#[doc = r"Register block"]
#[repr(C)]
#[cfg_attr(feature = "impl-register-debug", derive(Debug))]
pub struct RegisterBlock {
    clk_cfg: CLK_CFG,
    timer0_cfg0: TIMER0_CFG0,
    timer0_cfg1: TIMER0_CFG1,
    timer0_sync: TIMER0_SYNC,
    timer0_status: TIMER0_STATUS,
    timer1_cfg0: TIMER1_CFG0,
    timer1_cfg1: TIMER1_CFG1,
    timer1_sync: TIMER1_SYNC,
    timer1_status: TIMER1_STATUS,
    timer2_cfg0: TIMER2_CFG0,
    timer2_cfg1: TIMER2_CFG1,
    timer2_sync: TIMER2_SYNC,
    timer2_status: TIMER2_STATUS,
    timer_synci_cfg: TIMER_SYNCI_CFG,
    operator_timersel: OPERATOR_TIMERSEL,
    cmpr0_cfg: CMPR0_CFG,
    cmpr0_value0: CMPR0_VALUE0,
    cmpr0_value1: CMPR0_VALUE1,
    gen0_cfg0: GEN0_CFG0,
    gen0_force: GEN0_FORCE,
    gen0_a: GEN0_A,
    gen0_b: GEN0_B,
    db0_cfg: DB0_CFG,
    db0_fed_cfg: DB0_FED_CFG,
    db0_red_cfg: DB0_RED_CFG,
    chopper0_cfg: CHOPPER0_CFG,
    tz0_cfg0: TZ0_CFG0,
    tz0_cfg1: TZ0_CFG1,
    tz0_status: TZ0_STATUS,
    cmpr1_cfg: CMPR1_CFG,
    cmpr1_value0: CMPR1_VALUE0,
    cmpr1_value1: CMPR1_VALUE1,
    gen1_cfg0: GEN1_CFG0,
    gen1_force: GEN1_FORCE,
    gen1_a: GEN1_A,
    gen1_b: GEN1_B,
    db1_cfg: DB1_CFG,
    db1_fed_cfg: DB1_FED_CFG,
    db1_red_cfg: DB1_RED_CFG,
    chopper1_cfg: CHOPPER1_CFG,
    tz1_cfg0: TZ1_CFG0,
    tz1_cfg1: TZ1_CFG1,
    tz1_status: TZ1_STATUS,
    cmpr2_cfg: CMPR2_CFG,
    cmpr2_value0: CMPR2_VALUE0,
    cmpr2_value1: CMPR2_VALUE1,
    gen2_cfg0: GEN2_CFG0,
    gen2_force: GEN2_FORCE,
    gen2_a: GEN2_A,
    gen2_b: GEN2_B,
    db2_cfg: DB2_CFG,
    db2_fed_cfg: DB2_FED_CFG,
    db2_red_cfg: DB2_RED_CFG,
    chopper2_cfg: CHOPPER2_CFG,
    tz2_cfg0: TZ2_CFG0,
    tz2_cfg1: TZ2_CFG1,
    tz2_status: TZ2_STATUS,
    fault_detect: FAULT_DETECT,
    cap_timer_cfg: CAP_TIMER_CFG,
    cap_timer_phase: CAP_TIMER_PHASE,
    cap_ch0_cfg: CAP_CH0_CFG,
    cap_ch1_cfg: CAP_CH1_CFG,
    cap_ch2_cfg: CAP_CH2_CFG,
    cap_ch0: CAP_CH0,
    cap_ch1: CAP_CH1,
    cap_ch2: CAP_CH2,
    cap_status: CAP_STATUS,
    update_cfg: UPDATE_CFG,
    int_ena: INT_ENA,
    int_raw: INT_RAW,
    int_st: INT_ST,
    int_clr: INT_CLR,
    clk: CLK,
    version: VERSION,
}
impl RegisterBlock {
    #[doc = "0x00 - PWM clock prescaler register."]
    #[inline(always)]
    pub const fn clk_cfg(&self) -> &CLK_CFG {
        &self.clk_cfg
    }
    #[doc = "0x04 - PWM timer0 period and update method configuration register."]
    #[inline(always)]
    pub const fn timer0_cfg0(&self) -> &TIMER0_CFG0 {
        &self.timer0_cfg0
    }
    #[doc = "0x08 - PWM timer0 working mode and start/stop control configuration register."]
    #[inline(always)]
    pub const fn timer0_cfg1(&self) -> &TIMER0_CFG1 {
        &self.timer0_cfg1
    }
    #[doc = "0x0c - PWM timer0 sync function configuration register."]
    #[inline(always)]
    pub const fn timer0_sync(&self) -> &TIMER0_SYNC {
        &self.timer0_sync
    }
    #[doc = "0x10 - PWM timer0 status register."]
    #[inline(always)]
    pub const fn timer0_status(&self) -> &TIMER0_STATUS {
        &self.timer0_status
    }
    #[doc = "0x14 - PWM timer1 period and update method configuration register."]
    #[inline(always)]
    pub const fn timer1_cfg0(&self) -> &TIMER1_CFG0 {
        &self.timer1_cfg0
    }
    #[doc = "0x18 - PWM timer1 working mode and start/stop control configuration register."]
    #[inline(always)]
    pub const fn timer1_cfg1(&self) -> &TIMER1_CFG1 {
        &self.timer1_cfg1
    }
    #[doc = "0x1c - PWM timer1 sync function configuration register."]
    #[inline(always)]
    pub const fn timer1_sync(&self) -> &TIMER1_SYNC {
        &self.timer1_sync
    }
    #[doc = "0x20 - PWM timer1 status register."]
    #[inline(always)]
    pub const fn timer1_status(&self) -> &TIMER1_STATUS {
        &self.timer1_status
    }
    #[doc = "0x24 - PWM timer2 period and update method configuration register."]
    #[inline(always)]
    pub const fn timer2_cfg0(&self) -> &TIMER2_CFG0 {
        &self.timer2_cfg0
    }
    #[doc = "0x28 - PWM timer2 working mode and start/stop control configuration register."]
    #[inline(always)]
    pub const fn timer2_cfg1(&self) -> &TIMER2_CFG1 {
        &self.timer2_cfg1
    }
    #[doc = "0x2c - PWM timer2 sync function configuration register."]
    #[inline(always)]
    pub const fn timer2_sync(&self) -> &TIMER2_SYNC {
        &self.timer2_sync
    }
    #[doc = "0x30 - PWM timer2 status register."]
    #[inline(always)]
    pub const fn timer2_status(&self) -> &TIMER2_STATUS {
        &self.timer2_status
    }
    #[doc = "0x34 - Synchronization input selection for three PWM timers."]
    #[inline(always)]
    pub const fn timer_synci_cfg(&self) -> &TIMER_SYNCI_CFG {
        &self.timer_synci_cfg
    }
    #[doc = "0x38 - Select specific timer for PWM operators."]
    #[inline(always)]
    pub const fn operator_timersel(&self) -> &OPERATOR_TIMERSEL {
        &self.operator_timersel
    }
    #[doc = "0x3c - Transfer status and update method for time stamp registers A and B"]
    #[inline(always)]
    pub const fn cmpr0_cfg(&self) -> &CMPR0_CFG {
        &self.cmpr0_cfg
    }
    #[doc = "0x40 - Shadow register for register A."]
    #[inline(always)]
    pub const fn cmpr0_value0(&self) -> &CMPR0_VALUE0 {
        &self.cmpr0_value0
    }
    #[doc = "0x44 - Shadow register for register B."]
    #[inline(always)]
    pub const fn cmpr0_value1(&self) -> &CMPR0_VALUE1 {
        &self.cmpr0_value1
    }
    #[doc = "0x48 - Fault event T0 and T1 handling"]
    #[inline(always)]
    pub const fn gen0_cfg0(&self) -> &GEN0_CFG0 {
        &self.gen0_cfg0
    }
    #[doc = "0x4c - Permissives to force PWM0A and PWM0B outputs by software"]
    #[inline(always)]
    pub const fn gen0_force(&self) -> &GEN0_FORCE {
        &self.gen0_force
    }
    #[doc = "0x50 - Actions triggered by events on PWM0A"]
    #[inline(always)]
    pub const fn gen0_a(&self) -> &GEN0_A {
        &self.gen0_a
    }
    #[doc = "0x54 - Actions triggered by events on PWM0B"]
    #[inline(always)]
    pub const fn gen0_b(&self) -> &GEN0_B {
        &self.gen0_b
    }
    #[doc = "0x58 - dead time type selection and configuration"]
    #[inline(always)]
    pub const fn db0_cfg(&self) -> &DB0_CFG {
        &self.db0_cfg
    }
    #[doc = "0x5c - Shadow register for falling edge delay (FED)."]
    #[inline(always)]
    pub const fn db0_fed_cfg(&self) -> &DB0_FED_CFG {
        &self.db0_fed_cfg
    }
    #[doc = "0x60 - Shadow register for rising edge delay (RED)."]
    #[inline(always)]
    pub const fn db0_red_cfg(&self) -> &DB0_RED_CFG {
        &self.db0_red_cfg
    }
    #[doc = "0x64 - Carrier enable and configuratoin"]
    #[inline(always)]
    pub const fn chopper0_cfg(&self) -> &CHOPPER0_CFG {
        &self.chopper0_cfg
    }
    #[doc = "0x68 - Actions on PWM0A and PWM0B trip events"]
    #[inline(always)]
    pub const fn tz0_cfg0(&self) -> &TZ0_CFG0 {
        &self.tz0_cfg0
    }
    #[doc = "0x6c - Software triggers for fault handler actions"]
    #[inline(always)]
    pub const fn tz0_cfg1(&self) -> &TZ0_CFG1 {
        &self.tz0_cfg1
    }
    #[doc = "0x70 - Status of fault events."]
    #[inline(always)]
    pub const fn tz0_status(&self) -> &TZ0_STATUS {
        &self.tz0_status
    }
    #[doc = "0x74 - Transfer status and update method for time stamp registers A and B"]
    #[inline(always)]
    pub const fn cmpr1_cfg(&self) -> &CMPR1_CFG {
        &self.cmpr1_cfg
    }
    #[doc = "0x78 - Shadow register for register A."]
    #[inline(always)]
    pub const fn cmpr1_value0(&self) -> &CMPR1_VALUE0 {
        &self.cmpr1_value0
    }
    #[doc = "0x7c - Shadow register for register B."]
    #[inline(always)]
    pub const fn cmpr1_value1(&self) -> &CMPR1_VALUE1 {
        &self.cmpr1_value1
    }
    #[doc = "0x80 - Fault event T0 and T1 handling"]
    #[inline(always)]
    pub const fn gen1_cfg0(&self) -> &GEN1_CFG0 {
        &self.gen1_cfg0
    }
    #[doc = "0x84 - Permissives to force PWM1A and PWM1B outputs by software"]
    #[inline(always)]
    pub const fn gen1_force(&self) -> &GEN1_FORCE {
        &self.gen1_force
    }
    #[doc = "0x88 - Actions triggered by events on PWM1A"]
    #[inline(always)]
    pub const fn gen1_a(&self) -> &GEN1_A {
        &self.gen1_a
    }
    #[doc = "0x8c - Actions triggered by events on PWM1B"]
    #[inline(always)]
    pub const fn gen1_b(&self) -> &GEN1_B {
        &self.gen1_b
    }
    #[doc = "0x90 - dead time type selection and configuration"]
    #[inline(always)]
    pub const fn db1_cfg(&self) -> &DB1_CFG {
        &self.db1_cfg
    }
    #[doc = "0x94 - Shadow register for falling edge delay (FED)."]
    #[inline(always)]
    pub const fn db1_fed_cfg(&self) -> &DB1_FED_CFG {
        &self.db1_fed_cfg
    }
    #[doc = "0x98 - Shadow register for rising edge delay (RED)."]
    #[inline(always)]
    pub const fn db1_red_cfg(&self) -> &DB1_RED_CFG {
        &self.db1_red_cfg
    }
    #[doc = "0x9c - Carrier enable and configuratoin"]
    #[inline(always)]
    pub const fn chopper1_cfg(&self) -> &CHOPPER1_CFG {
        &self.chopper1_cfg
    }
    #[doc = "0xa0 - Actions on PWM1A and PWM1B trip events"]
    #[inline(always)]
    pub const fn tz1_cfg0(&self) -> &TZ1_CFG0 {
        &self.tz1_cfg0
    }
    #[doc = "0xa4 - Software triggers for fault handler actions"]
    #[inline(always)]
    pub const fn tz1_cfg1(&self) -> &TZ1_CFG1 {
        &self.tz1_cfg1
    }
    #[doc = "0xa8 - Status of fault events."]
    #[inline(always)]
    pub const fn tz1_status(&self) -> &TZ1_STATUS {
        &self.tz1_status
    }
    #[doc = "0xac - Transfer status and update method for time stamp registers A and B"]
    #[inline(always)]
    pub const fn cmpr2_cfg(&self) -> &CMPR2_CFG {
        &self.cmpr2_cfg
    }
    #[doc = "0xb0 - Shadow register for register A."]
    #[inline(always)]
    pub const fn cmpr2_value0(&self) -> &CMPR2_VALUE0 {
        &self.cmpr2_value0
    }
    #[doc = "0xb4 - Shadow register for register B."]
    #[inline(always)]
    pub const fn cmpr2_value1(&self) -> &CMPR2_VALUE1 {
        &self.cmpr2_value1
    }
    #[doc = "0xb8 - Fault event T0 and T1 handling"]
    #[inline(always)]
    pub const fn gen2_cfg0(&self) -> &GEN2_CFG0 {
        &self.gen2_cfg0
    }
    #[doc = "0xbc - Permissives to force PWM2A and PWM2B outputs by software"]
    #[inline(always)]
    pub const fn gen2_force(&self) -> &GEN2_FORCE {
        &self.gen2_force
    }
    #[doc = "0xc0 - Actions triggered by events on PWM2A"]
    #[inline(always)]
    pub const fn gen2_a(&self) -> &GEN2_A {
        &self.gen2_a
    }
    #[doc = "0xc4 - Actions triggered by events on PWM2B"]
    #[inline(always)]
    pub const fn gen2_b(&self) -> &GEN2_B {
        &self.gen2_b
    }
    #[doc = "0xc8 - dead time type selection and configuration"]
    #[inline(always)]
    pub const fn db2_cfg(&self) -> &DB2_CFG {
        &self.db2_cfg
    }
    #[doc = "0xcc - Shadow register for falling edge delay (FED)."]
    #[inline(always)]
    pub const fn db2_fed_cfg(&self) -> &DB2_FED_CFG {
        &self.db2_fed_cfg
    }
    #[doc = "0xd0 - Shadow register for rising edge delay (RED)."]
    #[inline(always)]
    pub const fn db2_red_cfg(&self) -> &DB2_RED_CFG {
        &self.db2_red_cfg
    }
    #[doc = "0xd4 - Carrier enable and configuratoin"]
    #[inline(always)]
    pub const fn chopper2_cfg(&self) -> &CHOPPER2_CFG {
        &self.chopper2_cfg
    }
    #[doc = "0xd8 - Actions on PWM2A and PWM2B trip events"]
    #[inline(always)]
    pub const fn tz2_cfg0(&self) -> &TZ2_CFG0 {
        &self.tz2_cfg0
    }
    #[doc = "0xdc - Software triggers for fault handler actions"]
    #[inline(always)]
    pub const fn tz2_cfg1(&self) -> &TZ2_CFG1 {
        &self.tz2_cfg1
    }
    #[doc = "0xe0 - Status of fault events."]
    #[inline(always)]
    pub const fn tz2_status(&self) -> &TZ2_STATUS {
        &self.tz2_status
    }
    #[doc = "0xe4 - Fault detection configuration and status"]
    #[inline(always)]
    pub const fn fault_detect(&self) -> &FAULT_DETECT {
        &self.fault_detect
    }
    #[doc = "0xe8 - Configure capture timer"]
    #[inline(always)]
    pub const fn cap_timer_cfg(&self) -> &CAP_TIMER_CFG {
        &self.cap_timer_cfg
    }
    #[doc = "0xec - Phase for capture timer sync"]
    #[inline(always)]
    pub const fn cap_timer_phase(&self) -> &CAP_TIMER_PHASE {
        &self.cap_timer_phase
    }
    #[doc = "0xf0 - Capture channel 0 configuration and enable"]
    #[inline(always)]
    pub const fn cap_ch0_cfg(&self) -> &CAP_CH0_CFG {
        &self.cap_ch0_cfg
    }
    #[doc = "0xf4 - Capture channel 1 configuration and enable"]
    #[inline(always)]
    pub const fn cap_ch1_cfg(&self) -> &CAP_CH1_CFG {
        &self.cap_ch1_cfg
    }
    #[doc = "0xf8 - Capture channel 2 configuration and enable"]
    #[inline(always)]
    pub const fn cap_ch2_cfg(&self) -> &CAP_CH2_CFG {
        &self.cap_ch2_cfg
    }
    #[doc = "0xfc - Value of last capture on channel 0"]
    #[inline(always)]
    pub const fn cap_ch0(&self) -> &CAP_CH0 {
        &self.cap_ch0
    }
    #[doc = "0x100 - Value of last capture on channel 1"]
    #[inline(always)]
    pub const fn cap_ch1(&self) -> &CAP_CH1 {
        &self.cap_ch1
    }
    #[doc = "0x104 - Value of last capture on channel 2"]
    #[inline(always)]
    pub const fn cap_ch2(&self) -> &CAP_CH2 {
        &self.cap_ch2
    }
    #[doc = "0x108 - Edge of last capture trigger"]
    #[inline(always)]
    pub const fn cap_status(&self) -> &CAP_STATUS {
        &self.cap_status
    }
    #[doc = "0x10c - Enable update."]
    #[inline(always)]
    pub const fn update_cfg(&self) -> &UPDATE_CFG {
        &self.update_cfg
    }
    #[doc = "0x110 - Interrupt enable bits"]
    #[inline(always)]
    pub const fn int_ena(&self) -> &INT_ENA {
        &self.int_ena
    }
    #[doc = "0x114 - Raw interrupt status"]
    #[inline(always)]
    pub const fn int_raw(&self) -> &INT_RAW {
        &self.int_raw
    }
    #[doc = "0x118 - Masked interrupt status"]
    #[inline(always)]
    pub const fn int_st(&self) -> &INT_ST {
        &self.int_st
    }
    #[doc = "0x11c - Interrupt clear bits"]
    #[inline(always)]
    pub const fn int_clr(&self) -> &INT_CLR {
        &self.int_clr
    }
    #[doc = "0x120 - MCPWM APB configuration register"]
    #[inline(always)]
    pub const fn clk(&self) -> &CLK {
        &self.clk
    }
    #[doc = "0x124 - Version register."]
    #[inline(always)]
    pub const fn version(&self) -> &VERSION {
        &self.version
    }
}
#[doc = "CLK_CFG (rw) register accessor: PWM clock prescaler register.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`clk_cfg::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`clk_cfg::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@clk_cfg`] module"]
pub type CLK_CFG = crate::Reg<clk_cfg::CLK_CFG_SPEC>;
#[doc = "PWM clock prescaler register."]
pub mod clk_cfg;
#[doc = "TIMER0_CFG0 (rw) register accessor: PWM timer0 period and update method configuration register.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`timer0_cfg0::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`timer0_cfg0::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@timer0_cfg0`] module"]
pub type TIMER0_CFG0 = crate::Reg<timer0_cfg0::TIMER0_CFG0_SPEC>;
#[doc = "PWM timer0 period and update method configuration register."]
pub mod timer0_cfg0;
#[doc = "TIMER0_CFG1 (rw) register accessor: PWM timer0 working mode and start/stop control configuration register.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`timer0_cfg1::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`timer0_cfg1::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@timer0_cfg1`] module"]
pub type TIMER0_CFG1 = crate::Reg<timer0_cfg1::TIMER0_CFG1_SPEC>;
#[doc = "PWM timer0 working mode and start/stop control configuration register."]
pub mod timer0_cfg1;
#[doc = "TIMER0_SYNC (rw) register accessor: PWM timer0 sync function configuration register.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`timer0_sync::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`timer0_sync::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@timer0_sync`] module"]
pub type TIMER0_SYNC = crate::Reg<timer0_sync::TIMER0_SYNC_SPEC>;
#[doc = "PWM timer0 sync function configuration register."]
pub mod timer0_sync;
#[doc = "TIMER0_STATUS (r) register accessor: PWM timer0 status register.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`timer0_status::R`].  See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@timer0_status`] module"]
pub type TIMER0_STATUS = crate::Reg<timer0_status::TIMER0_STATUS_SPEC>;
#[doc = "PWM timer0 status register."]
pub mod timer0_status;
#[doc = "TIMER1_CFG0 (rw) register accessor: PWM timer1 period and update method configuration register.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`timer1_cfg0::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`timer1_cfg0::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@timer1_cfg0`] module"]
pub type TIMER1_CFG0 = crate::Reg<timer1_cfg0::TIMER1_CFG0_SPEC>;
#[doc = "PWM timer1 period and update method configuration register."]
pub mod timer1_cfg0;
#[doc = "TIMER1_CFG1 (rw) register accessor: PWM timer1 working mode and start/stop control configuration register.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`timer1_cfg1::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`timer1_cfg1::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@timer1_cfg1`] module"]
pub type TIMER1_CFG1 = crate::Reg<timer1_cfg1::TIMER1_CFG1_SPEC>;
#[doc = "PWM timer1 working mode and start/stop control configuration register."]
pub mod timer1_cfg1;
#[doc = "TIMER1_SYNC (rw) register accessor: PWM timer1 sync function configuration register.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`timer1_sync::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`timer1_sync::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@timer1_sync`] module"]
pub type TIMER1_SYNC = crate::Reg<timer1_sync::TIMER1_SYNC_SPEC>;
#[doc = "PWM timer1 sync function configuration register."]
pub mod timer1_sync;
#[doc = "TIMER1_STATUS (r) register accessor: PWM timer1 status register.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`timer1_status::R`].  See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@timer1_status`] module"]
pub type TIMER1_STATUS = crate::Reg<timer1_status::TIMER1_STATUS_SPEC>;
#[doc = "PWM timer1 status register."]
pub mod timer1_status;
#[doc = "TIMER2_CFG0 (rw) register accessor: PWM timer2 period and update method configuration register.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`timer2_cfg0::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`timer2_cfg0::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@timer2_cfg0`] module"]
pub type TIMER2_CFG0 = crate::Reg<timer2_cfg0::TIMER2_CFG0_SPEC>;
#[doc = "PWM timer2 period and update method configuration register."]
pub mod timer2_cfg0;
#[doc = "TIMER2_CFG1 (rw) register accessor: PWM timer2 working mode and start/stop control configuration register.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`timer2_cfg1::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`timer2_cfg1::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@timer2_cfg1`] module"]
pub type TIMER2_CFG1 = crate::Reg<timer2_cfg1::TIMER2_CFG1_SPEC>;
#[doc = "PWM timer2 working mode and start/stop control configuration register."]
pub mod timer2_cfg1;
#[doc = "TIMER2_SYNC (rw) register accessor: PWM timer2 sync function configuration register.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`timer2_sync::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`timer2_sync::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@timer2_sync`] module"]
pub type TIMER2_SYNC = crate::Reg<timer2_sync::TIMER2_SYNC_SPEC>;
#[doc = "PWM timer2 sync function configuration register."]
pub mod timer2_sync;
#[doc = "TIMER2_STATUS (r) register accessor: PWM timer2 status register.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`timer2_status::R`].  See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@timer2_status`] module"]
pub type TIMER2_STATUS = crate::Reg<timer2_status::TIMER2_STATUS_SPEC>;
#[doc = "PWM timer2 status register."]
pub mod timer2_status;
#[doc = "TIMER_SYNCI_CFG (rw) register accessor: Synchronization input selection for three PWM timers.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`timer_synci_cfg::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`timer_synci_cfg::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@timer_synci_cfg`] module"]
pub type TIMER_SYNCI_CFG = crate::Reg<timer_synci_cfg::TIMER_SYNCI_CFG_SPEC>;
#[doc = "Synchronization input selection for three PWM timers."]
pub mod timer_synci_cfg;
#[doc = "OPERATOR_TIMERSEL (rw) register accessor: Select specific timer for PWM operators.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`operator_timersel::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`operator_timersel::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@operator_timersel`] module"]
pub type OPERATOR_TIMERSEL = crate::Reg<operator_timersel::OPERATOR_TIMERSEL_SPEC>;
#[doc = "Select specific timer for PWM operators."]
pub mod operator_timersel;
#[doc = "CMPR0_CFG (rw) register accessor: Transfer status and update method for time stamp registers A and B\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cmpr0_cfg::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cmpr0_cfg::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cmpr0_cfg`] module"]
pub type CMPR0_CFG = crate::Reg<cmpr0_cfg::CMPR0_CFG_SPEC>;
#[doc = "Transfer status and update method for time stamp registers A and B"]
pub mod cmpr0_cfg;
#[doc = "CMPR0_VALUE0 (rw) register accessor: Shadow register for register A.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cmpr0_value0::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cmpr0_value0::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cmpr0_value0`] module"]
pub type CMPR0_VALUE0 = crate::Reg<cmpr0_value0::CMPR0_VALUE0_SPEC>;
#[doc = "Shadow register for register A."]
pub mod cmpr0_value0;
#[doc = "CMPR0_VALUE1 (rw) register accessor: Shadow register for register B.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cmpr0_value1::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cmpr0_value1::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cmpr0_value1`] module"]
pub type CMPR0_VALUE1 = crate::Reg<cmpr0_value1::CMPR0_VALUE1_SPEC>;
#[doc = "Shadow register for register B."]
pub mod cmpr0_value1;
#[doc = "GEN0_CFG0 (rw) register accessor: Fault event T0 and T1 handling\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`gen0_cfg0::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`gen0_cfg0::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@gen0_cfg0`] module"]
pub type GEN0_CFG0 = crate::Reg<gen0_cfg0::GEN0_CFG0_SPEC>;
#[doc = "Fault event T0 and T1 handling"]
pub mod gen0_cfg0;
#[doc = "GEN0_FORCE (rw) register accessor: Permissives to force PWM0A and PWM0B outputs by software\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`gen0_force::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`gen0_force::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@gen0_force`] module"]
pub type GEN0_FORCE = crate::Reg<gen0_force::GEN0_FORCE_SPEC>;
#[doc = "Permissives to force PWM0A and PWM0B outputs by software"]
pub mod gen0_force;
#[doc = "GEN0_A (rw) register accessor: Actions triggered by events on PWM0A\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`gen0_a::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`gen0_a::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@gen0_a`] module"]
pub type GEN0_A = crate::Reg<gen0_a::GEN0_A_SPEC>;
#[doc = "Actions triggered by events on PWM0A"]
pub mod gen0_a;
#[doc = "GEN0_B (rw) register accessor: Actions triggered by events on PWM0B\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`gen0_b::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`gen0_b::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@gen0_b`] module"]
pub type GEN0_B = crate::Reg<gen0_b::GEN0_B_SPEC>;
#[doc = "Actions triggered by events on PWM0B"]
pub mod gen0_b;
#[doc = "DB0_CFG (rw) register accessor: dead time type selection and configuration\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`db0_cfg::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`db0_cfg::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@db0_cfg`] module"]
pub type DB0_CFG = crate::Reg<db0_cfg::DB0_CFG_SPEC>;
#[doc = "dead time type selection and configuration"]
pub mod db0_cfg;
#[doc = "DB0_FED_CFG (rw) register accessor: Shadow register for falling edge delay (FED).\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`db0_fed_cfg::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`db0_fed_cfg::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@db0_fed_cfg`] module"]
pub type DB0_FED_CFG = crate::Reg<db0_fed_cfg::DB0_FED_CFG_SPEC>;
#[doc = "Shadow register for falling edge delay (FED)."]
pub mod db0_fed_cfg;
#[doc = "DB0_RED_CFG (rw) register accessor: Shadow register for rising edge delay (RED).\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`db0_red_cfg::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`db0_red_cfg::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@db0_red_cfg`] module"]
pub type DB0_RED_CFG = crate::Reg<db0_red_cfg::DB0_RED_CFG_SPEC>;
#[doc = "Shadow register for rising edge delay (RED)."]
pub mod db0_red_cfg;
#[doc = "CHOPPER0_CFG (rw) register accessor: Carrier enable and configuratoin\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`chopper0_cfg::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`chopper0_cfg::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@chopper0_cfg`] module"]
pub type CHOPPER0_CFG = crate::Reg<chopper0_cfg::CHOPPER0_CFG_SPEC>;
#[doc = "Carrier enable and configuratoin"]
pub mod chopper0_cfg;
#[doc = "TZ0_CFG0 (rw) register accessor: Actions on PWM0A and PWM0B trip events\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`tz0_cfg0::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`tz0_cfg0::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tz0_cfg0`] module"]
pub type TZ0_CFG0 = crate::Reg<tz0_cfg0::TZ0_CFG0_SPEC>;
#[doc = "Actions on PWM0A and PWM0B trip events"]
pub mod tz0_cfg0;
#[doc = "TZ0_CFG1 (rw) register accessor: Software triggers for fault handler actions\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`tz0_cfg1::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`tz0_cfg1::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tz0_cfg1`] module"]
pub type TZ0_CFG1 = crate::Reg<tz0_cfg1::TZ0_CFG1_SPEC>;
#[doc = "Software triggers for fault handler actions"]
pub mod tz0_cfg1;
#[doc = "TZ0_STATUS (r) register accessor: Status of fault events.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`tz0_status::R`].  See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tz0_status`] module"]
pub type TZ0_STATUS = crate::Reg<tz0_status::TZ0_STATUS_SPEC>;
#[doc = "Status of fault events."]
pub mod tz0_status;
#[doc = "CMPR1_CFG (rw) register accessor: Transfer status and update method for time stamp registers A and B\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cmpr1_cfg::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cmpr1_cfg::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cmpr1_cfg`] module"]
pub type CMPR1_CFG = crate::Reg<cmpr1_cfg::CMPR1_CFG_SPEC>;
#[doc = "Transfer status and update method for time stamp registers A and B"]
pub mod cmpr1_cfg;
#[doc = "CMPR1_VALUE0 (rw) register accessor: Shadow register for register A.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cmpr1_value0::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cmpr1_value0::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cmpr1_value0`] module"]
pub type CMPR1_VALUE0 = crate::Reg<cmpr1_value0::CMPR1_VALUE0_SPEC>;
#[doc = "Shadow register for register A."]
pub mod cmpr1_value0;
#[doc = "CMPR1_VALUE1 (rw) register accessor: Shadow register for register B.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cmpr1_value1::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cmpr1_value1::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cmpr1_value1`] module"]
pub type CMPR1_VALUE1 = crate::Reg<cmpr1_value1::CMPR1_VALUE1_SPEC>;
#[doc = "Shadow register for register B."]
pub mod cmpr1_value1;
#[doc = "GEN1_CFG0 (rw) register accessor: Fault event T0 and T1 handling\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`gen1_cfg0::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`gen1_cfg0::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@gen1_cfg0`] module"]
pub type GEN1_CFG0 = crate::Reg<gen1_cfg0::GEN1_CFG0_SPEC>;
#[doc = "Fault event T0 and T1 handling"]
pub mod gen1_cfg0;
#[doc = "GEN1_FORCE (rw) register accessor: Permissives to force PWM1A and PWM1B outputs by software\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`gen1_force::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`gen1_force::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@gen1_force`] module"]
pub type GEN1_FORCE = crate::Reg<gen1_force::GEN1_FORCE_SPEC>;
#[doc = "Permissives to force PWM1A and PWM1B outputs by software"]
pub mod gen1_force;
#[doc = "GEN1_A (rw) register accessor: Actions triggered by events on PWM1A\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`gen1_a::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`gen1_a::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@gen1_a`] module"]
pub type GEN1_A = crate::Reg<gen1_a::GEN1_A_SPEC>;
#[doc = "Actions triggered by events on PWM1A"]
pub mod gen1_a;
#[doc = "GEN1_B (rw) register accessor: Actions triggered by events on PWM1B\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`gen1_b::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`gen1_b::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@gen1_b`] module"]
pub type GEN1_B = crate::Reg<gen1_b::GEN1_B_SPEC>;
#[doc = "Actions triggered by events on PWM1B"]
pub mod gen1_b;
#[doc = "DB1_CFG (rw) register accessor: dead time type selection and configuration\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`db1_cfg::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`db1_cfg::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@db1_cfg`] module"]
pub type DB1_CFG = crate::Reg<db1_cfg::DB1_CFG_SPEC>;
#[doc = "dead time type selection and configuration"]
pub mod db1_cfg;
#[doc = "DB1_FED_CFG (rw) register accessor: Shadow register for falling edge delay (FED).\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`db1_fed_cfg::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`db1_fed_cfg::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@db1_fed_cfg`] module"]
pub type DB1_FED_CFG = crate::Reg<db1_fed_cfg::DB1_FED_CFG_SPEC>;
#[doc = "Shadow register for falling edge delay (FED)."]
pub mod db1_fed_cfg;
#[doc = "DB1_RED_CFG (rw) register accessor: Shadow register for rising edge delay (RED).\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`db1_red_cfg::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`db1_red_cfg::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@db1_red_cfg`] module"]
pub type DB1_RED_CFG = crate::Reg<db1_red_cfg::DB1_RED_CFG_SPEC>;
#[doc = "Shadow register for rising edge delay (RED)."]
pub mod db1_red_cfg;
#[doc = "CHOPPER1_CFG (rw) register accessor: Carrier enable and configuratoin\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`chopper1_cfg::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`chopper1_cfg::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@chopper1_cfg`] module"]
pub type CHOPPER1_CFG = crate::Reg<chopper1_cfg::CHOPPER1_CFG_SPEC>;
#[doc = "Carrier enable and configuratoin"]
pub mod chopper1_cfg;
#[doc = "TZ1_CFG0 (rw) register accessor: Actions on PWM1A and PWM1B trip events\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`tz1_cfg0::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`tz1_cfg0::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tz1_cfg0`] module"]
pub type TZ1_CFG0 = crate::Reg<tz1_cfg0::TZ1_CFG0_SPEC>;
#[doc = "Actions on PWM1A and PWM1B trip events"]
pub mod tz1_cfg0;
#[doc = "TZ1_CFG1 (rw) register accessor: Software triggers for fault handler actions\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`tz1_cfg1::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`tz1_cfg1::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tz1_cfg1`] module"]
pub type TZ1_CFG1 = crate::Reg<tz1_cfg1::TZ1_CFG1_SPEC>;
#[doc = "Software triggers for fault handler actions"]
pub mod tz1_cfg1;
#[doc = "TZ1_STATUS (r) register accessor: Status of fault events.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`tz1_status::R`].  See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tz1_status`] module"]
pub type TZ1_STATUS = crate::Reg<tz1_status::TZ1_STATUS_SPEC>;
#[doc = "Status of fault events."]
pub mod tz1_status;
#[doc = "CMPR2_CFG (rw) register accessor: Transfer status and update method for time stamp registers A and B\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cmpr2_cfg::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cmpr2_cfg::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cmpr2_cfg`] module"]
pub type CMPR2_CFG = crate::Reg<cmpr2_cfg::CMPR2_CFG_SPEC>;
#[doc = "Transfer status and update method for time stamp registers A and B"]
pub mod cmpr2_cfg;
#[doc = "CMPR2_VALUE0 (rw) register accessor: Shadow register for register A.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cmpr2_value0::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cmpr2_value0::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cmpr2_value0`] module"]
pub type CMPR2_VALUE0 = crate::Reg<cmpr2_value0::CMPR2_VALUE0_SPEC>;
#[doc = "Shadow register for register A."]
pub mod cmpr2_value0;
#[doc = "CMPR2_VALUE1 (rw) register accessor: Shadow register for register B.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cmpr2_value1::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cmpr2_value1::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cmpr2_value1`] module"]
pub type CMPR2_VALUE1 = crate::Reg<cmpr2_value1::CMPR2_VALUE1_SPEC>;
#[doc = "Shadow register for register B."]
pub mod cmpr2_value1;
#[doc = "GEN2_CFG0 (rw) register accessor: Fault event T0 and T1 handling\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`gen2_cfg0::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`gen2_cfg0::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@gen2_cfg0`] module"]
pub type GEN2_CFG0 = crate::Reg<gen2_cfg0::GEN2_CFG0_SPEC>;
#[doc = "Fault event T0 and T1 handling"]
pub mod gen2_cfg0;
#[doc = "GEN2_FORCE (rw) register accessor: Permissives to force PWM2A and PWM2B outputs by software\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`gen2_force::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`gen2_force::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@gen2_force`] module"]
pub type GEN2_FORCE = crate::Reg<gen2_force::GEN2_FORCE_SPEC>;
#[doc = "Permissives to force PWM2A and PWM2B outputs by software"]
pub mod gen2_force;
#[doc = "GEN2_A (rw) register accessor: Actions triggered by events on PWM2A\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`gen2_a::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`gen2_a::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@gen2_a`] module"]
pub type GEN2_A = crate::Reg<gen2_a::GEN2_A_SPEC>;
#[doc = "Actions triggered by events on PWM2A"]
pub mod gen2_a;
#[doc = "GEN2_B (rw) register accessor: Actions triggered by events on PWM2B\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`gen2_b::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`gen2_b::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@gen2_b`] module"]
pub type GEN2_B = crate::Reg<gen2_b::GEN2_B_SPEC>;
#[doc = "Actions triggered by events on PWM2B"]
pub mod gen2_b;
#[doc = "DB2_CFG (rw) register accessor: dead time type selection and configuration\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`db2_cfg::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`db2_cfg::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@db2_cfg`] module"]
pub type DB2_CFG = crate::Reg<db2_cfg::DB2_CFG_SPEC>;
#[doc = "dead time type selection and configuration"]
pub mod db2_cfg;
#[doc = "DB2_FED_CFG (rw) register accessor: Shadow register for falling edge delay (FED).\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`db2_fed_cfg::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`db2_fed_cfg::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@db2_fed_cfg`] module"]
pub type DB2_FED_CFG = crate::Reg<db2_fed_cfg::DB2_FED_CFG_SPEC>;
#[doc = "Shadow register for falling edge delay (FED)."]
pub mod db2_fed_cfg;
#[doc = "DB2_RED_CFG (rw) register accessor: Shadow register for rising edge delay (RED).\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`db2_red_cfg::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`db2_red_cfg::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@db2_red_cfg`] module"]
pub type DB2_RED_CFG = crate::Reg<db2_red_cfg::DB2_RED_CFG_SPEC>;
#[doc = "Shadow register for rising edge delay (RED)."]
pub mod db2_red_cfg;
#[doc = "CHOPPER2_CFG (rw) register accessor: Carrier enable and configuratoin\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`chopper2_cfg::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`chopper2_cfg::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@chopper2_cfg`] module"]
pub type CHOPPER2_CFG = crate::Reg<chopper2_cfg::CHOPPER2_CFG_SPEC>;
#[doc = "Carrier enable and configuratoin"]
pub mod chopper2_cfg;
#[doc = "TZ2_CFG0 (rw) register accessor: Actions on PWM2A and PWM2B trip events\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`tz2_cfg0::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`tz2_cfg0::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tz2_cfg0`] module"]
pub type TZ2_CFG0 = crate::Reg<tz2_cfg0::TZ2_CFG0_SPEC>;
#[doc = "Actions on PWM2A and PWM2B trip events"]
pub mod tz2_cfg0;
#[doc = "TZ2_CFG1 (rw) register accessor: Software triggers for fault handler actions\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`tz2_cfg1::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`tz2_cfg1::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tz2_cfg1`] module"]
pub type TZ2_CFG1 = crate::Reg<tz2_cfg1::TZ2_CFG1_SPEC>;
#[doc = "Software triggers for fault handler actions"]
pub mod tz2_cfg1;
#[doc = "TZ2_STATUS (r) register accessor: Status of fault events.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`tz2_status::R`].  See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tz2_status`] module"]
pub type TZ2_STATUS = crate::Reg<tz2_status::TZ2_STATUS_SPEC>;
#[doc = "Status of fault events."]
pub mod tz2_status;
#[doc = "FAULT_DETECT (rw) register accessor: Fault detection configuration and status\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`fault_detect::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`fault_detect::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@fault_detect`] module"]
pub type FAULT_DETECT = crate::Reg<fault_detect::FAULT_DETECT_SPEC>;
#[doc = "Fault detection configuration and status"]
pub mod fault_detect;
#[doc = "CAP_TIMER_CFG (rw) register accessor: Configure capture timer\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cap_timer_cfg::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cap_timer_cfg::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cap_timer_cfg`] module"]
pub type CAP_TIMER_CFG = crate::Reg<cap_timer_cfg::CAP_TIMER_CFG_SPEC>;
#[doc = "Configure capture timer"]
pub mod cap_timer_cfg;
#[doc = "CAP_TIMER_PHASE (rw) register accessor: Phase for capture timer sync\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cap_timer_phase::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cap_timer_phase::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cap_timer_phase`] module"]
pub type CAP_TIMER_PHASE = crate::Reg<cap_timer_phase::CAP_TIMER_PHASE_SPEC>;
#[doc = "Phase for capture timer sync"]
pub mod cap_timer_phase;
#[doc = "CAP_CH0_CFG (rw) register accessor: Capture channel 0 configuration and enable\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cap_ch0_cfg::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cap_ch0_cfg::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cap_ch0_cfg`] module"]
pub type CAP_CH0_CFG = crate::Reg<cap_ch0_cfg::CAP_CH0_CFG_SPEC>;
#[doc = "Capture channel 0 configuration and enable"]
pub mod cap_ch0_cfg;
#[doc = "CAP_CH1_CFG (rw) register accessor: Capture channel 1 configuration and enable\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cap_ch1_cfg::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cap_ch1_cfg::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cap_ch1_cfg`] module"]
pub type CAP_CH1_CFG = crate::Reg<cap_ch1_cfg::CAP_CH1_CFG_SPEC>;
#[doc = "Capture channel 1 configuration and enable"]
pub mod cap_ch1_cfg;
#[doc = "CAP_CH2_CFG (rw) register accessor: Capture channel 2 configuration and enable\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cap_ch2_cfg::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cap_ch2_cfg::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cap_ch2_cfg`] module"]
pub type CAP_CH2_CFG = crate::Reg<cap_ch2_cfg::CAP_CH2_CFG_SPEC>;
#[doc = "Capture channel 2 configuration and enable"]
pub mod cap_ch2_cfg;
#[doc = "CAP_CH0 (r) register accessor: Value of last capture on channel 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cap_ch0::R`].  See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cap_ch0`] module"]
pub type CAP_CH0 = crate::Reg<cap_ch0::CAP_CH0_SPEC>;
#[doc = "Value of last capture on channel 0"]
pub mod cap_ch0;
#[doc = "CAP_CH1 (r) register accessor: Value of last capture on channel 1\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cap_ch1::R`].  See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cap_ch1`] module"]
pub type CAP_CH1 = crate::Reg<cap_ch1::CAP_CH1_SPEC>;
#[doc = "Value of last capture on channel 1"]
pub mod cap_ch1;
#[doc = "CAP_CH2 (r) register accessor: Value of last capture on channel 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cap_ch2::R`].  See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cap_ch2`] module"]
pub type CAP_CH2 = crate::Reg<cap_ch2::CAP_CH2_SPEC>;
#[doc = "Value of last capture on channel 2"]
pub mod cap_ch2;
#[doc = "CAP_STATUS (r) register accessor: Edge of last capture trigger\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cap_status::R`].  See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cap_status`] module"]
pub type CAP_STATUS = crate::Reg<cap_status::CAP_STATUS_SPEC>;
#[doc = "Edge of last capture trigger"]
pub mod cap_status;
#[doc = "UPDATE_CFG (rw) register accessor: Enable update.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`update_cfg::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`update_cfg::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@update_cfg`] module"]
pub type UPDATE_CFG = crate::Reg<update_cfg::UPDATE_CFG_SPEC>;
#[doc = "Enable update."]
pub mod update_cfg;
#[doc = "INT_ENA (rw) register accessor: Interrupt enable bits\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`int_ena::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`int_ena::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_ena`] module"]
pub type INT_ENA = crate::Reg<int_ena::INT_ENA_SPEC>;
#[doc = "Interrupt enable bits"]
pub mod int_ena;
#[doc = "INT_RAW (rw) register accessor: Raw interrupt status\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`int_raw::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`int_raw::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_raw`] module"]
pub type INT_RAW = crate::Reg<int_raw::INT_RAW_SPEC>;
#[doc = "Raw interrupt status"]
pub mod int_raw;
#[doc = "INT_ST (r) register accessor: Masked interrupt status\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`int_st::R`].  See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_st`] module"]
pub type INT_ST = crate::Reg<int_st::INT_ST_SPEC>;
#[doc = "Masked interrupt status"]
pub mod int_st;
#[doc = "INT_CLR (w) register accessor: Interrupt clear bits\n\nYou can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`int_clr::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_clr`] module"]
pub type INT_CLR = crate::Reg<int_clr::INT_CLR_SPEC>;
#[doc = "Interrupt clear bits"]
pub mod int_clr;
#[doc = "CLK (rw) register accessor: MCPWM APB configuration register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`clk::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`clk::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@clk`] module"]
pub type CLK = crate::Reg<clk::CLK_SPEC>;
#[doc = "MCPWM APB configuration register"]
pub mod clk;
#[doc = "VERSION (rw) register accessor: Version register.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`version::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`version::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@version`] module"]
pub type VERSION = crate::Reg<version::VERSION_SPEC>;
#[doc = "Version register."]
pub mod version;