Struct gd32f1x0_hal::gpio::gpiob::PB8

source · [−]

pub struct PB8<MODE> { /* private fields */ }

Implementations

source

pub fn into_floating_input(self, config: &mut Config) -> PB8<Input<Floating>>

Configures the pin to operate as a floating input.

source

pub fn into_pull_up_input(self, config: &mut Config) -> PB8<Input<PullUp>>

Configures the pin to operate as a pulled down input.

source

pub fn into_pull_down_input(self, config: &mut Config) -> PB8<Input<PullDown>>

Configures the pin to operate as a pulled down input.

source

pub fn into_analog(self, config: &mut Config) -> PB8<Analog>

Configures the pin to operate as an analog input or output.

source

pub fn into_open_drain_output(
self,
config: &mut Config
) -> PB8<Output<OpenDrain>>

Configures the pin to operate as an open drain output.

source

pub fn into_push_pull_output(self, config: &mut Config) -> PB8<Output<PushPull>>

Configures the pin to operate as an open drain output.

source

pub fn downgrade(self) -> Pin<MODE>

Erases the pin number and port from the type.

source

impl<MODE> PB8<Output<MODE>>

source

pub fn set_speed(&mut self, config: &mut Config, speed: Speed)

Configures the max slew rate of the pin

source

impl<MODE> PB8<MODE> where
MODE: Active,

source

pub fn into_alternate<AFN: AF>(
    self,
    config: &mut Config,
    pull_mode: PullMode,
    output_mode: OutputMode
) -> PB8<Alternate<AFN>>

Configures the pin to operate as an alternate function.

source

impl<AFN> PB8<Alternate<AFN>>

source

pub fn set_speed(&mut self, config: &mut Config, speed: Speed)

Configures the max slew rate of the pin

Trait Implementations

source

impl<MODE> InputPin for PB8<Input<MODE>>

type Error = Infallible

Error type

source

fn is_high(&self) -> Result<bool, Self::Error>

Is the input pin high?

source

fn is_low(&self) -> Result<bool, Self::Error>

Is the input pin low?

source

impl InputPin for PB8<Output<OpenDrain>>

type Error = Infallible

Error type

source

fn is_high(&self) -> Result<bool, Self::Error>

Is the input pin high?

source

fn is_low(&self) -> Result<bool, Self::Error>

Is the input pin low?

source

impl<MODE> OutputPin for PB8<Output<MODE>>

type Error = Infallible

Error type

source

fn set_high(&mut self) -> Result<(), Self::Error>

Drives the pin high Read more

source

fn set_low(&mut self) -> Result<(), Self::Error>

Drives the pin low Read more

source

fn set_state(&mut self, state: PinState) -> Result<(), Self::Error>

Drives the pin high or low depending on the provided value Read more

source

impl<MODE> StatefulOutputPin for PB8<Output<MODE>>

source

fn is_set_high(&self) -> Result<bool, Self::Error>

Is the pin in drive high mode? Read more

source

fn is_set_low(&self) -> Result<bool, Self::Error>

Is the pin in drive low mode? Read more

source

impl<MODE> Default for PB8<Output<MODE>>

source

impl SclPin<I2C0> for PB8<Alternate<AF1>>

Auto Trait Implementations

impl<MODE> RefUnwindSafe for PB8<MODE> where
MODE: RefUnwindSafe,

impl<MODE> Send for PB8<MODE> where
MODE: Send,

impl<MODE> Sync for PB8<MODE> where
MODE: Sync,

impl<MODE> Unpin for PB8<MODE> where
MODE: Unpin,

impl<MODE> UnwindSafe for PB8<MODE> where
MODE: UnwindSafe,

Blanket Implementations

source

impl<T> Any for T where
T: 'static + ?Sized,

source

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

source

impl<T> Borrow<T> for T where
T: ?Sized,

const: unstable · source

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

source

impl<T> BorrowMut<T> for T where
T: ?Sized,

const: unstable · source

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

source

impl<T> From<T> for T

const: unstable · source

fn from(t: T) -> T

Returns the argument unchanged.

source

impl<T, U> Into<U> for T where
U: From<T>,

const: unstable · source

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source

impl<P> ToggleableOutputPin for P where
P: Default,

source

fn toggle(&mut self) -> Result<(), <P as ToggleableOutputPin>::Error>

Toggle pin output

type Error = <P as OutputPin>::Error

Error type

source

impl<T, U> TryFrom<U> for T where
U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

const: unstable · source

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.

source

impl<T, U> TryInto<U> for T where
U: TryFrom<T>,

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.

const: unstable · source

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.

Struct gd32f1x0_hal::gpio::gpiob::PB8

Implementations

impl PB8<Debugger>

pub fn activate(self) -> PB8<Input<Floating>>

impl<MODE> PB8<MODE> where MODE: Active,

pub fn into_floating_input(self, config: &mut Config) -> PB8<Input<Floating>>

pub fn into_pull_up_input(self, config: &mut Config) -> PB8<Input<PullUp>>

pub fn into_pull_down_input(self, config: &mut Config) -> PB8<Input<PullDown>>

pub fn into_analog(self, config: &mut Config) -> PB8<Analog>

pub fn into_open_drain_output( self, config: &mut Config) -> PB8<Output<OpenDrain>>

pub fn into_push_pull_output(self, config: &mut Config) -> PB8<Output<PushPull>>

pub fn downgrade(self) -> Pin<MODE>

impl<MODE> PB8<Output<MODE>>

pub fn set_speed(&mut self, config: &mut Config, speed: Speed)

impl<MODE> PB8<MODE> where MODE: Active,

pub fn into_alternate<AFN: AF>( self, config: &mut Config, pull_mode: PullMode, output_mode: OutputMode) -> PB8<Alternate<AFN>>

impl<AFN> PB8<Alternate<AFN>>

pub fn set_speed(&mut self, config: &mut Config, speed: Speed)

Trait Implementations

impl<MODE> InputPin for PB8<Input<MODE>>

type Error = Infallible

fn is_high(&self) -> Result<bool, Self::Error>

fn is_low(&self) -> Result<bool, Self::Error>

impl InputPin for PB8<Output<OpenDrain>>

type Error = Infallible

fn is_high(&self) -> Result<bool, Self::Error>

fn is_low(&self) -> Result<bool, Self::Error>

impl<MODE> OutputPin for PB8<Output<MODE>>

type Error = Infallible

fn set_high(&mut self) -> Result<(), Self::Error>

fn set_low(&mut self) -> Result<(), Self::Error>

fn set_state(&mut self, state: PinState) -> Result<(), Self::Error>

impl<MODE> StatefulOutputPin for PB8<Output<MODE>>

fn is_set_high(&self) -> Result<bool, Self::Error>

fn is_set_low(&self) -> Result<bool, Self::Error>

impl<MODE> Default for PB8<Output<MODE>>

impl SclPin<I2C0> for PB8<Alternate<AF1>>

Auto Trait Implementations

impl<MODE> RefUnwindSafe for PB8<MODE> where MODE: RefUnwindSafe,

impl<MODE> Send for PB8<MODE> where MODE: Send,

impl<MODE> Sync for PB8<MODE> where MODE: Sync,

impl<MODE> Unpin for PB8<MODE> where MODE: Unpin,

impl<MODE> UnwindSafe for PB8<MODE> where MODE: UnwindSafe,

Blanket Implementations

impl<T> Any for T where T: 'static + ?Sized,

fn type_id(&self) -> TypeId

impl<T> Borrow<T> for T where T: ?Sized,

fn borrow(&self) -> &T

impl<T> BorrowMut<T> for T where T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

impl<T> From<T> for T

fn from(t: T) -> T

impl<T, U> Into<U> for T where U: From<T>,

fn into(self) -> U

impl<P> ToggleableOutputPin for P where P: Default,

fn toggle(&mut self) -> Result<(), <P as ToggleableOutputPin>::Error>

type Error = <P as OutputPin>::Error

impl<T, U> TryFrom<U> for T where U: Into<T>,

type Error = Infallible

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

impl<T, U> TryInto<U> for T where U: TryFrom<T>,

type Error = <U as TryFrom<T>>::Error

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

impl<MODE> PB8<MODE> where
MODE: Active,

pub fn into_open_drain_output(
self,
config: &mut Config
) -> PB8<Output<OpenDrain>>

impl<MODE> PB8<MODE> where
MODE: Active,

pub fn into_alternate<AFN: AF>(
self,
config: &mut Config,
pull_mode: PullMode,
output_mode: OutputMode
) -> PB8<Alternate<AFN>>

impl<MODE> RefUnwindSafe for PB8<MODE> where
MODE: RefUnwindSafe,

impl<MODE> Send for PB8<MODE> where
MODE: Send,

impl<MODE> Sync for PB8<MODE> where
MODE: Sync,

impl<MODE> Unpin for PB8<MODE> where
MODE: Unpin,

impl<MODE> UnwindSafe for PB8<MODE> where
MODE: UnwindSafe,

impl<T> Any for T where
T: 'static + ?Sized,

impl<T> Borrow<T> for T where
T: ?Sized,

impl<T> BorrowMut<T> for T where
T: ?Sized,

impl<T, U> Into<U> for T where
U: From<T>,

impl<P> ToggleableOutputPin for P where
P: Default,

impl<T, U> TryFrom<U> for T where
U: Into<T>,

impl<T, U> TryInto<U> for T where
U: TryFrom<T>,