Module timing

I2S timing register

Structs

TIMING_SPEC

I2S timing register

Type Aliases

DATA_ENABLE_DELAY_R

Field DATA_ENABLE_DELAY reader - Number of delay cycles for data valid flag based on I2S0_CLK. 0: delayed by 1.5 cycles. 1: delayed by 2.5 cycles. 2: delayed by 3.5 cycles. 3: delayed by 4.5 cycles.

DATA_ENABLE_DELAY_W

Field DATA_ENABLE_DELAY writer - Number of delay cycles for data valid flag based on I2S0_CLK. 0: delayed by 1.5 cycles. 1: delayed by 2.5 cycles. 2: delayed by 3.5 cycles. 3: delayed by 4.5 cycles.

R

Register TIMING reader

RX_BCK_IN_DELAY_R

Field RX_BCK_IN_DELAY reader - Number of delay cycles for BCK signal into the receiver based on I2S0_CLK. 0: delayed by 1.5 cycles. 1: delayed by 2.5 cycles. 2: delayed by 3.5 cycles. 3: delayed by 4.5 cycles.

RX_BCK_IN_DELAY_W

Field RX_BCK_IN_DELAY writer - Number of delay cycles for BCK signal into the receiver based on I2S0_CLK. 0: delayed by 1.5 cycles. 1: delayed by 2.5 cycles. 2: delayed by 3.5 cycles. 3: delayed by 4.5 cycles.

RX_BCK_OUT_DELAY_R

Field RX_BCK_OUT_DELAY reader - Number of delay cycles for BCK signal out of the receiver based on I2S0_CLK. 0: delayed by 0 cycle. 1: delayed by 1 cycle. 2: delayed by 2 cycles. 3: delayed by 3 cycles.

RX_BCK_OUT_DELAY_W

Field RX_BCK_OUT_DELAY writer - Number of delay cycles for BCK signal out of the receiver based on I2S0_CLK. 0: delayed by 0 cycle. 1: delayed by 1 cycle. 2: delayed by 2 cycles. 3: delayed by 3 cycles.

RX_DSYNC_SW_R

Field RX_DSYNC_SW reader - Set this bit to synchronize signals into the receiver by two flip-flop synchronizer. 0: the signals will be clocked by rising clock edge firstly, then clocked by falling clock edge. 1: the signals will be clocked by falling clock edge firstly, then clocked by rising clock edge.

RX_DSYNC_SW_W

Field RX_DSYNC_SW writer - Set this bit to synchronize signals into the receiver by two flip-flop synchronizer. 0: the signals will be clocked by rising clock edge firstly, then clocked by falling clock edge. 1: the signals will be clocked by falling clock edge firstly, then clocked by rising clock edge.

RX_SD_IN_DELAY_R

Field RX_SD_IN_DELAY reader - Number of delay cycles for SD signal into the receiver based on I2S0_CLK. 0: delayed by 1.5 cycles. 1: delayed by 2.5 cycles. 2: delayed by 3.5 cycles. 3: delayed by 4.5 cycles.

RX_SD_IN_DELAY_W

Field RX_SD_IN_DELAY writer - Number of delay cycles for SD signal into the receiver based on I2S0_CLK. 0: delayed by 1.5 cycles. 1: delayed by 2.5 cycles. 2: delayed by 3.5 cycles. 3: delayed by 4.5 cycles.

RX_WS_IN_DELAY_R

Field RX_WS_IN_DELAY reader - Number of delay cycles for WS signal into the receiver based on I2S0_CLK. 0: delayed by 1.5 cycles. 1: delayed by 2.5 cycles. 2: delayed by 3.5 cycles. 3: delayed by 4.5 cycles.

RX_WS_IN_DELAY_W

Field RX_WS_IN_DELAY writer - Number of delay cycles for WS signal into the receiver based on I2S0_CLK. 0: delayed by 1.5 cycles. 1: delayed by 2.5 cycles. 2: delayed by 3.5 cycles. 3: delayed by 4.5 cycles.

RX_WS_OUT_DELAY_R

Field RX_WS_OUT_DELAY reader - Number of delay cycles for WS signal out of the receiver based on I2S0_CLK. 0: delayed by 0 cycle. 1: delayed by 1 cycle. 2: delayed by 2 cycles. 3: delayed by 3 cycles.

RX_WS_OUT_DELAY_W

Field RX_WS_OUT_DELAY writer - Number of delay cycles for WS signal out of the receiver based on I2S0_CLK. 0: delayed by 0 cycle. 1: delayed by 1 cycle. 2: delayed by 2 cycles. 3: delayed by 3 cycles.

TX_BCK_IN_DELAY_R

Field TX_BCK_IN_DELAY reader - Number of delay cycles for BCK signal into the transmitter based on I2S0_CLK. 0: delayed by 1.5 cycles. 1: delayed by 2.5 cycles. 2: delayed by 3.5 cycles. 3: delayed by 4.5 cycles.

TX_BCK_IN_DELAY_W

Field TX_BCK_IN_DELAY writer - Number of delay cycles for BCK signal into the transmitter based on I2S0_CLK. 0: delayed by 1.5 cycles. 1: delayed by 2.5 cycles. 2: delayed by 3.5 cycles. 3: delayed by 4.5 cycles.

TX_BCK_IN_INV_R

Field TX_BCK_IN_INV reader - Set this bit to invert BCK signal input to the slave transmitter.

TX_BCK_IN_INV_W

Field TX_BCK_IN_INV writer - Set this bit to invert BCK signal input to the slave transmitter.

TX_BCK_OUT_DELAY_R

Field TX_BCK_OUT_DELAY reader - Number of delay cycles for BCK signal out of the transmitter based on I2S0_CLK. 0: delayed by 0 cycle. 1: delayed by 1 cycle. 2: delayed by 2 cycles. 3: delayed by 3 cycles.

TX_BCK_OUT_DELAY_W

Field TX_BCK_OUT_DELAY writer - Number of delay cycles for BCK signal out of the transmitter based on I2S0_CLK. 0: delayed by 0 cycle. 1: delayed by 1 cycle. 2: delayed by 2 cycles. 3: delayed by 3 cycles.

TX_DSYNC_SW_R

Field TX_DSYNC_SW reader - Set this bit to synchronize signals into the transmitter by two flip-flop synchronizer. 0: the signals will be firstly clocked by rising clock edge , then clocked by falling clock edge. 1: the signals will be firstly clocked by falling clock edge, then clocked by rising clock edge.

TX_DSYNC_SW_W

Field TX_DSYNC_SW writer - Set this bit to synchronize signals into the transmitter by two flip-flop synchronizer. 0: the signals will be firstly clocked by rising clock edge , then clocked by falling clock edge. 1: the signals will be firstly clocked by falling clock edge, then clocked by rising clock edge.

TX_SD_OUT_DELAY_R

Field TX_SD_OUT_DELAY reader - Number of delay cycles for SD signal out of the transmitter based on I2S0_CLK. 0: delayed by 0 cycle. 1: delayed by 1 cycle. 2: delayed by 2 cycles. 3: delayed by 3 cycles.

TX_SD_OUT_DELAY_W

Field TX_SD_OUT_DELAY writer - Number of delay cycles for SD signal out of the transmitter based on I2S0_CLK. 0: delayed by 0 cycle. 1: delayed by 1 cycle. 2: delayed by 2 cycles. 3: delayed by 3 cycles.

TX_WS_IN_DELAY_R

Field TX_WS_IN_DELAY reader - Number of delay cycles for WS signal into the transmitter based on I2S0_CLK. 0: delayed by 1.5 cycles. 1: delayed by 2.5 cycles. 2: delayed by 3.5 cycles. 3: delayed by 4.5 cycles.

TX_WS_IN_DELAY_W

Field TX_WS_IN_DELAY writer - Number of delay cycles for WS signal into the transmitter based on I2S0_CLK. 0: delayed by 1.5 cycles. 1: delayed by 2.5 cycles. 2: delayed by 3.5 cycles. 3: delayed by 4.5 cycles.

TX_WS_OUT_DELAY_R

Field TX_WS_OUT_DELAY reader - Number of delay cycles for WS signal out of the transmitter based on I2S0_CLK. 0: delayed by 0 cycle. 1: delayed by 1 cycle. 2: delayed by 2 cycles. 3: delayed by 3 cycles.

TX_WS_OUT_DELAY_W

Field TX_WS_OUT_DELAY writer - Number of delay cycles for WS signal out of the transmitter based on I2S0_CLK. 0: delayed by 0 cycle. 1: delayed by 1 cycle. 2: delayed by 2 cycles. 3: delayed by 3 cycles.

W

Register TIMING writer