Module esp32s3::efuse::rd_repeat_data2

source ·

Expand description

BLOCK0 data register 3.

Structs

R

Register RD_REPEAT_DATA2 reader

RD_REPEAT_DATA2_SPEC

BLOCK0 data register 3.

Type Definitions

DIS_USB_DEVICE_R

Field DIS_USB_DEVICE reader - Set this bit to disable usb device.

DIS_USB_JTAG_R

Field DIS_USB_JTAG reader - Set this bit to disable function of usb switch to jtag in module of usb device.

FLASH_TPUW_R

Field FLASH_TPUW reader - Configures flash waiting time after power-up, in unit of ms. If the value is less than 15, the waiting time is the configurable value. Otherwise, the waiting time is twice the configurable value.

KEY_PURPOSE_2_R

Field KEY_PURPOSE_2 reader - Purpose of Key2.

KEY_PURPOSE_3_R

Field KEY_PURPOSE_3 reader - Purpose of Key3.

KEY_PURPOSE_4_R

Field KEY_PURPOSE_4 reader - Purpose of Key4.

KEY_PURPOSE_5_R

Field KEY_PURPOSE_5 reader - Purpose of Key5.

POWER_GLITCH_DSENSE_R

Field POWER_GLITCH_DSENSE reader - Sample delay configuration of power glitch.

RPT4_RESERVED0_R

Field RPT4_RESERVED0 reader - Reserved (used for four backups method).

SECURE_BOOT_AGGRESSIVE_REVOKE_R

Field SECURE_BOOT_AGGRESSIVE_REVOKE reader - Set this bit to enable revoking aggressive secure boot.

SECURE_BOOT_EN_R

Field SECURE_BOOT_EN reader - Set this bit to enable secure boot.

STRAP_JTAG_SEL_R

Field STRAP_JTAG_SEL reader - Set this bit to enable selection between usb_to_jtag and pad_to_jtag through strapping gpio10 when both reg_dis_usb_jtag and reg_dis_pad_jtag are equal to 0.

USB_PHY_SEL_R

Field USB_PHY_SEL reader - This bit is used to switch internal PHY and external PHY for USB OTG and USB Device. 0: internal PHY is assigned to USB Device while external PHY is assigned to USB OTG. 1: internal PHY is assigned to USB OTG while external PHY is assigned to USB Device.