hive_btle/platform/
mock.rs

1// Copyright (c) 2025-2026 (r)evolve - Revolve Team LLC
2// SPDX-License-Identifier: Apache-2.0
3//
4// Licensed under the Apache License, Version 2.0 (the "License");
5// you may not use this file except in compliance with the License.
6// You may obtain a copy of the License at
7//
8//     http://www.apache.org/licenses/LICENSE-2.0
9//
10// Unless required by applicable law or agreed to in writing, software
11// distributed under the License is distributed on an "AS IS" BASIS,
12// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13// See the License for the specific language governing permissions and
14// limitations under the License.
15
16//! Mock BLE adapter for testing
17//!
18//! This module provides a simulated BLE adapter that enables unit and integration
19//! testing of HIVE mesh logic without requiring actual BLE hardware.
20//!
21//! ## Features
22//!
23//! - Simulated device discovery and advertising
24//! - Configurable connection behavior (success, failure, latency)
25//! - Event tracking for test assertions
26//! - Multi-node simulation via shared state
27//!
28//! ## Example
29//!
30//! ```rust,no_run
31//! use hive_btle::platform::mock::{MockBleAdapter, MockNetwork};
32//! use hive_btle::platform::BleAdapter;
33//! use hive_btle::config::{BleConfig, DiscoveryConfig};
34//! use hive_btle::NodeId;
35//!
36//! # async fn example() -> Result<(), Box<dyn std::error::Error>> {
37//! // Create a shared network for multiple mock nodes
38//! let network = MockNetwork::new();
39//!
40//! // Create two mock adapters on the same network
41//! let mut adapter1 = MockBleAdapter::new(NodeId::new(0x111), network.clone());
42//! let mut adapter2 = MockBleAdapter::new(NodeId::new(0x222), network.clone());
43//!
44//! // Initialize and start both adapters
45//! adapter1.init(&BleConfig::default()).await?;
46//! adapter2.init(&BleConfig::default()).await?;
47//!
48//! // Start advertising on adapter2 so it can be discovered
49//! adapter2.start_advertising(&DiscoveryConfig::default()).await?;
50//!
51//! // Connect adapter1 to adapter2
52//! let conn = adapter1.connect(&NodeId::new(0x222)).await?;
53//! assert!(conn.is_alive());
54//! # Ok(())
55//! # }
56//! ```
57
58use std::collections::HashMap;
59use std::sync::atomic::{AtomicBool, AtomicI8, AtomicU16, Ordering};
60use std::sync::{Arc, Mutex, RwLock};
61use std::time::{Duration, Instant};
62
63use async_trait::async_trait;
64
65use crate::config::{BleConfig, BlePhy, DiscoveryConfig};
66use crate::error::{BleError, Result};
67use crate::platform::{
68    BleAdapter, ConnectionCallback, ConnectionEvent, DisconnectReason, DiscoveredDevice,
69    DiscoveryCallback,
70};
71use crate::transport::BleConnection;
72use crate::NodeId;
73
74/// Shared network state for multiple mock adapters
75///
76/// Allows multiple `MockBleAdapter` instances to "see" each other and
77/// simulate BLE discovery and connections.
78#[derive(Clone, Default)]
79pub struct MockNetwork {
80    inner: Arc<MockNetworkInner>,
81}
82
83#[derive(Default)]
84struct MockNetworkInner {
85    /// All nodes currently advertising on the network
86    advertising_nodes: RwLock<HashMap<NodeId, AdvertisingNode>>,
87    /// Active connections (bidirectional)
88    connections: RwLock<HashMap<(NodeId, NodeId), ConnectionState>>,
89    /// Data sent between nodes
90    data_queue: Mutex<HashMap<NodeId, Vec<DataPacket>>>,
91}
92
93/// An advertising node on the mock network
94#[derive(Clone)]
95struct AdvertisingNode {
96    node_id: NodeId,
97    address: String,
98    name: Option<String>,
99    rssi: i8,
100    adv_data: Vec<u8>,
101}
102
103/// State of a connection
104#[derive(Clone)]
105struct ConnectionState {
106    alive: Arc<AtomicBool>,
107}
108
109/// A data packet sent between nodes
110#[derive(Clone)]
111pub struct DataPacket {
112    /// Source node
113    pub from: NodeId,
114    /// Destination node
115    pub to: NodeId,
116    /// Payload data
117    pub data: Vec<u8>,
118    /// When it was sent
119    pub timestamp: Instant,
120}
121
122impl MockNetwork {
123    /// Create a new mock network
124    pub fn new() -> Self {
125        Self::default()
126    }
127
128    /// Register a node as advertising
129    pub fn start_advertising(&self, node_id: NodeId, address: &str, name: Option<&str>) {
130        let mut nodes = self.inner.advertising_nodes.write().unwrap();
131        nodes.insert(
132            node_id,
133            AdvertisingNode {
134                node_id,
135                address: address.to_string(),
136                name: name.map(|s| s.to_string()),
137                rssi: -50, // Default good signal
138                adv_data: vec![],
139            },
140        );
141    }
142
143    /// Stop advertising for a node
144    pub fn stop_advertising(&self, node_id: &NodeId) {
145        let mut nodes = self.inner.advertising_nodes.write().unwrap();
146        nodes.remove(node_id);
147    }
148
149    /// Get all advertising nodes visible to a given node
150    pub fn discover_nodes(&self, observer: &NodeId) -> Vec<DiscoveredDevice> {
151        let nodes = self.inner.advertising_nodes.read().unwrap();
152        nodes
153            .values()
154            .filter(|n| &n.node_id != observer)
155            .map(|n| DiscoveredDevice {
156                address: n.address.clone(),
157                name: n.name.clone(),
158                rssi: n.rssi,
159                is_hive_node: true,
160                node_id: Some(n.node_id),
161                adv_data: n.adv_data.clone(),
162            })
163            .collect()
164    }
165
166    /// Establish a connection between two nodes
167    pub fn connect(&self, from: &NodeId, to: &NodeId) -> Result<()> {
168        // Check if target is advertising
169        {
170            let nodes = self.inner.advertising_nodes.read().unwrap();
171            if !nodes.contains_key(to) {
172                return Err(BleError::ConnectionFailed(format!(
173                    "Node {} is not advertising",
174                    to
175                )));
176            }
177        }
178
179        // Create connection state
180        let state = ConnectionState {
181            alive: Arc::new(AtomicBool::new(true)),
182        };
183
184        // Store bidirectionally
185        let mut connections = self.inner.connections.write().unwrap();
186        connections.insert((*from, *to), state.clone());
187        connections.insert((*to, *from), state);
188
189        Ok(())
190    }
191
192    /// Disconnect two nodes
193    pub fn disconnect(&self, from: &NodeId, to: &NodeId) {
194        let mut connections = self.inner.connections.write().unwrap();
195        if let Some(state) = connections.remove(&(*from, *to)) {
196            state.alive.store(false, Ordering::SeqCst);
197        }
198        if let Some(state) = connections.remove(&(*to, *from)) {
199            state.alive.store(false, Ordering::SeqCst);
200        }
201    }
202
203    /// Check if two nodes are connected
204    pub fn is_connected(&self, from: &NodeId, to: &NodeId) -> bool {
205        let connections = self.inner.connections.read().unwrap();
206        connections
207            .get(&(*from, *to))
208            .is_some_and(|c| c.alive.load(Ordering::SeqCst))
209    }
210
211    /// Send data from one node to another
212    pub fn send_data(&self, from: &NodeId, to: &NodeId, data: Vec<u8>) -> Result<()> {
213        // Check if connection exists
214        {
215            let connections = self.inner.connections.read().unwrap();
216            if !connections.contains_key(&(*from, *to)) {
217                return Err(BleError::ConnectionFailed(format!(
218                    "No connection from {} to {}",
219                    from, to
220                )));
221            }
222        }
223
224        // Queue the data
225        let mut queue = self.inner.data_queue.lock().unwrap();
226        let packets = queue.entry(*to).or_default();
227        packets.push(DataPacket {
228            from: *from,
229            to: *to,
230            data,
231            timestamp: Instant::now(),
232        });
233
234        Ok(())
235    }
236
237    /// Receive pending data for a node
238    pub fn receive_data(&self, node_id: &NodeId) -> Vec<DataPacket> {
239        let mut queue = self.inner.data_queue.lock().unwrap();
240        queue.remove(node_id).unwrap_or_default()
241    }
242
243    /// Get all connected peers for a node
244    pub fn connected_peers(&self, node_id: &NodeId) -> Vec<NodeId> {
245        let connections = self.inner.connections.read().unwrap();
246        connections
247            .keys()
248            .filter(|(from, _)| from == node_id)
249            .map(|(_, to)| *to)
250            .collect()
251    }
252
253    /// Clear all network state (for test cleanup)
254    pub fn reset(&self) {
255        self.inner.advertising_nodes.write().unwrap().clear();
256        self.inner.connections.write().unwrap().clear();
257        self.inner.data_queue.lock().unwrap().clear();
258    }
259}
260
261/// Mock BLE connection
262pub struct MockConnection {
263    peer_id: NodeId,
264    mtu: AtomicU16,
265    phy: BlePhy,
266    rssi: AtomicI8,
267    alive: Arc<AtomicBool>,
268    established_at: Instant,
269}
270
271impl Clone for MockConnection {
272    fn clone(&self) -> Self {
273        Self {
274            peer_id: self.peer_id,
275            mtu: AtomicU16::new(self.mtu.load(Ordering::SeqCst)),
276            phy: self.phy,
277            rssi: AtomicI8::new(self.rssi.load(Ordering::SeqCst)),
278            alive: self.alive.clone(),
279            established_at: self.established_at,
280        }
281    }
282}
283
284impl MockConnection {
285    /// Create a new mock connection
286    pub fn new(peer_id: NodeId, mtu: u16, phy: BlePhy) -> Self {
287        Self {
288            peer_id,
289            mtu: AtomicU16::new(mtu),
290            phy,
291            rssi: AtomicI8::new(-50), // Default RSSI
292            alive: Arc::new(AtomicBool::new(true)),
293            established_at: Instant::now(),
294        }
295    }
296
297    /// Kill this connection
298    pub fn kill(&self) {
299        self.alive.store(false, Ordering::SeqCst);
300    }
301
302    /// Set RSSI value
303    pub fn set_rssi(&self, rssi: i8) {
304        self.rssi.store(rssi, Ordering::SeqCst);
305    }
306
307    /// Set MTU value
308    pub fn set_mtu(&self, mtu: u16) {
309        self.mtu.store(mtu, Ordering::SeqCst);
310    }
311}
312
313impl BleConnection for MockConnection {
314    fn peer_id(&self) -> &NodeId {
315        &self.peer_id
316    }
317
318    fn is_alive(&self) -> bool {
319        self.alive.load(Ordering::SeqCst)
320    }
321
322    fn mtu(&self) -> u16 {
323        self.mtu.load(Ordering::SeqCst)
324    }
325
326    fn phy(&self) -> BlePhy {
327        self.phy
328    }
329
330    fn rssi(&self) -> Option<i8> {
331        Some(self.rssi.load(Ordering::SeqCst))
332    }
333
334    fn connected_duration(&self) -> Duration {
335        self.established_at.elapsed()
336    }
337}
338
339/// Configuration for mock adapter behavior
340#[derive(Clone, Debug)]
341pub struct MockAdapterConfig {
342    /// Simulate connection failures (0.0 = never, 1.0 = always)
343    pub connection_failure_rate: f32,
344    /// Simulated connection latency
345    pub connection_latency: Duration,
346    /// Simulated scan latency before discovering devices
347    pub scan_latency: Duration,
348    /// Support Coded PHY
349    pub supports_coded_phy: bool,
350    /// Support extended advertising
351    pub supports_extended_advertising: bool,
352    /// Maximum MTU
353    pub max_mtu: u16,
354    /// Maximum connections
355    pub max_connections: u8,
356}
357
358impl Default for MockAdapterConfig {
359    fn default() -> Self {
360        Self {
361            connection_failure_rate: 0.0,
362            connection_latency: Duration::from_millis(50),
363            scan_latency: Duration::from_millis(10),
364            supports_coded_phy: true,
365            supports_extended_advertising: true,
366            max_mtu: 517,
367            max_connections: 8,
368        }
369    }
370}
371
372/// Mock BLE adapter for testing
373///
374/// Provides a fully simulated BLE adapter that can be used in unit tests
375/// without requiring actual BLE hardware.
376pub struct MockBleAdapter {
377    node_id: NodeId,
378    network: MockNetwork,
379    config: MockAdapterConfig,
380    powered: AtomicBool,
381    scanning: AtomicBool,
382    advertising: AtomicBool,
383    address: String,
384    discovery_callback: Mutex<Option<DiscoveryCallback>>,
385    connection_callback: Mutex<Option<ConnectionCallback>>,
386    connections: RwLock<HashMap<NodeId, Arc<MockConnection>>>,
387    /// Events recorded for test assertions
388    events: Mutex<Vec<MockEvent>>,
389}
390
391/// Events recorded by the mock adapter for test assertions
392#[derive(Clone, Debug)]
393pub enum MockEvent {
394    /// Adapter was initialized
395    Initialized,
396    /// Adapter was started
397    Started,
398    /// Adapter was stopped
399    Stopped,
400    /// Scanning for devices started
401    ScanStarted,
402    /// Scanning stopped
403    ScanStopped,
404    /// Advertising started
405    AdvertisingStarted,
406    /// Advertising stopped
407    AdvertisingStopped,
408    /// Connected to a peer
409    Connected(NodeId),
410    /// Disconnected from a peer
411    Disconnected(NodeId, DisconnectReason),
412    /// GATT service was registered
413    GattServiceRegistered,
414    /// GATT service was unregistered
415    GattServiceUnregistered,
416}
417
418impl MockBleAdapter {
419    /// Create a new mock adapter with default configuration
420    pub fn new(node_id: NodeId, network: MockNetwork) -> Self {
421        Self::with_config(node_id, network, MockAdapterConfig::default())
422    }
423
424    /// Create a new mock adapter with custom configuration
425    pub fn with_config(node_id: NodeId, network: MockNetwork, config: MockAdapterConfig) -> Self {
426        let address = format!(
427            "00:11:22:{:02X}:{:02X}:{:02X}",
428            (node_id.as_u32() >> 16) & 0xFF,
429            (node_id.as_u32() >> 8) & 0xFF,
430            node_id.as_u32() & 0xFF
431        );
432        Self {
433            node_id,
434            network,
435            config,
436            powered: AtomicBool::new(false),
437            scanning: AtomicBool::new(false),
438            advertising: AtomicBool::new(false),
439            address,
440            discovery_callback: Mutex::new(None),
441            connection_callback: Mutex::new(None),
442            connections: RwLock::new(HashMap::new()),
443            events: Mutex::new(Vec::new()),
444        }
445    }
446
447    /// Get recorded events for test assertions
448    pub fn events(&self) -> Vec<MockEvent> {
449        self.events.lock().unwrap().clone()
450    }
451
452    /// Clear recorded events
453    pub fn clear_events(&self) {
454        self.events.lock().unwrap().clear();
455    }
456
457    /// Record an event
458    fn record_event(&self, event: MockEvent) {
459        self.events.lock().unwrap().push(event);
460    }
461
462    /// Trigger discovery of nearby nodes
463    ///
464    /// Call this in tests to simulate device discovery.
465    pub fn trigger_discovery(&self) {
466        let devices = self.network.discover_nodes(&self.node_id);
467        if let Some(ref callback) = *self.discovery_callback.lock().unwrap() {
468            for device in devices {
469                callback(device);
470            }
471        }
472    }
473
474    /// Simulate receiving data from a peer
475    ///
476    /// Call this in tests to inject data as if received over BLE.
477    pub fn inject_data(&self, from: &NodeId, data: Vec<u8>) {
478        if let Some(ref callback) = *self.connection_callback.lock().unwrap() {
479            callback(*from, ConnectionEvent::DataReceived { data });
480        }
481    }
482
483    /// Simulate a peer disconnecting
484    pub fn simulate_disconnect(&self, peer_id: &NodeId, reason: DisconnectReason) {
485        // Remove from our connections
486        {
487            let mut conns = self.connections.write().unwrap();
488            if let Some(conn) = conns.remove(peer_id) {
489                conn.kill();
490            }
491        }
492
493        // Disconnect from network
494        self.network.disconnect(&self.node_id, peer_id);
495
496        // Notify callback
497        if let Some(ref callback) = *self.connection_callback.lock().unwrap() {
498            callback(*peer_id, ConnectionEvent::Disconnected { reason });
499        }
500
501        self.record_event(MockEvent::Disconnected(*peer_id, reason));
502    }
503
504    /// Get the node ID
505    pub fn node_id(&self) -> &NodeId {
506        &self.node_id
507    }
508
509    /// Check if scanning
510    pub fn is_scanning(&self) -> bool {
511        self.scanning.load(Ordering::SeqCst)
512    }
513
514    /// Check if advertising
515    pub fn is_advertising(&self) -> bool {
516        self.advertising.load(Ordering::SeqCst)
517    }
518}
519
520#[async_trait]
521impl BleAdapter for MockBleAdapter {
522    async fn init(&mut self, _config: &BleConfig) -> Result<()> {
523        self.powered.store(true, Ordering::SeqCst);
524        self.record_event(MockEvent::Initialized);
525        Ok(())
526    }
527
528    async fn start(&self) -> Result<()> {
529        self.record_event(MockEvent::Started);
530        Ok(())
531    }
532
533    async fn stop(&self) -> Result<()> {
534        self.scanning.store(false, Ordering::SeqCst);
535        self.advertising.store(false, Ordering::SeqCst);
536        self.network.stop_advertising(&self.node_id);
537        self.record_event(MockEvent::Stopped);
538        Ok(())
539    }
540
541    fn is_powered(&self) -> bool {
542        self.powered.load(Ordering::SeqCst)
543    }
544
545    fn address(&self) -> Option<String> {
546        Some(self.address.clone())
547    }
548
549    async fn start_scan(&self, _config: &DiscoveryConfig) -> Result<()> {
550        self.scanning.store(true, Ordering::SeqCst);
551        self.record_event(MockEvent::ScanStarted);
552
553        // Optionally auto-discover after scan latency
554        // In real tests, call trigger_discovery() manually for more control
555
556        Ok(())
557    }
558
559    async fn stop_scan(&self) -> Result<()> {
560        self.scanning.store(false, Ordering::SeqCst);
561        self.record_event(MockEvent::ScanStopped);
562        Ok(())
563    }
564
565    async fn start_advertising(&self, _config: &DiscoveryConfig) -> Result<()> {
566        self.advertising.store(true, Ordering::SeqCst);
567        self.network
568            .start_advertising(self.node_id, &self.address, Some("HIVE"));
569        self.record_event(MockEvent::AdvertisingStarted);
570        Ok(())
571    }
572
573    async fn stop_advertising(&self) -> Result<()> {
574        self.advertising.store(false, Ordering::SeqCst);
575        self.network.stop_advertising(&self.node_id);
576        self.record_event(MockEvent::AdvertisingStopped);
577        Ok(())
578    }
579
580    fn set_discovery_callback(&mut self, callback: Option<DiscoveryCallback>) {
581        *self.discovery_callback.lock().unwrap() = callback;
582    }
583
584    async fn connect(&self, peer_id: &NodeId) -> Result<Box<dyn BleConnection>> {
585        // Check connection limit
586        if self.connections.read().unwrap().len() >= self.config.max_connections as usize {
587            return Err(BleError::ConnectionFailed(
588                "Maximum connections reached".to_string(),
589            ));
590        }
591
592        // Note: connection_latency is available in config for tests that want to
593        // add delays, but we don't block by default in the mock
594
595        // Establish connection via network
596        self.network.connect(&self.node_id, peer_id)?;
597
598        // Create connection object
599        let conn = Arc::new(MockConnection::new(
600            *peer_id,
601            self.config.max_mtu,
602            BlePhy::Le1M,
603        ));
604
605        // Store connection
606        {
607            let mut conns = self.connections.write().unwrap();
608            conns.insert(*peer_id, conn.clone());
609        }
610
611        // Notify callback
612        if let Some(ref callback) = *self.connection_callback.lock().unwrap() {
613            callback(
614                *peer_id,
615                ConnectionEvent::Connected {
616                    mtu: conn.mtu(),
617                    phy: conn.phy(),
618                },
619            );
620        }
621
622        self.record_event(MockEvent::Connected(*peer_id));
623        Ok(Box::new(conn.as_ref().clone()))
624    }
625
626    async fn disconnect(&self, peer_id: &NodeId) -> Result<()> {
627        self.simulate_disconnect(peer_id, DisconnectReason::LocalRequest);
628        Ok(())
629    }
630
631    fn get_connection(&self, peer_id: &NodeId) -> Option<Box<dyn BleConnection>> {
632        let conns = self.connections.read().unwrap();
633        conns
634            .get(peer_id)
635            .filter(|c| c.is_alive())
636            .map(|c| Box::new(c.as_ref().clone()) as Box<dyn BleConnection>)
637    }
638
639    fn peer_count(&self) -> usize {
640        self.connections
641            .read()
642            .unwrap()
643            .values()
644            .filter(|c| c.is_alive())
645            .count()
646    }
647
648    fn connected_peers(&self) -> Vec<NodeId> {
649        self.connections
650            .read()
651            .unwrap()
652            .iter()
653            .filter(|(_, c)| c.is_alive())
654            .map(|(id, _)| *id)
655            .collect()
656    }
657
658    fn set_connection_callback(&mut self, callback: Option<ConnectionCallback>) {
659        *self.connection_callback.lock().unwrap() = callback;
660    }
661
662    async fn register_gatt_service(&self) -> Result<()> {
663        self.record_event(MockEvent::GattServiceRegistered);
664        Ok(())
665    }
666
667    async fn unregister_gatt_service(&self) -> Result<()> {
668        self.record_event(MockEvent::GattServiceUnregistered);
669        Ok(())
670    }
671
672    fn supports_coded_phy(&self) -> bool {
673        self.config.supports_coded_phy
674    }
675
676    fn supports_extended_advertising(&self) -> bool {
677        self.config.supports_extended_advertising
678    }
679
680    fn max_mtu(&self) -> u16 {
681        self.config.max_mtu
682    }
683
684    fn max_connections(&self) -> u8 {
685        self.config.max_connections
686    }
687}
688
689#[cfg(test)]
690mod tests {
691    use super::*;
692
693    #[tokio::test]
694    async fn test_mock_adapter_init() {
695        let network = MockNetwork::new();
696        let mut adapter = MockBleAdapter::new(NodeId::new(0x111), network);
697
698        assert!(!adapter.is_powered());
699        adapter.init(&BleConfig::default()).await.unwrap();
700        assert!(adapter.is_powered());
701
702        let events = adapter.events();
703        assert!(matches!(events[0], MockEvent::Initialized));
704    }
705
706    #[tokio::test]
707    async fn test_mock_network_discovery() {
708        let network = MockNetwork::new();
709
710        let mut adapter1 = MockBleAdapter::new(NodeId::new(0x111), network.clone());
711        let mut adapter2 = MockBleAdapter::new(NodeId::new(0x222), network.clone());
712
713        adapter1.init(&BleConfig::default()).await.unwrap();
714        adapter2.init(&BleConfig::default()).await.unwrap();
715
716        // Start advertising on adapter2
717        adapter2
718            .start_advertising(&DiscoveryConfig::default())
719            .await
720            .unwrap();
721
722        // Discover from adapter1
723        let devices = network.discover_nodes(&NodeId::new(0x111));
724        assert_eq!(devices.len(), 1);
725        assert_eq!(devices[0].node_id, Some(NodeId::new(0x222)));
726    }
727
728    #[tokio::test]
729    async fn test_mock_connection() {
730        let network = MockNetwork::new();
731
732        let mut adapter1 = MockBleAdapter::new(NodeId::new(0x111), network.clone());
733        let mut adapter2 = MockBleAdapter::new(NodeId::new(0x222), network.clone());
734
735        adapter1.init(&BleConfig::default()).await.unwrap();
736        adapter2.init(&BleConfig::default()).await.unwrap();
737
738        // Adapter2 must be advertising to accept connections
739        adapter2
740            .start_advertising(&DiscoveryConfig::default())
741            .await
742            .unwrap();
743
744        // Connect adapter1 to adapter2
745        let conn = adapter1.connect(&NodeId::new(0x222)).await.unwrap();
746        assert!(conn.is_alive());
747        assert_eq!(conn.peer_id(), &NodeId::new(0x222));
748
749        // Verify connection tracking
750        assert_eq!(adapter1.peer_count(), 1);
751        assert!(adapter1.connected_peers().contains(&NodeId::new(0x222)));
752    }
753
754    #[tokio::test]
755    async fn test_mock_disconnect() {
756        let network = MockNetwork::new();
757
758        let mut adapter1 = MockBleAdapter::new(NodeId::new(0x111), network.clone());
759        let mut adapter2 = MockBleAdapter::new(NodeId::new(0x222), network.clone());
760
761        adapter1.init(&BleConfig::default()).await.unwrap();
762        adapter2.init(&BleConfig::default()).await.unwrap();
763        adapter2
764            .start_advertising(&DiscoveryConfig::default())
765            .await
766            .unwrap();
767
768        let conn = adapter1.connect(&NodeId::new(0x222)).await.unwrap();
769        assert!(conn.is_alive());
770
771        // Disconnect
772        adapter1.disconnect(&NodeId::new(0x222)).await.unwrap();
773        assert_eq!(adapter1.peer_count(), 0);
774    }
775
776    #[tokio::test]
777    async fn test_connection_limit() {
778        let network = MockNetwork::new();
779
780        let config = MockAdapterConfig {
781            max_connections: 2,
782            ..Default::default()
783        };
784        let mut adapter1 = MockBleAdapter::with_config(NodeId::new(0x111), network.clone(), config);
785        adapter1.init(&BleConfig::default()).await.unwrap();
786
787        // Create 3 other adapters
788        for i in 2..=4 {
789            let mut other = MockBleAdapter::new(NodeId::new(i * 0x111), network.clone());
790            other.init(&BleConfig::default()).await.unwrap();
791            other
792                .start_advertising(&DiscoveryConfig::default())
793                .await
794                .unwrap();
795        }
796
797        // First two connections should succeed
798        adapter1.connect(&NodeId::new(0x222)).await.unwrap();
799        adapter1.connect(&NodeId::new(0x333)).await.unwrap();
800
801        // Third should fail
802        let result = adapter1.connect(&NodeId::new(0x444)).await;
803        assert!(result.is_err());
804    }
805
806    #[tokio::test]
807    async fn test_event_tracking() {
808        let network = MockNetwork::new();
809        let mut adapter = MockBleAdapter::new(NodeId::new(0x111), network.clone());
810
811        adapter.init(&BleConfig::default()).await.unwrap();
812        adapter.start().await.unwrap();
813        adapter
814            .start_scan(&DiscoveryConfig::default())
815            .await
816            .unwrap();
817        adapter.stop_scan().await.unwrap();
818        adapter
819            .start_advertising(&DiscoveryConfig::default())
820            .await
821            .unwrap();
822        adapter.stop_advertising().await.unwrap();
823        adapter.stop().await.unwrap();
824
825        let events = adapter.events();
826        assert!(matches!(events[0], MockEvent::Initialized));
827        assert!(matches!(events[1], MockEvent::Started));
828        assert!(matches!(events[2], MockEvent::ScanStarted));
829        assert!(matches!(events[3], MockEvent::ScanStopped));
830        assert!(matches!(events[4], MockEvent::AdvertisingStarted));
831        assert!(matches!(events[5], MockEvent::AdvertisingStopped));
832        assert!(matches!(events[6], MockEvent::Stopped));
833    }
834
835    #[tokio::test]
836    async fn test_data_injection() {
837        let network = MockNetwork::new();
838        let mut adapter = MockBleAdapter::new(NodeId::new(0x111), network.clone());
839        adapter.init(&BleConfig::default()).await.unwrap();
840
841        // Track received data
842        let received = Arc::new(Mutex::new(Vec::new()));
843        let received_clone = received.clone();
844
845        adapter.set_connection_callback(Some(Arc::new(move |node_id, event| {
846            if let ConnectionEvent::DataReceived { data } = event {
847                received_clone.lock().unwrap().push((node_id, data));
848            }
849        })));
850
851        // Inject data
852        adapter.inject_data(&NodeId::new(0x222), vec![1, 2, 3, 4]);
853
854        let data = received.lock().unwrap();
855        assert_eq!(data.len(), 1);
856        assert_eq!(data[0].0, NodeId::new(0x222));
857        assert_eq!(data[0].1, vec![1, 2, 3, 4]);
858    }
859}
hive_btle/platform/mock.rs

hive_btle/platform/
mock.rs
