Module esp32s3_hal::pac::pwm0::gen1_force

Expand description

Permissives to force PWM1A and PWM1B outputs by software

Structs

GEN1_FORCE_SPEC

Permissives to force PWM1A and PWM1B outputs by software

R

Register GEN1_FORCE reader

W

Register GEN1_FORCE writer

Type Definitions

GEN1_A_CNTUFORCE_MODE_R

Field GEN1_A_CNTUFORCE_MODE reader - Continuous software force mode for PWM1A. 0: disabled, 1: low, 2: high, 3: disabled

GEN1_A_CNTUFORCE_MODE_W

Field GEN1_A_CNTUFORCE_MODE writer - Continuous software force mode for PWM1A. 0: disabled, 1: low, 2: high, 3: disabled

GEN1_A_NCIFORCE_MODE_R

Field GEN1_A_NCIFORCE_MODE reader - non-continuous immediate software force mode for PWM1A, 0: disabled, 1: low, 2: high, 3: disabled

GEN1_A_NCIFORCE_MODE_W

Field GEN1_A_NCIFORCE_MODE writer - non-continuous immediate software force mode for PWM1A, 0: disabled, 1: low, 2: high, 3: disabled

GEN1_A_NCIFORCE_R

Field GEN1_A_NCIFORCE reader - Trigger of non-continuous immediate software-force event for PWM1A, a toggle will trigger a force event.

GEN1_A_NCIFORCE_W

Field GEN1_A_NCIFORCE writer - Trigger of non-continuous immediate software-force event for PWM1A, a toggle will trigger a force event.

GEN1_B_CNTUFORCE_MODE_R

Field GEN1_B_CNTUFORCE_MODE reader - Continuous software force mode for PWM1B. 0: disabled, 1: low, 2: high, 3: disabled

GEN1_B_CNTUFORCE_MODE_W

Field GEN1_B_CNTUFORCE_MODE writer - Continuous software force mode for PWM1B. 0: disabled, 1: low, 2: high, 3: disabled

GEN1_B_NCIFORCE_MODE_R

Field GEN1_B_NCIFORCE_MODE reader - non-continuous immediate software force mode for PWM1B, 0: disabled, 1: low, 2: high, 3: disabled

GEN1_B_NCIFORCE_MODE_W

Field GEN1_B_NCIFORCE_MODE writer - non-continuous immediate software force mode for PWM1B, 0: disabled, 1: low, 2: high, 3: disabled

GEN1_B_NCIFORCE_R

Field GEN1_B_NCIFORCE reader - Trigger of non-continuous immediate software-force event for PWM1B, a toggle will trigger a force event.

GEN1_B_NCIFORCE_W

Field GEN1_B_NCIFORCE writer - Trigger of non-continuous immediate software-force event for PWM1B, a toggle will trigger a force event.

GEN1_CNTUFORCE_UPMETHOD_R

Field GEN1_CNTUFORCE_UPMETHOD reader - Updating method for continuous software force of PWM generator 1. When all bits are set to 0: immediately, when bit0 is set to 1: TEZ,,when bit1 is set to 1: TEP, when bit2 is set to 1: TEA, when bit3 is set to 1: TEB, when bit4 is set to 1: sync, when bit5 is set to 1: disable update. (TEA/B here and below means an event generated when the timer’s value equals to that of register A/B.)

GEN1_CNTUFORCE_UPMETHOD_W

Field GEN1_CNTUFORCE_UPMETHOD writer - Updating method for continuous software force of PWM generator 1. When all bits are set to 0: immediately, when bit0 is set to 1: TEZ,,when bit1 is set to 1: TEP, when bit2 is set to 1: TEA, when bit3 is set to 1: TEB, when bit4 is set to 1: sync, when bit5 is set to 1: disable update. (TEA/B here and below means an event generated when the timer’s value equals to that of register A/B.)