Module esp32s3::usb_device::ep1_conf

Endpoint 1 configure and status register

Structs

• EP1_CONF_SPEC
  Endpoint 1 configure and status register
• R
  Register EP1_CONF reader
• W
  Register EP1_CONF writer

Type Definitions

• SERIAL_IN_EP_DATA_FREE_R
  Field SERIAL_IN_EP_DATA_FREE reader - 1’b1: Indicate UART Tx FIFO is not full and can write data into in. After writing USB_DEVICE_WR_DONE, this bit would be 0 until data in UART Tx FIFO is read by USB Host.
• SERIAL_OUT_EP_DATA_AVAIL_R
  Field SERIAL_OUT_EP_DATA_AVAIL reader - 1’b1: Indicate there is data in UART Rx FIFO.
• WR_DONE_W
  Field WR_DONE writer - Set this bit to indicate writing byte data to UART Tx FIFO is done.