Module esp32s3::spi0::int_raw

SPI1 interrupt raw register

Structs

INT_RAW_SPEC

SPI1 interrupt raw register

R

Register INT_RAW reader

Type Definitions

ECC_ERR_INT_RAW_R

Field ECC_ERR_INT_RAW reader - The raw bit for SPI_MEM_ECC_ERR_INT interrupt. When APB_CTRL_FECC_ERR_INT_EN is set and APB_CTRL_SECC_ERR_INT_EN is cleared, this bit is triggered when the error times of SPI0/1 ECC read flash are equal or bigger than APB_CTRL_ECC_ERR_INT_NUM. When APB_CTRL_FECC_ERR_INT_EN is cleared and APB_CTRL_SECC_ERR_INT_EN is set, this bit is triggered when the error times of SPI0/1 ECC read external RAM are equal or bigger than APB_CTRL_ECC_ERR_INT_NUM. When APB_CTRL_FECC_ERR_INT_EN and APB_CTRL_SECC_ERR_INT_EN are set, this bit is triggered when the total error times of SPI0/1 ECC read external RAM and flash are equal or bigger than APB_CTRL_ECC_ERR_INT_NUM. When APB_CTRL_FECC_ERR_INT_EN and APB_CTRL_SECC_ERR_INT_EN are cleared, this bit will not be triggered.

TOTAL_TRANS_END_INT_RAW_R

Field TOTAL_TRANS_END_INT_RAW reader - The raw bit for SPI_MEM_TOTAL_TRANS_END_INT interrupt. 1: Triggered when SPI1 transfer is done and flash is already idle. When WRSR/PP/SE/BE/CE is sent and PES/PER command is sent, this bit is set when WRSR/PP/SE/BE/CE is success. 0: Others.