Struct itsybitsy_m0::Pins
source · pub struct Pins {Show 33 fields
pub aref: Pin<PA03, Reset>,
pub a0: Pin<PA02, Reset>,
pub a1: Pin<PB08, Reset>,
pub a2: Pin<PB09, Reset>,
pub a3: Pin<PA04, Reset>,
pub a4: Pin<PA05, Reset>,
pub a5: Pin<PB02, Reset>,
pub d0: Pin<PA11, Reset>,
pub d1: Pin<PA10, Reset>,
pub d2: Pin<PA14, Reset>,
pub d3: Pin<PA09, Reset>,
pub d4: Pin<PA08, Reset>,
pub d5: Pin<PA15, Reset>,
pub d7: Pin<PA21, Reset>,
pub d9: Pin<PA07, Reset>,
pub d10: Pin<PA18, Reset>,
pub d11: Pin<PA16, Reset>,
pub d12: Pin<PA19, Reset>,
pub d13: Pin<PA17, Reset>,
pub sda: Pin<PA22, Reset>,
pub scl: Pin<PA23, Reset>,
pub sclk: Pin<PB11, Reset>,
pub mosi: Pin<PB10, Reset>,
pub miso: Pin<PA12, Reset>,
pub usb_dm: Pin<PA24, Reset>,
pub usb_dp: Pin<PA25, Reset>,
pub flash_sclk: Pin<PB23, Reset>,
pub flash_mosi: Pin<PB22, Reset>,
pub flash_miso: Pin<PB03, Reset>,
pub flash_cs: Pin<PA27, Reset>,
pub dotstar_sck: Pin<PA00, Reset>,
pub dotstar_mosi: Pin<PA01, Reset>,
pub dotstar_miso: Pin<PA13, Reset>,
/* private fields */
}
Expand description
BSP replacement for the HAL
Pins
type
This type is intended to provide more meaningful names for the given pins.
Fields§
§aref: Pin<PA03, Reset>
AREF pin - has 1uF capacitor to ground
a0: Pin<PA02, Reset>
Analog pin 0. Also hardware capacitive touch capability
Can act as a true analog output as it has a DAC (which is not
currently supported by this hal) as well as input.
This field can also be accessed using the pin_alias!
macro with the following alternate names:
a0,
a1: Pin<PB08, Reset>
Analog Pin 1, PWM capable, hardware capacitive touch capability
a2: Pin<PB09, Reset>
Analog Pin 2, PWM capable, hardware capacitive touch capability
a3: Pin<PA04, Reset>
Analog Pin 3, hardware capacitive touch capability
a4: Pin<PA05, Reset>
Analog Pin 4, hardware capacitive touch capability
a5: Pin<PB02, Reset>
Analog Pin 5, hardware capacitive touch capability
d0: Pin<PA11, Reset>
Pin 0, rx. Also analog input or I2S LRCLK
This field can also be accessed using the pin_alias!
macro with the following alternate names:
uart_rx,
d1: Pin<PA10, Reset>
Pin 1, tx. Also analog input or I2S bitclock
This field can also be accessed using the pin_alias!
macro with the following alternate names:
uart_tx,
d2: Pin<PA14, Reset>
Pin 2
d3: Pin<PA09, Reset>
Pin 3, PWM capable. Also analog input or I2S master clock
d4: Pin<PA08, Reset>
Pin 4, PWM capable. Also analog input or I2S data channel 1. Cannot be interrupt pin
d5: Pin<PA15, Reset>
Pin 5, PWM capable. This is a special OUTPUT-only pin, that is level-shifted up to Vhi voltage
This field can also be accessed using the pin_alias!
macro with the following alternate names:
d5_pwm,
d7: Pin<PA21, Reset>
Pin 7. Also I2S LRCLK
d9: Pin<PA07, Reset>
Pin 9, PWM capable, hardware capacitive touch capability Also analog input or I2S data channel 0
d10: Pin<PA18, Reset>
Pin 10, PWM capable
d11: Pin<PA16, Reset>
Pin 11, PWM capable
d12: Pin<PA19, Reset>
Pin 12. Also I2S data channel 0
d13: Pin<PA17, Reset>
Pin 13, which is also attached to the red LED. PWM capable.
This field can also be accessed using the pin_alias!
macro with the following alternate names:
red_led,
sda: Pin<PA22, Reset>
The I2C data line
This field can also be accessed using the pin_alias!
macro with the following alternate names:
sda,
scl: Pin<PA23, Reset>
The I2C clock line
This field can also be accessed using the pin_alias!
macro with the following alternate names:
scl,
sclk: Pin<PB11, Reset>
The SPI SCLK
This field can also be accessed using the pin_alias!
macro with the following alternate names:
sclk,
mosi: Pin<PB10, Reset>
The SPI MOSI
This field can also be accessed using the pin_alias!
macro with the following alternate names:
mosi,
miso: Pin<PA12, Reset>
The SPI MISO
This field can also be accessed using the pin_alias!
macro with the following alternate names:
miso,
usb_dm: Pin<PA24, Reset>
The USB D- pad
This field can also be accessed using the pin_alias!
macro with the following alternate names:
usb_dm,
usb_dp: Pin<PA25, Reset>
The USB D+ pad
This field can also be accessed using the pin_alias!
macro with the following alternate names:
usb_dp,
flash_sclk: Pin<PB23, Reset>
SPI clock for the on-board SPI flash
flash_mosi: Pin<PB22, Reset>
SPI MOSI for the on-board SPI flash
flash_miso: Pin<PB03, Reset>
SPI MISO for the on-board SPI flash
flash_cs: Pin<PA27, Reset>
SPI chip select for the on-board SPI flash
dotstar_sck: Pin<PA00, Reset>
SPI SCK line for the Apa102 builtin Dotstar led
This field can also be accessed using the pin_alias!
macro with the following alternate names:
dot_star_clk,
dotstar_mosi: Pin<PA01, Reset>
SPI MOSI line for the Apa102 builtin Dotstar led
This field can also be accessed using the pin_alias!
macro with the following alternate names:
dot_star_data,
dotstar_miso: Pin<PA13, Reset>
Not connected, used as the SPI MISO line for the Apa102 builtin Dotstar led
This field can also be accessed using the pin_alias!
macro with the following alternate names:
dot_star_n_c,