Module esp32s3::pwm0::cap_ch1_cfg

Capture channel 1 configuration and enable

Structs

CAP_CH1_CFG_SPEC

Capture channel 1 configuration and enable

R

Register CAP_CH1_CFG reader

W

Register CAP_CH1_CFG writer

Type Definitions

CAP1_EN_R

Field CAP1_EN reader - When set, capture on channel 2 is enabled

CAP1_EN_W

Field CAP1_EN writer - When set, capture on channel 2 is enabled

CAP1_IN_INVERT_R

Field CAP1_IN_INVERT reader - when set, CAP1 form GPIO matrix is inverted before prescale

CAP1_IN_INVERT_W

Field CAP1_IN_INVERT writer - when set, CAP1 form GPIO matrix is inverted before prescale

CAP1_MODE_R

Field CAP1_MODE reader - Edge of capture on channel 1 after prescaling. When bit0 is set to 1: enable capture on the negative edge, When bit1 is set to 1: enable capture on the positive edge.

CAP1_MODE_W

Field CAP1_MODE writer - Edge of capture on channel 1 after prescaling. When bit0 is set to 1: enable capture on the negative edge, When bit1 is set to 1: enable capture on the positive edge.

CAP1_PRESCALE_R

Field CAP1_PRESCALE reader - Value of prescaling on possitive edge of CAP1. Prescale value = PWM_CAP1_PRESCALE + 1

CAP1_PRESCALE_W

Field CAP1_PRESCALE writer - Value of prescaling on possitive edge of CAP1. Prescale value = PWM_CAP1_PRESCALE + 1

CAP1_SW_W

Field CAP1_SW writer - Write 1 will trigger a software forced capture on channel 1