frus_widgets/

scroll.rs

//! [`SingleChildScrollView`]: a vertically scrollable container.
//!
//! It occupies a fixed-size viewport; its single child is laid out at free height by
//! the driver, then clipped to the viewport and translated by the scroll offset, which
//! the runtime retains, keyed by identity.

use frus_core::{Insets, Rect, Scene};
use frus_layout::{Dimension, Style};

use crate::interaction::Status;
use crate::physics::ScrollPhysics;
use crate::theme::Theme;
use crate::widget::Widget;

/// A [`SingleChildScrollView`]'s scrolling axis, or axes.
#[derive(Copy, Clone, Debug, PartialEq, Eq)]
pub enum Axis {
    /// Up and down.
    Vertical,
    /// Left and right.
    Horizontal,
    /// Both, which is a **convenience** rather than a third kind of area: a scrollable
    /// elsewhere has one axis and one only, and two of them means one nested inside the
    /// other. This is that pair collapsed into a single node, and a gesture reads it as
    /// the pair: one drag moves one axis, decided by the direction the finger went in and
    /// held to the end of the gesture. A page that scrolls down does not drift sideways
    /// while it does it.
    Both,
}

impl Axis {
    pub(crate) fn free_x(self) -> bool {
        matches!(self, Axis::Horizontal | Axis::Both)
    }
    pub(crate) fn free_y(self) -> bool {
        matches!(self, Axis::Vertical | Axis::Both)
    }
}

/// A scrollable container.
pub struct SingleChildScrollView<Msg = crate::callback::Callback> {
    width: Dimension,
    height: Dimension,
    /// Was the width **set** explicitly? If not, in flex mode the width must not
    /// serve as a basis; see [`SingleChildScrollView::style`].
    width_explicit: bool,
    /// Was the height **set** explicitly? The same question for the vertical axis.
    height_explicit: bool,
    flex_grow: f32,
    axis: Axis,
    /// Edge and fling behaviour, when this area wants one of its own; `None`
    /// follows the application, which follows the platform.
    physics: Option<ScrollPhysics>,
    /// Whether this area draws a scrollbar, when it wants its own answer; `None`
    /// follows the application, which follows the platform.
    scrollbars: Option<crate::physics::Scrollbars>,
    /// Whether the bar stays put instead of fading; `None` lets it fade.
    thumb_visibility: Option<bool>,
    reverse: bool,
    /// Room around the content, inside the viewport; see [`SingleChildScrollView::padding`].
    padding: Insets,
    /// Told where this area is whenever it moves; see [`SingleChildScrollView::on_scroll`].
    on_scroll: Option<Box<dyn Fn(crate::ScrollPosition) -> Msg>>,
    /// How far it must move before it says so again; see
    /// [`SingleChildScrollView::notify_every`].
    grain: f32,
    content: Vec<Box<dyn Widget<Msg>>>,
}

impl<Msg> SingleChildScrollView<Msg> {
    /// Creates a scrollable area, its viewport 200 px tall by default.
    pub fn new() -> Self {
        Self {
            width: Dimension::Auto,
            height: Dimension::Length(200.0),
            width_explicit: false,
            height_explicit: false,
            flex_grow: 0.0,
            axis: Axis::Vertical,
            physics: None,
            scrollbars: None,
            thumb_visibility: None,
            reverse: false,
            padding: Insets::ZERO,
            on_scroll: None,
            grain: 0.0,
            content: Vec::new(),
        }
    }

    /// Chooses the scrolling axis or axes; vertical by default.
    pub fn axis(mut self, axis: Axis) -> Self {
        self.axis = axis;
        self
    }

    /// Scrolls **from the far end**: the content is anchored to the bottom of a
    /// vertical viewport (the right of a horizontal one) and the area starts there.
    ///
    /// It is what a conversation wants. Two things follow from it that nothing else
    /// gives you:
    ///
    /// - content **shorter** than the viewport sits at the bottom rather than the top;
    /// - the area **stays** at the end when content arrives, because offsets are
    ///   measured from the end. A view resting at the newest message goes on resting
    ///   there, however many messages are appended.
    ///
    /// Nothing changes for the user's hand: a finger pushes the content the way it
    /// moves, in either direction, and the scrollbar's thumb rests where the content is.
    pub fn reverse(mut self) -> Self {
        self.reverse = true;
        self
    }

    /// Overrides how this area behaves at its edges and after a fling.
    ///
    /// Left unset, it follows the application's choice, which itself defaults to
    /// what the running platform does — so setting this is for the cases where the
    /// content wants a particular feel, not for making an app feel native.
    pub fn physics(mut self, physics: ScrollPhysics) -> Self {
        self.physics = Some(physics);
        self
    }

    /// **Whether this area draws a scrollbar**, over the application's answer.
    ///
    /// Left unset it follows the application, which itself follows the platform — so
    /// setting this is for the one area that wants a bar where the platform gives none,
    /// or none where it gives one, not for making an app feel native.
    pub fn scrollbars(mut self, scrollbars: crate::physics::Scrollbars) -> Self {
        self.scrollbars = Some(scrollbars);
        self
    }

    /// **Keeps the scrollbar on screen** rather than letting it fade out when this area
    /// stops moving (`scrollbar.dart:214`).
    ///
    /// A bar over content earns its place by going away again; pin it for an area whose
    /// content does not look scrollable, or one a reader should be able to aim at
    /// without scrolling first to make the bar appear.
    pub fn thumb_visibility(mut self, visible: bool) -> Self {
        self.thumb_visibility = Some(visible);
        self
    }

    /// Sets the viewport width, in logical pixels.
    pub fn width(mut self, width: f32) -> Self {
        self.width = Dimension::Length(width);
        self.width_explicit = true;
        self
    }

    /// Sets the viewport height, in logical pixels.
    pub fn height(mut self, height: f32) -> Self {
        self.height = Dimension::Length(height);
        self.height_explicit = true;
        self
    }

    /// Flex growth factor along the parent's main axis.
    pub fn flex(mut self, grow: f32) -> Self {
        self.flex_grow = grow;
        self
    }

    /// Insets the content, **inside** the viewport: the padding scrolls with what it
    /// surrounds rather than shrinking the window onto it.
    ///
    /// That is the whole distinction, and it is the reference's: a scroll area padded at
    /// the bottom has that room *at the end of its content*, reachable only by scrolling
    /// to it, which is what a floating button hovering over the last row needs. Room
    /// taken out of the viewport instead would sit there permanently and the last row
    /// would still slide under the button.
    ///
    /// Along the cross axis it simply insets the content, which stays the width of the
    /// viewport less the two sides.
    ///
    /// ```
    /// # use frus_widgets::SingleChildScrollView;
    /// # let feed = frus_widgets::Container::<()>::new();
    /// SingleChildScrollView::<()>::new().padding_each(0.0, 16.0, 88.0, 16.0).child(feed);
    /// ```
    pub fn padding(mut self, padding: f32) -> Self {
        self.padding = Insets::uniform(padding);
        self
    }

    /// The same, one side at a time.
    pub fn padding_each(mut self, top: f32, right: f32, bottom: f32, left: f32) -> Self {
        self.padding = Insets::new(top, right, bottom, left);
        self
    }

    /// **Says where this area is** whenever it moves — a "back to top" button that
    /// appears once the page has gone down, a rule that fills as it goes, a load-more
    /// when the end comes into view.
    ///
    /// The area has to be reachable by name for a request to come back the other way:
    /// wrap it in `keyed(k, …)` and address `k`, exactly as a focus request does.
    ///
    /// A message per frame while it moves, which is what a bar fading in needs and what
    /// a load-more does not; [`SingleChildScrollView::notify_every`] is for the second.
    pub fn on_scroll<R: crate::callback::IntoMsg<Msg>>(
        mut self,
        on_scroll: impl Fn(crate::ScrollPosition) -> R + 'static,
    ) -> Self {
        self.on_scroll = Some(Box::new(crate::callback::handler1(on_scroll)));
        self
    }

    /// Reports no more often than every `px` of movement — and **always** reports where
    /// it comes to rest, however short the last step was.
    pub fn notify_every(mut self, px: f32) -> Self {
        self.grain = px.max(0.0);
        self
    }

    /// Sets the scrollable content.
    pub fn child(mut self, content: impl Widget<Msg> + 'static) -> Self {
        self.content.clear();
        self.content.push(Box::new(content));
        self
    }
}

impl<Msg> Default for SingleChildScrollView<Msg> {
    fn default() -> Self {
        Self::new()
    }
}

impl<Msg: Clone> Widget<Msg> for SingleChildScrollView<Msg> {
    fn style(&self) -> Style {
        // In **flex** mode (fill then scroll), an axis dimension that was not set
        // explicitly must not serve as a basis: the default height of 200 would
        // otherwise stay a flexible basis and the viewport would not fill the parent's
        // remaining space — it would take `+200` of free room to grow. So we set it to
        // `Auto`, a basis of 0, and let `flex_grow` **fill**.
        let filling = self.flex_grow > 0.0;
        let height = if filling && !self.height_explicit && self.axis.free_y() {
            Dimension::Auto
        } else {
            self.height
        };
        let width = if filling && !self.width_explicit && self.axis.free_x() {
            Dimension::Auto
        } else {
            self.width
        };
        // **A size nobody asked for, on an axis that does not scroll, is not ours to
        // invent.** The 200 is the default *viewport* — the height of a window onto
        // something taller — and it belongs to the axis that scrolls. A horizontal strip
        // took it too, and claimed two hundred pixels for a bar forty-eight tall (#65).
        // `Auto` here is the signal the layout reads to size this axis from the content;
        // see the scroll branch of `build_layout_scoped`.
        let height = if !self.height_explicit && !self.axis.free_y() {
            Dimension::Auto
        } else {
            height
        };
        let width = if !self.width_explicit && !self.axis.free_x() {
            Dimension::Auto
        } else {
            width
        };
        Style {
            width,
            height,
            flex_grow: self.flex_grow,
            ..Default::default()
        }
    }

    fn children(&self) -> &[Box<dyn Widget<Msg>>] {
        &self.content
    }

    fn paint(&self, _bounds: Rect, _status: Status, _theme: &Theme, _scene: &mut Scene) {
        // The viewport itself is transparent: only the content is drawn.
    }

    fn on_click(&self) -> Option<Msg> {
        None
    }

    fn scrollbars(&self) -> Option<crate::physics::Scrollbars> {
        self.scrollbars
    }

    fn thumb_visibility(&self) -> Option<bool> {
        self.thumb_visibility
    }

    fn scroll_content(&self) -> Option<&dyn Widget<Msg>> {
        self.content.first().map(|child| child.as_ref())
    }

    fn scroll_axis(&self) -> Axis {
        self.axis
    }

    fn scroll_physics(&self) -> Option<ScrollPhysics> {
        self.physics
    }

    fn scroll_reverse(&self) -> bool {
        self.reverse
    }

    fn scroll_padding(&self) -> Insets {
        self.padding
    }

    fn on_scroll(&self, position: crate::ScrollPosition) -> Option<Msg> {
        self.on_scroll.as_ref().map(|report| report(position))
    }

    fn scroll_grain(&self) -> f32 {
        self.grain
    }
}

#[cfg(test)]
mod tests {
    use super::*;
    use crate::{build_ui, Container, Runtime, Size};
    use frus_core::{Color, Primitive};

    const MARK: Color = Color::rgb(1.0, 0.0, 0.0);

    /// **A viewport is as big as its content on the axis it does not scroll.**
    ///
    /// The two hundred pixel default is the height of a *window onto something taller*, and
    /// it belongs to the axis that scrolls. A horizontal area took it as well, which is how
    /// a tab bar forty-eight pixels tall came to claim two hundred and push its panel down
    /// the page (#65).
    ///
    /// It cannot be answered by this widget alone: a scroll host lays its content out
    /// against the viewport on the axis that does not scroll, so an `Auto` here would hand
    /// the content nothing and get nothing back. `Auto` is the *signal*; the measurement
    /// happens in the layout, where the content can be laid out on its own first.
    #[test]
    fn a_viewport_takes_its_content_s_size_on_the_axis_it_does_not_scroll() {
        let strip = SingleChildScrollView::<()>::new()
            .axis(Axis::Horizontal)
            .child(Container::new().width(900.0).height(48.0).color(MARK));
        let ui = build_ui(
            &strip,
            Size::new(300.0, 400.0),
            &Runtime::default(),
            &Theme::default(),
        );
        let box_ = ui.scene().primitives().iter().find_map(|p| match p {
            Primitive::Rect { rect, .. } => Some(*rect),
            _ => None,
        });
        assert_eq!(
            box_.map(|r| r.height),
            Some(48.0),
            "the strip is its content's height, not the vertical default"
        );

        // And a caller's own number is still a caller's own number.
        let told = SingleChildScrollView::<()>::new()
            .axis(Axis::Horizontal)
            .height(120.0)
            .child(Container::new().width(900.0).height(48.0).color(MARK));
        assert_eq!(
            Widget::<()>::style(&told).height,
            Dimension::Length(120.0),
            "an explicit height is not measured away"
        );
    }

    /// The vertical case of the same rule: an area that scrolls **down** takes its width
    /// from what is in it. In a row it used to come out nothing wide, a leaf's content
    /// being nothing at all.
    #[test]
    fn a_vertical_area_is_as_wide_as_its_content() {
        let row = crate::Flex::<()>::row().child(
            SingleChildScrollView::<()>::new()
                .height(100.0)
                .child(Container::new().width(160.0).height(400.0).color(MARK)),
        );
        let ui = build_ui(
            &row,
            Size::new(400.0, 400.0),
            &Runtime::default(),
            &Theme::default(),
        );
        let drawn = ui.scene().primitives().iter().find_map(|p| match p {
            Primitive::Rect { rect, .. } => Some(*rect),
            _ => None,
        });
        assert_eq!(drawn.map(|r| r.width), Some(160.0));
    }

    /// A scroll 100 tall holding `content_h` of content, at `offset`; returns the
    /// rectangle of the marker drawn at the very end of that content.
    fn last_mark(scroll: SingleChildScrollView<()>, offset: f32) -> Rect {
        let mut runtime = Runtime::default();
        let ui = build_ui(
            &scroll,
            Size::new(100.0, 100.0),
            &runtime,
            &Theme::default(),
        );
        let id = ui.scroll_regions()[0].id;
        runtime.scroll.insert(id, (0.0, offset));
        let ui = build_ui(
            &scroll,
            Size::new(100.0, 100.0),
            &runtime,
            &Theme::default(),
        );
        ui.scene()
            .primitives()
            .iter()
            .filter_map(|p| match p {
                Primitive::Rect { color, rect, .. } if *color == MARK => Some(*rect),
                _ => None,
            })
            .next_back()
            .expect("the marker is painted")
    }

    /// A column of `n` 40 px rows, the last one marked.
    fn content(n: usize) -> Container<()> {
        let mut column = crate::Flex::<()>::column();
        for i in 0..n {
            let colour = if i + 1 == n {
                MARK
            } else {
                Color::rgb(0.0, 0.0, 1.0)
            };
            column = column.child(Container::<()>::new().height(40.0).color(colour));
        }
        Container::<()>::new().child(column)
    }

    /// Content shorter than the viewport sits at the **top** normally and at the
    /// **bottom** reversed — the first of the two things reversing is for.
    #[test]
    fn short_content_sits_at_the_end_when_reversed() {
        let plain = SingleChildScrollView::<()>::new()
            .width(100.0)
            .height(100.0)
            .child(content(1));
        assert_eq!(last_mark(plain, 0.0).y, 0.0, "at the top");

        let reversed = SingleChildScrollView::<()>::new()
            .width(100.0)
            .height(100.0)
            .reverse()
            .child(content(1));
        let r = last_mark(reversed, 0.0);
        assert_eq!(r.y + r.height, 100.0, "against the bottom: {r:?}");
    }

    /// Offset 0 is the **end** of the content when reversed, and it stays the end
    /// however much content there is — which is what keeps a conversation resting on
    /// its newest message as messages arrive.
    #[test]
    fn offset_zero_is_the_end_and_stays_there() {
        for rows in [4, 10, 40] {
            let reversed = SingleChildScrollView::<()>::new()
                .width(100.0)
                .height(100.0)
                .reverse()
                .child(content(rows));
            let r = last_mark(reversed, 0.0);
            assert_eq!(
                r.y + r.height,
                100.0,
                "{rows} rows, still resting at the end: {r:?}"
            );
        }
    }

    /// Scrolling away from zero walks **back** through the content, which is up the
    /// screen for the newest-last layout a reversed view has.
    #[test]
    fn a_positive_offset_moves_back_through_the_content() {
        let scroll = || {
            SingleChildScrollView::<()>::new()
                .width(100.0)
                .height(100.0)
                .reverse()
                .child(content(10))
        };
        let at_rest = last_mark(scroll(), 0.0);
        let scrolled = last_mark(scroll(), 60.0);
        assert_eq!(
            scrolled.y - at_rest.y,
            60.0,
            "the end has moved down and out of view"
        );
    }

    /// The end of the content is the end of the *axis*, so a refusal there glows at the
    /// bottom of a reversed area rather than the top — where a conversation's oldest
    /// message is, and where the user is actually pressing.
    #[test]
    fn the_glow_follows_the_axis_and_not_the_screen() {
        use frus_core::Rect as R;
        let area = |reverse: bool| crate::Scrollable {
            id: crate::WidgetId::ROOT,
            viewport: R::new(0.0, 0.0, 100.0, 100.0),
            max_x: 0.0,
            max_y: 300.0,
            physics: None,
            refresh: None,
            page: None,
            reverse_x: false,
            reverse_y: reverse,
            host: None,
            keep_visible: None,
        };
        // A refusal towards the axis's start (a negative offset).
        assert_eq!(area(false).refused_edge(true, -1.0), crate::GlowEdge::Top);
        assert_eq!(
            area(true).refused_edge(true, -1.0),
            crate::GlowEdge::Bottom,
            "the start of a reversed axis is the bottom of the screen"
        );
        // And a pull-to-refresh listens at whichever of the two that is.
        assert_eq!(area(true).start_edge(true), crate::GlowEdge::Bottom);
    }

    /// The one thing that is *not* reversed: what the user's hand does. A push in a
    /// direction moves the content that way in both, and only the arithmetic between
    /// the push and the number changes sign.
    #[test]
    fn a_push_moves_the_content_the_way_it_pushes() {
        let region = |reverse: bool| {
            let mut s = SingleChildScrollView::<()>::new()
                .width(100.0)
                .height(100.0);
            if reverse {
                s = s.reverse();
            }
            let s = s.child(content(10));
            let ui = build_ui(
                &s,
                Size::new(100.0, 100.0),
                &Runtime::default(),
                &Theme::default(),
            );
            ui.scroll_regions()[0]
        };
        // A finger pushing the content **down** by 10 px.
        assert_eq!(region(false).offset_delta((0.0, 10.0)).1, -10.0);
        assert_eq!(region(true).offset_delta((0.0, 10.0)).1, 10.0);
        // Opposite numbers, and in both cases "the content went down": one counts from
        // the top and the other from the bottom.
    }
}

#[cfg(test)]
mod padding_tests {
    use super::*;
    use crate::{build_ui, Container, Runtime, Size};
    use frus_core::{Color, Primitive};

    const MARK: Color = Color::rgb(1.0, 0.0, 0.0);

    /// The box the content painted.
    fn content_rect(scroll: &SingleChildScrollView<()>) -> Rect {
        build_ui(
            scroll,
            Size::new(100.0, 100.0),
            &Runtime::default(),
            &Theme::default(),
        )
        .scene()
        .primitives()
        .iter()
        .find_map(|p| match p {
            Primitive::Rect { rect, color, .. } if *color == MARK => Some(*rect),
            _ => None,
        })
        .expect("the content is painted")
    }

    fn area(height: f32) -> SingleChildScrollView<()> {
        SingleChildScrollView::<()>::new()
            .width(100.0)
            .height(100.0)
            .child(Container::<()>::new().height(height).color(MARK))
    }

    /// The leading insets move the content in; the sides come off its width, which is
    /// otherwise the viewport's.
    #[test]
    fn the_content_starts_inside_the_insets() {
        let bare = content_rect(&area(50.0));
        assert_eq!((bare.x, bare.y, bare.width), (0.0, 0.0, 100.0));

        let padded = content_rect(&area(50.0).padding_each(12.0, 8.0, 24.0, 8.0));
        assert_eq!((padded.x, padded.y), (8.0, 12.0));
        assert_eq!(padded.width, 84.0, "the sides come off the content");
    }

    /// The room is inside the viewport and scrolls with the content: it joins what there
    /// is to scroll rather than being taken out of the window.
    #[test]
    fn the_far_inset_is_reachable_rather_than_lost() {
        let region = |scroll: &SingleChildScrollView<()>| {
            build_ui(
                scroll,
                Size::new(100.0, 100.0),
                &Runtime::default(),
                &Theme::default(),
            )
            .scroll_regions()[0]
                .max_y
        };
        assert_eq!(
            region(&area(100.0)),
            0.0,
            "exactly fills: nothing to scroll"
        );
        assert_eq!(
            region(&area(100.0).padding_each(12.0, 0.0, 24.0, 0.0)),
            36.0,
            "both insets joined the content"
        );
    }

    /// A reversed area rests at the end, and the end is one bottom inset up.
    #[test]
    fn a_reversed_area_rests_above_its_bottom_inset() {
        let padded = content_rect(&area(50.0).reverse().padding_each(12.0, 0.0, 24.0, 0.0));
        assert_eq!(
            padded.y + padded.height,
            76.0,
            "the content ends one bottom inset above the viewport's edge"
        );
    }
}

/// Milestone 533: content that shrinks under an offset it no longer reaches. Seen on a
/// phone as a row of filters that overflowed at a large text size, was swiped to its end,
/// and stayed swiped — its first label cut at the left, empty room at the right — once the
/// text was small again and the row fitted.
#[cfg(test)]
mod shrunk_content_tests {
    use super::*;
    use crate::{build_ui, Container, ListView, PageView, Runtime, Size, Ui};
    use frus_core::{Color, Primitive};

    const MARK: Color = Color::rgb(1.0, 0.0, 0.0);
    const FRAME: f32 = 1.0 / 60.0;

    /// A strip 100 wide and 40 tall holding one marked box `width` wide: the demo's filter
    /// row, reduced to its geometry.
    fn strip(width: f32) -> SingleChildScrollView<()> {
        SingleChildScrollView::<()>::new()
            .axis(Axis::Horizontal)
            .width(100.0)
            .height(40.0)
            .child(Container::<()>::new().width(width).height(40.0).color(MARK))
    }

    /// A list 200 tall of `count` marked rows, 40 each.
    fn rows(count: usize) -> ListView<()> {
        ListView::<()>::new(count, 40.0, |_| {
            Container::<()>::new().height(40.0).color(MARK)
        })
        .width(100.0)
        .height(200.0)
    }

    fn frame(widget: &dyn Widget<()>, runtime: &Runtime) -> Ui<()> {
        build_ui(widget, Size::new(300.0, 400.0), runtime, &Theme::default())
    }

    /// Every rectangle painted in `color`, in paint order.
    fn painted(ui: &Ui<()>, color: Color) -> Vec<Rect> {
        ui.scene()
            .primitives()
            .iter()
            .filter_map(|p| match p {
                Primitive::Rect { rect, color: c, .. } if *c == color => Some(*rect),
                _ => None,
            })
            .collect()
    }

    /// One turn of the shell's loop over `ui`'s regions.
    fn step(runtime: &mut Runtime, ui: &Ui<()>) {
        let regions = ui.scroll_regions().to_vec();
        runtime.advance_scroll(&regions, ScrollPhysics::Clamping, FRAME);
    }

    /// The phone's report: the row fits again and is drawn from its start, in the frame it
    /// fits — and the runtime keeps it there.
    #[test]
    fn a_row_that_fits_again_is_drawn_from_its_start() {
        let mut runtime = Runtime::default();
        let wide = strip(300.0);
        let id = frame(&wide, &runtime).scroll_regions()[0].id;
        // Swiped to the end, and the swipe has settled: nothing owns the offset now.
        runtime.scroll.insert(id, (200.0, 0.0));
        let ui = frame(&wide, &runtime);
        assert_eq!(painted(&ui, MARK)[0].x, -200.0, "the end of the row shows");
        step(&mut runtime, &ui);

        let narrow = strip(80.0);
        let ui = frame(&narrow, &runtime);
        assert_eq!(ui.scroll_regions()[0].max_x, 0.0, "nothing left to scroll");
        assert_eq!(
            painted(&ui, MARK)[0].x,
            0.0,
            "drawn from its start in the very frame it fits"
        );
        step(&mut runtime, &ui);
        assert_eq!(runtime.scroll.get(&id), Some(&(0.0, 0.0)));
        assert_eq!(painted(&frame(&narrow, &runtime), MARK)[0].x, 0.0);
    }

    /// Shrunk, but still too wide: it rests at its new end, not at its start.
    #[test]
    fn a_row_that_still_overflows_rests_at_its_new_end() {
        let mut runtime = Runtime::default();
        let wide = strip(300.0);
        let id = frame(&wide, &runtime).scroll_regions()[0].id;
        runtime.scroll.insert(id, (200.0, 0.0));
        // A few frames at the end first, so the scrollbar's fade has seen the offset.
        for _ in 0..3 {
            let ui = frame(&wide, &runtime);
            step(&mut runtime, &ui);
        }

        let narrower = strip(150.0);
        let ui = frame(&narrower, &runtime);
        let mark = painted(&ui, MARK)[0];
        assert_eq!(
            (mark.x, mark.x + mark.width),
            (-50.0, 100.0),
            "its last pixel on the viewport's right edge"
        );
        for _ in 0..10 {
            let ui = frame(&narrower, &runtime);
            step(&mut runtime, &ui);
        }
        assert_eq!(runtime.scroll.get(&id), Some(&(50.0, 0.0)));
        // Nothing scrolled: the content changed. A bar that arrived for it would say
        // otherwise.
        assert_eq!(
            runtime.scrollbar_fade_of(id).opacity,
            0.0,
            "no bar summoned"
        );
    }

    /// The same down the screen: a list scrolled to its bottom that loses rows.
    #[test]
    fn a_list_that_loses_rows_keeps_its_last_row_on_the_floor() {
        let mut runtime = Runtime::default();
        let id = frame(&rows(10), &runtime).scroll_regions()[0].id;
        runtime.scroll.insert(id, (0.0, 200.0));

        // Six rows, 240 of content: the bottom is 40 down.
        let ui = frame(&rows(6), &runtime);
        let last = painted(&ui, MARK)
            .into_iter()
            .max_by(|a, b| a.y.total_cmp(&b.y))
            .expect("a row is painted");
        assert_eq!(last.y + last.height, 200.0, "the last row on the floor");
        step(&mut runtime, &ui);
        assert_eq!(runtime.scroll.get(&id), Some(&(0.0, 40.0)));

        // Three rows fit: back to the top.
        let ui = frame(&rows(3), &runtime);
        let first = painted(&ui, MARK)
            .into_iter()
            .min_by(|a, b| a.y.total_cmp(&b.y))
            .expect("a row is painted");
        assert_eq!(first.y, 0.0);
        assert_eq!(painted(&ui, MARK).len(), 3, "every row shows");
        step(&mut runtime, &ui);
        assert_eq!(runtime.scroll.get(&id), Some(&(0.0, 0.0)));
    }

    /// A paged view that loses pages while on its last one shows its new last page.
    #[test]
    fn a_paged_view_that_loses_pages_shows_its_new_last_page() {
        let shade = |index: usize| Color::rgb(0.0, 0.0, (index + 1) as f32 / 10.0);
        let pages = |count: usize| {
            PageView::<()>::new(count, move |index| {
                Container::<()>::new().color(shade(index))
            })
            .width(300.0)
            .height(400.0)
        };
        let mut runtime = Runtime::default();
        let id = frame(&pages(5), &runtime).scroll_regions()[0].id;
        runtime.scroll.insert(id, (1200.0, 0.0));
        assert_eq!(painted(&frame(&pages(5), &runtime), shade(4))[0].x, 0.0);

        let ui = frame(&pages(2), &runtime);
        assert_eq!(
            painted(&ui, shade(1)).first().map(|r| r.x),
            Some(0.0),
            "page 1 fills the viewport"
        );
        assert!(painted(&ui, shade(4)).is_empty(), "no page past the end");
        step(&mut runtime, &ui);
        assert_eq!(runtime.scroll.get(&id), Some(&(300.0, 0.0)));
    }

    /// A reversed strip counts its offset from the right. The range is the same, so the
    /// correction is too — and the content lands against the left edge, not off to the right.
    #[test]
    fn a_reversed_row_is_brought_back_the_same_way() {
        let mut runtime = Runtime::default();
        let wide = strip(300.0).reverse();
        let id = frame(&wide, &runtime).scroll_regions()[0].id;
        runtime.scroll.insert(id, (200.0, 0.0));
        assert_eq!(
            painted(&frame(&wide, &runtime), MARK)[0].x,
            0.0,
            "its start shows"
        );

        let narrower = strip(150.0).reverse();
        let ui = frame(&narrower, &runtime);
        assert_eq!(
            painted(&ui, MARK)[0].x,
            0.0,
            "its start against the left edge: {:?}",
            painted(&ui, MARK)
        );
        step(&mut runtime, &ui);
        assert_eq!(runtime.scroll.get(&id), Some(&(50.0, 0.0)));
    }

    /// A finger owns the offset: the content shrinking under it moves nothing, in the
    /// picture or the runtime, until it lets go — and then the release brings it home.
    #[test]
    fn a_held_row_is_not_yanked_from_under_the_finger() {
        let mut runtime = Runtime::default();
        let wide = strip(300.0);
        let id = frame(&wide, &runtime).scroll_regions()[0].id;
        runtime.scroll.insert(id, (200.0, 0.0));
        runtime.hold_scroll(id);

        let narrower = strip(150.0);
        for _ in 0..10 {
            let ui = frame(&narrower, &runtime);
            assert_eq!(painted(&ui, MARK)[0].x, -200.0, "where the finger left it");
            step(&mut runtime, &ui);
        }
        assert_eq!(runtime.scroll.get(&id), Some(&(200.0, 0.0)));

        runtime.release_scroll(id);
        let area = frame(&narrower, &runtime).scroll_regions()[0];
        assert!(
            runtime.fling_scroll(area, ScrollPhysics::Clamping, (0.0, 0.0)),
            "a release out of range springs"
        );
        for _ in 0..600 {
            let ui = frame(&narrower, &runtime);
            step(&mut runtime, &ui);
        }
        let rest = runtime.scroll.get(&id).copied().unwrap_or_default();
        assert!((rest.0 - 50.0).abs() < 1.0, "home at the new end: {rest:?}");
    }
}