Module esp32s3_hal::pac::efuse::rd_repeat_data0

Expand description

BLOCK0 data register 1.

Structs

Register RD_REPEAT_DATA0 reader

BLOCK0 data register 1.

Field BTLC_GPIO_ENABLE reader - Bluetooth GPIO signal output security level control.

Field DIS_APP_CPU reader - Disable app cpu.

Field DIS_CAN reader - Set this bit to disable CAN function.

Field DIS_DCACHE reader - Set this bit to disable Dcache.

Field DIS_DOWNLOAD_DCACHE reader - Set this bit to disable Dcache in download mode ( boot_mode[3:0] is 0, 1, 2, 3, 6, 7).

Field DIS_DOWNLOAD_ICACHE reader - Set this bit to disable Icache in download mode (boot_mode[3:0] is 0, 1, 2, 3, 6, 7).

Field DIS_DOWNLOAD_MANUAL_ENCRYPT reader - Set this bit to disable flash encryption when in download boot modes.

Field DIS_FORCE_DOWNLOAD reader - Set this bit to disable the function that forces chip into download mode.

Field DIS_ICACHE reader - Set this bit to disable Icache.

Field DIS_PAD_JTAG reader - Set this bit to disable JTAG in the hard way. JTAG is disabled permanently.

Field DIS_RTC_RAM_BOOT reader - Set this bit to disable boot from RTC RAM.

Field DIS_USB reader - Set this bit to disable USB function.

Field EXT_PHY_ENABLE reader - Set this bit to enable external PHY.

Field RD_DIS reader - Set this bit to disable reading from BlOCK4-10.

Field SOFT_DIS_JTAG reader - Set these bits to disable JTAG in the soft way (odd number 1 means disable ). JTAG can be enabled in HMAC module.

Field USB_DREFH reader - Controls single-end input threshold vrefh, 1.76 V to 2 V with step of 80 mV, stored in eFuse.

Field USB_DREFL reader - Controls single-end input threshold vrefl, 0.8 V to 1.04 V with step of 80 mV, stored in eFuse.

Field USB_EXCHG_PINS reader - Set this bit to exchange USB D+ and D- pins.

Field VDD_SPI_DREFH reader - SPI regulator high voltage reference.

Field VDD_SPI_MODECURLIM reader - SPI regulator switches current limit mode.