattern_info),
    } = &resp
    {
        &pattern_info.entity_face_edge_ids.iter().map(|e| e.object_id).collect()
    } else if args.ctx.no_engine_commands().await {
        mock_ids.reserve(num_repetitions as usize);
        for _ in 0..num_repetitions {
            mock_ids.push(exec_state.next_uuid());
        }
        &mock_ids
    } else {
        return Err(KclError::new_engine(KclErrorDetails::new(
            format!("EntityCircularPattern response was not as expected: {resp:?}"),
            vec![args.source_range],
        )));
    };

    let mut geometries = vec![geometry.clone()];
    for id in entity_ids.iter().copied() {
        let mut new_geometry = geometry.clone();
        new_geometry.set_id(id);
        new_geometry.set_artifact_id(id);
        geometries.push(new_geometry);
    }
    Ok(geometries)
}