Expand description
Commands
Structs§
Enums§
- Command
- GC9A01 Commands
- DEPolarity
- Display Enable Polarity (DE Polarity)
- DINV
Mode - Display Inversion Mode Set display inversion mode
- DMMode
- Display Operation Mode Select the display operation mode
- DOTClk
- Display Enable Polarity (DOTCLK Polarity)
- Data2EN
- 2 Data Line Mode 3/4-wire SPI
- Data
FormatMDT DataFormatMDT Set Pixel Data Format in2_data_linemode.- Dbi
- Dbi is the pixel format of MCU interface.
- Dpi
- Dpi is the pixel format select of RGB interface.
- GSMode
- Gate Output Scan Direction Sets the direction of scan by the gate driver in the range determined by SCN [4:0] and NL [4:0]. The scan direction determined by GS = 0 can be reversed by setting GS = 1.
- Logical
- Logical On/Off
- RCMMode
- Polarity Clock Sync
- RIMMode
- RGB Interface Mode Specify the RGB interface mode when the RGB interface is used. These bit should be set before display operation through the RGB interface and should not be set during operation.
- RMMode
- Interface for RAM Access Select the interface to access the GRAM.
- SSMode
- Output Scan Direction
- TEPolarity
- The Tearing Effect output signal pulse polarity
- VCIRe
- External reference voltage Vci or internal reference voltage VCIT
- VddAd
- Voltage level value to output the VCORE level,
- XSpl
- Polarity Clock Sync