Module esp32s3_hal::pac::efuse::rd_repeat_data1

Expand description

BLOCK0 data register 2.

Structs

Register RD_REPEAT_DATA1 reader

BLOCK0 data register 2.

Field KEY_PURPOSE_0 reader - Purpose of Key0.

Field KEY_PURPOSE_1 reader - Purpose of Key1.

Field SECURE_BOOT_KEY_REVOKE0 reader - Set this bit to enable revoking first secure boot key.

Field SECURE_BOOT_KEY_REVOKE1 reader - Set this bit to enable revoking second secure boot key.

Field SECURE_BOOT_KEY_REVOKE2 reader - Set this bit to enable revoking third secure boot key.

Field SPI_BOOT_CRYPT_CNT reader - Set this bit to enable SPI boot encrypt/decrypt. Odd number of 1: enable. even number of 1: disable.

Field VDD_SPI_DCAP reader - Prevents SPI regulator from overshoot.

Field VDD_SPI_DCURLIM reader - Tunes the current limit threshold of SPI regulator when tieh=0, about 800 mA/(8+d).

Field VDD_SPI_DREFL reader - SPI regulator low voltage reference.

Field VDD_SPI_DREFM reader - SPI regulator medium voltage reference.

Field VDD_SPI_ENCURLIM reader - Set SPI regulator to 1 to enable output current limit.

Field VDD_SPI_EN_INIT reader - Set SPI regulator to 0 to configure init[1:0]=0.

Field VDD_SPI_FORCE reader - Set this bit and force to use the configuration of eFuse to configure VDD_SPI.

Field VDD_SPI_INIT reader - Adds resistor from LDO output to ground. 0: no resistance 1: 6 K 2: 4 K 3: 2 K.

Field VDD_SPI_TIEH reader - SPI regulator output is short connected to VDD3P3_RTC_IO.

Field VDD_SPI_XPD reader - SPI regulator power up signal.

Field WDT_DELAY_SEL reader - Selects RTC watchdog timeout threshold, in unit of slow clock cycle. 0: 40000. 1: 80000. 2: 160000. 3:320000.