1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180

use crate::time::{Hertz, MegaHertz, Microseconds, Nanoseconds};

use embedded_hal::blocking::delay::{DelayMs, DelayUs};
use embedded_hal::timer::{Cancel, CountDown, Periodic};
use esp8266::{DPORT, TIMER};
use void::Void;

pub trait TimerExt: Sized {
    fn timers(self) -> (Timer1, Timer2) {
        self.with_clock_frequency(MegaHertz(80))
    }

    /// Configure the timer with a non default clock frequency
    fn with_clock_frequency<T>(self, frequency: T) -> (Timer1, Timer2)
    where
        T: Into<Hertz>;
}

impl TimerExt for TIMER {
    fn with_clock_frequency<T>(self, frequency: T) -> (Timer1, Timer2)
    where
        T: Into<Hertz>,
    {
        let frequency: Hertz = frequency.into();
        (Timer1::new(frequency), Timer2::new(frequency))
    }
}

macro_rules! impl_timer {
    ($TIMER:ident: ($ctrl:ident, $load:ident, $alarm:ident, $int:ident, $clr_mask:ident, $load_value:ident)) => {
        pub struct $TIMER {
            ticks_per_ms: u32,
        }

        impl $TIMER {
            fn new<T>(frequency: T) -> Self
            where
                T: Into<Hertz>,
            {
                let timer = unsafe { (&*TIMER::ptr()) };
                timer.$ctrl.write(|w| {
                    w.rollover()
                        .set_bit()
                        .interrupt_type()
                        .level()
                        .prescale_divider()
                        .devided_by_256()
                        .timer_enable()
                        .clear_bit()
                });
                timer.$alarm.write(|w| unsafe { w.bits(0) });
                timer.$int.modify(|_, w| w.$clr_mask().set_bit());

                let frequency: Hertz = frequency.into();
                $TIMER {
                    ticks_per_ms: (1_000_000_000 / (frequency.0 / 256)),
                }
            }
        }

        impl CountDown for $TIMER {
            type Time = Nanoseconds;

            fn start<T>(&mut self, timeout: T)
            where
                T: Into<Nanoseconds>,
            {
                let timer = unsafe { (&*TIMER::ptr()) };
                let timeout: Nanoseconds = timeout.into();

                let ticks = timeout.0 / self.ticks_per_ms;
                timer.$ctrl.modify(|_, w| w.timer_enable().set_bit());
                timer.$load.write(|w| unsafe { w.bits($load_value(ticks)) });
                timer.$int.modify(|_, w| w.$clr_mask().set_bit());
            }

            fn wait(&mut self) -> nb::Result<(), Void> {
                let timer = unsafe { (&*TIMER::ptr()) };
                if timer.$ctrl.read().$int().bit_is_clear() {
                    Err(nb::Error::WouldBlock)
                } else {
                    timer.$int.modify(|_, w| w.$clr_mask().set_bit());
                    Ok(())
                }
            }
        }

        impl Periodic for $TIMER {}

        impl Cancel for $TIMER {
            type Error = Void;

            fn cancel(&mut self) -> Result<(), Self::Error> {
                let timer = unsafe { (&*TIMER::ptr()) };
                timer.$ctrl.modify(|_, w| w.timer_enable().clear_bit());
                Ok(())
            }
        }

        impl_timer_delay!($TIMER, i32);
        impl_timer_delay!($TIMER, u32);
        impl_timer_delay!($TIMER, u16);
        impl_timer_delay!($TIMER, u8);
    };
}

macro_rules! impl_timer_delay {
    ($TIMER:ident, $ty:ty) => {
        impl DelayUs<$ty> for $TIMER {
            fn delay_us(&mut self, us: $ty) {
                self.start(Microseconds(us as u32));
                nb::block!(self.wait()).unwrap()
            }
        }

        impl DelayMs<$ty> for $TIMER {
            fn delay_ms(&mut self, ms: $ty) {
                self.delay_us(ms as u32 * 1_000);
            }
        }
    };
}

impl Timer1 {
    /// Enable edge interrupts for this timer
    ///
    /// Note that using `wait` on the timer in unreliable why interrupts are enabled
    pub fn enable_interrupts(&self) {
        let timer = unsafe { &*TIMER::ptr() };
        let dport = unsafe { &*DPORT::ptr() };

        timer.frc1_ctrl.modify(|_, w| w.interrupt_type().edge());
        dport
            .edge_int_enable
            .modify(|_, w| w.timer1_edge_int_enable().set_bit());
    }

    pub fn disable_interrupts(&self) {
        let timer = unsafe { &*TIMER::ptr() };
        let dport = unsafe { &*DPORT::ptr() };

        timer.frc1_ctrl.modify(|_, w| w.interrupt_type().level());
        dport
            .edge_int_enable
            .modify(|_, w| w.timer1_edge_int_enable().clear_bit());
    }
}

fn timer1_load_value(ticks: u32) -> u32 {
    ticks
}

fn timer2_load_value(ticks: u32) -> u32 {
    // timer2 counts up
    u32::max_value() - ticks
}

impl_timer!(
    Timer1:
        (
            frc1_ctrl,
            frc1_load,
            frc1_load,
            frc1_int,
            frc1_int_clr_mask,
            timer1_load_value
        )
);

impl_timer!(
    Timer2:
        (
            frc2_ctrl,
            frc2_load,
            frc2_alarm,
            frc2_int,
            frc2_int_clr_mask,
            timer2_load_value
        )
);