[−]Struct gio::IOStreamSpliceFlags
Methods
impl IOStreamSpliceFlags
pub const NONE: IOStreamSpliceFlags
pub const CLOSE_STREAM1: IOStreamSpliceFlags
pub const CLOSE_STREAM2: IOStreamSpliceFlags
pub const WAIT_FOR_BOTH: IOStreamSpliceFlags
pub fn empty() -> IOStreamSpliceFlags
Returns an empty set of flags.
pub fn all() -> IOStreamSpliceFlags
Returns the set containing all flags.
pub fn bits(&self) -> u32
Returns the raw value of the flags currently stored.
pub fn from_bits(bits: u32) -> Option<IOStreamSpliceFlags>
Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.
pub fn from_bits_truncate(bits: u32) -> IOStreamSpliceFlags
Convert from underlying bit representation, dropping any bits that do not correspond to flags.
pub fn is_empty(&self) -> bool
Returns true
if no flags are currently stored.
pub fn is_all(&self) -> bool
Returns true
if all flags are currently set.
pub fn intersects(&self, other: IOStreamSpliceFlags) -> bool
Returns true
if there are flags common to both self
and other
.
pub fn contains(&self, other: IOStreamSpliceFlags) -> bool
Returns true
all of the flags in other
are contained within self
.
pub fn insert(&mut self, other: IOStreamSpliceFlags)
Inserts the specified flags in-place.
pub fn remove(&mut self, other: IOStreamSpliceFlags)
Removes the specified flags in-place.
pub fn toggle(&mut self, other: IOStreamSpliceFlags)
Toggles the specified flags in-place.
pub fn set(&mut self, other: IOStreamSpliceFlags, value: bool)
Inserts or removes the specified flags depending on the passed value.
Trait Implementations
impl PartialEq<IOStreamSpliceFlags> for IOStreamSpliceFlags
fn eq(&self, other: &IOStreamSpliceFlags) -> bool
fn ne(&self, other: &IOStreamSpliceFlags) -> bool
impl Ord for IOStreamSpliceFlags
fn cmp(&self, other: &IOStreamSpliceFlags) -> Ordering
fn max(self, other: Self) -> Self
1.21.0[src]
Compares and returns the maximum of two values. Read more
fn min(self, other: Self) -> Self
1.21.0[src]
Compares and returns the minimum of two values. Read more
impl Clone for IOStreamSpliceFlags
fn clone(&self) -> IOStreamSpliceFlags
fn clone_from(&mut self, source: &Self)
1.0.0[src]
Performs copy-assignment from source
. Read more
impl Extend<IOStreamSpliceFlags> for IOStreamSpliceFlags
fn extend<T: IntoIterator<Item = IOStreamSpliceFlags>>(&mut self, iterator: T)
impl Eq for IOStreamSpliceFlags
impl Copy for IOStreamSpliceFlags
impl PartialOrd<IOStreamSpliceFlags> for IOStreamSpliceFlags
fn partial_cmp(&self, other: &IOStreamSpliceFlags) -> Option<Ordering>
fn lt(&self, other: &IOStreamSpliceFlags) -> bool
fn le(&self, other: &IOStreamSpliceFlags) -> bool
fn gt(&self, other: &IOStreamSpliceFlags) -> bool
fn ge(&self, other: &IOStreamSpliceFlags) -> bool
impl Hash for IOStreamSpliceFlags
fn hash<__H: Hasher>(&self, state: &mut __H)
fn hash_slice<H>(data: &[Self], state: &mut H) where
H: Hasher,
1.3.0[src]
H: Hasher,
Feeds a slice of this type into the given [Hasher
]. Read more
impl Sub<IOStreamSpliceFlags> for IOStreamSpliceFlags
type Output = IOStreamSpliceFlags
The resulting type after applying the -
operator.
fn sub(self, other: IOStreamSpliceFlags) -> IOStreamSpliceFlags
Returns the set difference of the two sets of flags.
impl SubAssign<IOStreamSpliceFlags> for IOStreamSpliceFlags
fn sub_assign(&mut self, other: IOStreamSpliceFlags)
Disables all flags enabled in the set.
impl Not for IOStreamSpliceFlags
type Output = IOStreamSpliceFlags
The resulting type after applying the !
operator.
fn not(self) -> IOStreamSpliceFlags
Returns the complement of this set of flags.
impl BitAnd<IOStreamSpliceFlags> for IOStreamSpliceFlags
type Output = IOStreamSpliceFlags
The resulting type after applying the &
operator.
fn bitand(self, other: IOStreamSpliceFlags) -> IOStreamSpliceFlags
Returns the intersection between the two sets of flags.
impl BitOr<IOStreamSpliceFlags> for IOStreamSpliceFlags
type Output = IOStreamSpliceFlags
The resulting type after applying the |
operator.
fn bitor(self, other: IOStreamSpliceFlags) -> IOStreamSpliceFlags
Returns the union of the two sets of flags.
impl BitXor<IOStreamSpliceFlags> for IOStreamSpliceFlags
type Output = IOStreamSpliceFlags
The resulting type after applying the ^
operator.
fn bitxor(self, other: IOStreamSpliceFlags) -> IOStreamSpliceFlags
Returns the left flags, but with all the right flags toggled.
impl BitAndAssign<IOStreamSpliceFlags> for IOStreamSpliceFlags
fn bitand_assign(&mut self, other: IOStreamSpliceFlags)
Disables all flags disabled in the set.
impl BitOrAssign<IOStreamSpliceFlags> for IOStreamSpliceFlags
fn bitor_assign(&mut self, other: IOStreamSpliceFlags)
Adds the set of flags.
impl BitXorAssign<IOStreamSpliceFlags> for IOStreamSpliceFlags
fn bitxor_assign(&mut self, other: IOStreamSpliceFlags)
Toggles the set of flags.
impl FromIterator<IOStreamSpliceFlags> for IOStreamSpliceFlags
fn from_iter<T: IntoIterator<Item = IOStreamSpliceFlags>>(
iterator: T
) -> IOStreamSpliceFlags
iterator: T
) -> IOStreamSpliceFlags
impl Debug for IOStreamSpliceFlags
impl Octal for IOStreamSpliceFlags
impl Binary for IOStreamSpliceFlags
impl LowerHex for IOStreamSpliceFlags
impl UpperHex for IOStreamSpliceFlags
impl StaticType for IOStreamSpliceFlags
[src]
fn static_type() -> Type
[src]
impl<'a> FromValueOptional<'a> for IOStreamSpliceFlags
[src]
unsafe fn from_value_optional(value: &Value) -> Option<Self>
[src]
impl SetValue for IOStreamSpliceFlags
[src]
impl<'a> FromValue<'a> for IOStreamSpliceFlags
[src]
unsafe fn from_value(value: &Value) -> Self
[src]
Auto Trait Implementations
impl Send for IOStreamSpliceFlags
impl Sync for IOStreamSpliceFlags
Blanket Implementations
impl<T> From for T
[src]
impl<T, U> Into for T where
U: From<T>,
[src]
U: From<T>,
impl<T> ToOwned for T where
T: Clone,
[src]
T: Clone,
impl<T, U> TryFrom for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = !
try_from
)The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T> Borrow for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
try_from
)The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<T> ToValue for T where
T: SetValue + ?Sized,
[src]
T: SetValue + ?Sized,
impl<T> ToSendValue for T where
T: ToValue + SetValue + Send + ?Sized,
[src]
T: ToValue + SetValue + Send + ?Sized,