1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200

#[doc = "Register `DOUT_MODE` reader"]
pub struct R(crate::R<DOUT_MODE_SPEC>);
impl core::ops::Deref for R {
    type Target = crate::R<DOUT_MODE_SPEC>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
impl From<crate::R<DOUT_MODE_SPEC>> for R {
    #[inline(always)]
    fn from(reader: crate::R<DOUT_MODE_SPEC>) -> Self {
        R(reader)
    }
}
#[doc = "Register `DOUT_MODE` writer"]
pub struct W(crate::W<DOUT_MODE_SPEC>);
impl core::ops::Deref for W {
    type Target = crate::W<DOUT_MODE_SPEC>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
impl core::ops::DerefMut for W {
    #[inline(always)]
    fn deref_mut(&mut self) -> &mut Self::Target {
        &mut self.0
    }
}
impl From<crate::W<DOUT_MODE_SPEC>> for W {
    #[inline(always)]
    fn from(writer: crate::W<DOUT_MODE_SPEC>) -> Self {
        W(writer)
    }
}
#[doc = "Field `DOUT0_MODE` reader - The output signal 0 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
pub type DOUT0_MODE_R = crate::BitReader<bool>;
#[doc = "Field `DOUT0_MODE` writer - The output signal 0 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
pub type DOUT0_MODE_W<'a, const O: u8> = crate::BitWriter<'a, u32, DOUT_MODE_SPEC, bool, O>;
#[doc = "Field `DOUT1_MODE` reader - The output signal 1 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
pub type DOUT1_MODE_R = crate::BitReader<bool>;
#[doc = "Field `DOUT1_MODE` writer - The output signal 1 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
pub type DOUT1_MODE_W<'a, const O: u8> = crate::BitWriter<'a, u32, DOUT_MODE_SPEC, bool, O>;
#[doc = "Field `DOUT2_MODE` reader - The output signal 2 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
pub type DOUT2_MODE_R = crate::BitReader<bool>;
#[doc = "Field `DOUT2_MODE` writer - The output signal 2 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
pub type DOUT2_MODE_W<'a, const O: u8> = crate::BitWriter<'a, u32, DOUT_MODE_SPEC, bool, O>;
#[doc = "Field `DOUT3_MODE` reader - The output signal 3 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
pub type DOUT3_MODE_R = crate::BitReader<bool>;
#[doc = "Field `DOUT3_MODE` writer - The output signal 3 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
pub type DOUT3_MODE_W<'a, const O: u8> = crate::BitWriter<'a, u32, DOUT_MODE_SPEC, bool, O>;
#[doc = "Field `DOUT4_MODE` reader - The output signal 4 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
pub type DOUT4_MODE_R = crate::BitReader<bool>;
#[doc = "Field `DOUT4_MODE` writer - The output signal 4 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
pub type DOUT4_MODE_W<'a, const O: u8> = crate::BitWriter<'a, u32, DOUT_MODE_SPEC, bool, O>;
#[doc = "Field `DOUT5_MODE` reader - The output signal 5 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
pub type DOUT5_MODE_R = crate::BitReader<bool>;
#[doc = "Field `DOUT5_MODE` writer - The output signal 5 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
pub type DOUT5_MODE_W<'a, const O: u8> = crate::BitWriter<'a, u32, DOUT_MODE_SPEC, bool, O>;
#[doc = "Field `DOUT6_MODE` reader - The output signal 6 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
pub type DOUT6_MODE_R = crate::BitReader<bool>;
#[doc = "Field `DOUT6_MODE` writer - The output signal 6 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
pub type DOUT6_MODE_W<'a, const O: u8> = crate::BitWriter<'a, u32, DOUT_MODE_SPEC, bool, O>;
#[doc = "Field `DOUT7_MODE` reader - The output signal 7 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
pub type DOUT7_MODE_R = crate::BitReader<bool>;
#[doc = "Field `DOUT7_MODE` writer - The output signal 7 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
pub type DOUT7_MODE_W<'a, const O: u8> = crate::BitWriter<'a, u32, DOUT_MODE_SPEC, bool, O>;
#[doc = "Field `D_DQS_MODE` reader - The output signal SPI_DQS is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
pub type D_DQS_MODE_R = crate::BitReader<bool>;
#[doc = "Field `D_DQS_MODE` writer - The output signal SPI_DQS is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
pub type D_DQS_MODE_W<'a, const O: u8> = crate::BitWriter<'a, u32, DOUT_MODE_SPEC, bool, O>;
impl R {
    #[doc = "Bit 0 - The output signal 0 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
    #[inline(always)]
    pub fn dout0_mode(&self) -> DOUT0_MODE_R {
        DOUT0_MODE_R::new((self.bits & 1) != 0)
    }
    #[doc = "Bit 1 - The output signal 1 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
    #[inline(always)]
    pub fn dout1_mode(&self) -> DOUT1_MODE_R {
        DOUT1_MODE_R::new(((self.bits >> 1) & 1) != 0)
    }
    #[doc = "Bit 2 - The output signal 2 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
    #[inline(always)]
    pub fn dout2_mode(&self) -> DOUT2_MODE_R {
        DOUT2_MODE_R::new(((self.bits >> 2) & 1) != 0)
    }
    #[doc = "Bit 3 - The output signal 3 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
    #[inline(always)]
    pub fn dout3_mode(&self) -> DOUT3_MODE_R {
        DOUT3_MODE_R::new(((self.bits >> 3) & 1) != 0)
    }
    #[doc = "Bit 4 - The output signal 4 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
    #[inline(always)]
    pub fn dout4_mode(&self) -> DOUT4_MODE_R {
        DOUT4_MODE_R::new(((self.bits >> 4) & 1) != 0)
    }
    #[doc = "Bit 5 - The output signal 5 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
    #[inline(always)]
    pub fn dout5_mode(&self) -> DOUT5_MODE_R {
        DOUT5_MODE_R::new(((self.bits >> 5) & 1) != 0)
    }
    #[doc = "Bit 6 - The output signal 6 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
    #[inline(always)]
    pub fn dout6_mode(&self) -> DOUT6_MODE_R {
        DOUT6_MODE_R::new(((self.bits >> 6) & 1) != 0)
    }
    #[doc = "Bit 7 - The output signal 7 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
    #[inline(always)]
    pub fn dout7_mode(&self) -> DOUT7_MODE_R {
        DOUT7_MODE_R::new(((self.bits >> 7) & 1) != 0)
    }
    #[doc = "Bit 8 - The output signal SPI_DQS is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
    #[inline(always)]
    pub fn d_dqs_mode(&self) -> D_DQS_MODE_R {
        D_DQS_MODE_R::new(((self.bits >> 8) & 1) != 0)
    }
}
impl W {
    #[doc = "Bit 0 - The output signal 0 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
    #[inline(always)]
    #[must_use]
    pub fn dout0_mode(&mut self) -> DOUT0_MODE_W<0> {
        DOUT0_MODE_W::new(self)
    }
    #[doc = "Bit 1 - The output signal 1 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
    #[inline(always)]
    #[must_use]
    pub fn dout1_mode(&mut self) -> DOUT1_MODE_W<1> {
        DOUT1_MODE_W::new(self)
    }
    #[doc = "Bit 2 - The output signal 2 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
    #[inline(always)]
    #[must_use]
    pub fn dout2_mode(&mut self) -> DOUT2_MODE_W<2> {
        DOUT2_MODE_W::new(self)
    }
    #[doc = "Bit 3 - The output signal 3 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
    #[inline(always)]
    #[must_use]
    pub fn dout3_mode(&mut self) -> DOUT3_MODE_W<3> {
        DOUT3_MODE_W::new(self)
    }
    #[doc = "Bit 4 - The output signal 4 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
    #[inline(always)]
    #[must_use]
    pub fn dout4_mode(&mut self) -> DOUT4_MODE_W<4> {
        DOUT4_MODE_W::new(self)
    }
    #[doc = "Bit 5 - The output signal 5 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
    #[inline(always)]
    #[must_use]
    pub fn dout5_mode(&mut self) -> DOUT5_MODE_W<5> {
        DOUT5_MODE_W::new(self)
    }
    #[doc = "Bit 6 - The output signal 6 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
    #[inline(always)]
    #[must_use]
    pub fn dout6_mode(&mut self) -> DOUT6_MODE_W<6> {
        DOUT6_MODE_W::new(self)
    }
    #[doc = "Bit 7 - The output signal 7 is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
    #[inline(always)]
    #[must_use]
    pub fn dout7_mode(&mut self) -> DOUT7_MODE_W<7> {
        DOUT7_MODE_W::new(self)
    }
    #[doc = "Bit 8 - The output signal SPI_DQS is delayed by the SPI module clock, 0: output without delayed, 1: output delay for a SPI module clock cycle at its negative edge. Can be configured in CONF state."]
    #[inline(always)]
    #[must_use]
    pub fn d_dqs_mode(&mut self) -> D_DQS_MODE_W<8> {
        D_DQS_MODE_W::new(self)
    }
    #[doc = "Writes raw bits to the register."]
    #[inline(always)]
    pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
        self.0.bits(bits);
        self
    }
}
#[doc = "SPI output delay mode configuration\n\nThis register you can [`read`](crate::generic::Reg::read), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [dout_mode](index.html) module"]
pub struct DOUT_MODE_SPEC;
impl crate::RegisterSpec for DOUT_MODE_SPEC {
    type Ux = u32;
}
#[doc = "`read()` method returns [dout_mode::R](R) reader structure"]
impl crate::Readable for DOUT_MODE_SPEC {
    type Reader = R;
}
#[doc = "`write(|w| ..)` method takes [dout_mode::W](W) writer structure"]
impl crate::Writable for DOUT_MODE_SPEC {
    type Writer = W;
    const ZERO_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
    const ONE_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
}
#[doc = "`reset()` method sets DOUT_MODE to value 0"]
impl crate::Resettable for DOUT_MODE_SPEC {
    const RESET_VALUE: Self::Ux = 0;
}