Module esp32s3_hal::pac::usb_device::conf0

Expand description

Configure 0 register

Structs

Configure 0 register

Register CONF0 reader

Register CONF0 writer

Type Definitions

Field DM_PULLDOWN reader - Control USB D- pull down.

Field DM_PULLDOWN writer - Control USB D- pull down.

Field DM_PULLUP reader - Control USB D- pull up.

Field DM_PULLUP writer - Control USB D- pull up.

Field DP_PULLDOWN reader - Control USB D+ pull down.

Field DP_PULLDOWN writer - Control USB D+ pull down.

Field DP_PULLUP reader - Control USB D+ pull up.

Field DP_PULLUP writer - Control USB D+ pull up.

EXCHG_PINS_OVERRIDE_R

Field EXCHG_PINS_OVERRIDE reader - Enable software control USB D+ D- exchange

EXCHG_PINS_OVERRIDE_W

Field EXCHG_PINS_OVERRIDE writer - Enable software control USB D+ D- exchange

Field EXCHG_PINS reader - USB D+ D- exchange

Field EXCHG_PINS writer - USB D+ D- exchange

PAD_PULL_OVERRIDE_R

Field PAD_PULL_OVERRIDE reader - Enable software control USB D+ D- pullup pulldown

PAD_PULL_OVERRIDE_W

Field PAD_PULL_OVERRIDE writer - Enable software control USB D+ D- pullup pulldown

Field PHY_SEL reader - Select internal/external PHY

Field PHY_SEL writer - Select internal/external PHY

PHY_TX_EDGE_SEL_R

Field PHY_TX_EDGE_SEL reader - 0: TX output at clock negedge. 1: Tx output at clock posedge.

PHY_TX_EDGE_SEL_W

Field PHY_TX_EDGE_SEL writer - 0: TX output at clock negedge. 1: Tx output at clock posedge.

Field PULLUP_VALUE reader - Control pull up value.

Field PULLUP_VALUE writer - Control pull up value.

USB_JTAG_BRIDGE_EN_R

Field USB_JTAG_BRIDGE_EN reader - Set this bit usb_jtag, the connection between usb_jtag and internal JTAG is disconnected, and MTMS, MTDI, MTCK are output through GPIO Matrix, MTDO is input through GPIO Matrix.

USB_JTAG_BRIDGE_EN_W

Field USB_JTAG_BRIDGE_EN writer - Set this bit usb_jtag, the connection between usb_jtag and internal JTAG is disconnected, and MTMS, MTDI, MTCK are output through GPIO Matrix, MTDO is input through GPIO Matrix.

USB_PAD_ENABLE_R

Field USB_PAD_ENABLE reader - Enable USB pad function.

USB_PAD_ENABLE_W

Field USB_PAD_ENABLE writer - Enable USB pad function.

Field VREFH reader - Control single-end input high threshold,1.76V to 2V, step 80mV

Field VREFH writer - Control single-end input high threshold,1.76V to 2V, step 80mV

Field VREFL reader - Control single-end input low threshold,0.8V to 1.04V, step 80mV

Field VREFL writer - Control single-end input low threshold,0.8V to 1.04V, step 80mV

VREF_OVERRIDE_R

Field VREF_OVERRIDE reader - Enable software control input threshold

VREF_OVERRIDE_W

Field VREF_OVERRIDE writer - Enable software control input threshold