[−][src]Type Definition imxrt1062_csi::csicr3::R
type R = R<u32, CSICR3>;
Reader of register CSICR3
Methods
impl R
[src]
pub fn ecc_auto_en(&self) -> ECC_AUTO_EN_R
[src]
Bit 0 - Automatic Error Correction Enable
pub fn ecc_int_en(&self) -> ECC_INT_EN_R
[src]
Bit 1 - Error Detection Interrupt Enable
pub fn zero_pack_en(&self) -> ZERO_PACK_EN_R
[src]
Bit 2 - Dummy Zero Packing Enable
pub fn two_8bit_sensor(&self) -> TWO_8BIT_SENSOR_R
[src]
Bit 3 - Two 8-bit Sensor Mode
pub fn rx_ff_level(&self) -> RXFF_LEVEL_R
[src]
Bits 4:6 - RxFIFO Full Level
pub fn hresp_err_en(&self) -> HRESP_ERR_EN_R
[src]
Bit 7 - Hresponse Error Enable. This bit enables the hresponse error interrupt.
pub fn statff_level(&self) -> STATFF_LEVEL_R
[src]
Bits 8:10 - STATFIFO Full Level
pub fn dma_req_en_sff(&self) -> DMA_REQ_EN_SFF_R
[src]
Bit 11 - DMA Request Enable for STATFIFO
pub fn dma_req_en_rff(&self) -> DMA_REQ_EN_RFF_R
[src]
Bit 12 - DMA Request Enable for RxFIFO
pub fn dma_reflash_sff(&self) -> DMA_REFLASH_SFF_R
[src]
Bit 13 - Reflash DMA Controller for STATFIFO
pub fn dma_reflash_rff(&self) -> DMA_REFLASH_RFF_R
[src]
Bit 14 - Reflash DMA Controller for RxFIFO
pub fn frmcnt_rst(&self) -> FRMCNT_RST_R
[src]
Bit 15 - Frame Count Reset. Resets the Frame Counter. (Cleared automatically after reset is done)
pub fn frmcnt(&self) -> FRMCNT_R
[src]
Bits 16:31 - Frame Counter