Module rd_repeat_data2

Register 3 of BLOCK0.

Structs

RD_REPEAT_DATA2_SPEC

Register 3 of BLOCK0.

Type Aliases

FLASH_TPUW_R

Field FLASH_TPUW reader - Configures flash startup delay after SoC power-up, in unit of (ms/2). When the value is 15, delay is 7.5 ms.

KEY_PURPOSE_2_R

Field KEY_PURPOSE_2 reader - Purpose of KEY2. Refer to Table Key Purpose Values.

KEY_PURPOSE_3_R

Field KEY_PURPOSE_3 reader - Purpose of KEY3. Refer to Table Key Purpose Values.

KEY_PURPOSE_4_R

Field KEY_PURPOSE_4 reader - Purpose of KEY4. Refer to Table Key Purpose Values.

KEY_PURPOSE_5_R

Field KEY_PURPOSE_5 reader - Purpose of KEY5. Refer to Table Key Purpose Values.

KEY_PURPOSE_6_R

Field KEY_PURPOSE_6 reader - Purpose of KEY6. Refer to Table Key Purpose Values.

R

Register RD_REPEAT_DATA2 reader

RPT4_RESERVED1_R

Field RPT4_RESERVED1 reader - Reserved (used for four backups method).

SECURE_BOOT_AGGRESSIVE_REVOKE_R

Field SECURE_BOOT_AGGRESSIVE_REVOKE reader - Set this bit to enable aggressive secure boot key revocation mode.

SECURE_BOOT_EN_R

Field SECURE_BOOT_EN reader - Set this bit to enable secure boot.