1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144

#[doc = "Register `LCD_D_MODE` reader"]
pub type R = crate::R<LCD_D_MODE_SPEC>;
#[doc = "Register `LCD_D_MODE` writer"]
pub type W = crate::W<LCD_D_MODE_SPEC>;
#[doc = "Field `D_DQS_MODE` reader - the output spi_dqs is delayed by system clock cycles, 0: output without delayed, 1: output with the posedge of clk_apb,2 output with the negedge of clk_apb, 3: output with the spi_clk. Can be configured in CONF state."]
pub type D_DQS_MODE_R = crate::FieldReader;
#[doc = "Field `D_DQS_MODE` writer - the output spi_dqs is delayed by system clock cycles, 0: output without delayed, 1: output with the posedge of clk_apb,2 output with the negedge of clk_apb, 3: output with the spi_clk. Can be configured in CONF state."]
pub type D_DQS_MODE_W<'a, REG> = crate::FieldWriter<'a, REG, 3>;
#[doc = "Field `D_CD_MODE` reader - the output spi_cd is delayed by system clock cycles, 0: output without delayed, 1: output with the posedge of clk_apb,2 output with the negedge of clk_apb, 3: output with the spi_clk. Can be configured in CONF state."]
pub type D_CD_MODE_R = crate::FieldReader;
#[doc = "Field `D_CD_MODE` writer - the output spi_cd is delayed by system clock cycles, 0: output without delayed, 1: output with the posedge of clk_apb,2 output with the negedge of clk_apb, 3: output with the spi_clk. Can be configured in CONF state."]
pub type D_CD_MODE_W<'a, REG> = crate::FieldWriter<'a, REG, 3>;
#[doc = "Field `D_DE_MODE` reader - the output spi_de is delayed by system clock cycles, 0: output without delayed, 1: output with the posedge of clk_apb,2 output with the negedge of clk_apb, 3: output with the spi_clk. Can be configured in CONF state."]
pub type D_DE_MODE_R = crate::FieldReader;
#[doc = "Field `D_DE_MODE` writer - the output spi_de is delayed by system clock cycles, 0: output without delayed, 1: output with the posedge of clk_apb,2 output with the negedge of clk_apb, 3: output with the spi_clk. Can be configured in CONF state."]
pub type D_DE_MODE_W<'a, REG> = crate::FieldWriter<'a, REG, 3>;
#[doc = "Field `D_HSYNC_MODE` reader - the output spi_hsync is delayed by system clock cycles, 0: output without delayed, 1: output with the posedge of clk_apb,2 output with the negedge of clk_apb, 3: output with the spi_clk. Can be configured in CONF state."]
pub type D_HSYNC_MODE_R = crate::FieldReader;
#[doc = "Field `D_HSYNC_MODE` writer - the output spi_hsync is delayed by system clock cycles, 0: output without delayed, 1: output with the posedge of clk_apb,2 output with the negedge of clk_apb, 3: output with the spi_clk. Can be configured in CONF state."]
pub type D_HSYNC_MODE_W<'a, REG> = crate::FieldWriter<'a, REG, 3>;
#[doc = "Field `D_VSYNC_MODE` reader - the output spi_vsync is delayed by system clock cycles, 0: output without delayed, 1: output with the posedge of clk_apb,2 output with the negedge of clk_apb, 3: output with the spi_clk. Can be configured in CONF state."]
pub type D_VSYNC_MODE_R = crate::FieldReader;
#[doc = "Field `D_VSYNC_MODE` writer - the output spi_vsync is delayed by system clock cycles, 0: output without delayed, 1: output with the posedge of clk_apb,2 output with the negedge of clk_apb, 3: output with the spi_clk. Can be configured in CONF state."]
pub type D_VSYNC_MODE_W<'a, REG> = crate::FieldWriter<'a, REG, 3>;
#[doc = "Field `DE_IDLE_POL` reader - It is the idle value of spi_de."]
pub type DE_IDLE_POL_R = crate::BitReader;
#[doc = "Field `DE_IDLE_POL` writer - It is the idle value of spi_de."]
pub type DE_IDLE_POL_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `HS_BLANK_EN` reader - 1: The pulse of spi_hsync is out in vertical blanking lines in seg-trans or one trans. 0: spi_hsync pulse is valid only in active region lines in seg-trans."]
pub type HS_BLANK_EN_R = crate::BitReader;
#[doc = "Field `HS_BLANK_EN` writer - 1: The pulse of spi_hsync is out in vertical blanking lines in seg-trans or one trans. 0: spi_hsync pulse is valid only in active region lines in seg-trans."]
pub type HS_BLANK_EN_W<'a, REG> = crate::BitWriter<'a, REG>;
impl R {
    #[doc = "Bits 0:2 - the output spi_dqs is delayed by system clock cycles, 0: output without delayed, 1: output with the posedge of clk_apb,2 output with the negedge of clk_apb, 3: output with the spi_clk. Can be configured in CONF state."]
    #[inline(always)]
    pub fn d_dqs_mode(&self) -> D_DQS_MODE_R {
        D_DQS_MODE_R::new((self.bits & 7) as u8)
    }
    #[doc = "Bits 3:5 - the output spi_cd is delayed by system clock cycles, 0: output without delayed, 1: output with the posedge of clk_apb,2 output with the negedge of clk_apb, 3: output with the spi_clk. Can be configured in CONF state."]
    #[inline(always)]
    pub fn d_cd_mode(&self) -> D_CD_MODE_R {
        D_CD_MODE_R::new(((self.bits >> 3) & 7) as u8)
    }
    #[doc = "Bits 6:8 - the output spi_de is delayed by system clock cycles, 0: output without delayed, 1: output with the posedge of clk_apb,2 output with the negedge of clk_apb, 3: output with the spi_clk. Can be configured in CONF state."]
    #[inline(always)]
    pub fn d_de_mode(&self) -> D_DE_MODE_R {
        D_DE_MODE_R::new(((self.bits >> 6) & 7) as u8)
    }
    #[doc = "Bits 9:11 - the output spi_hsync is delayed by system clock cycles, 0: output without delayed, 1: output with the posedge of clk_apb,2 output with the negedge of clk_apb, 3: output with the spi_clk. Can be configured in CONF state."]
    #[inline(always)]
    pub fn d_hsync_mode(&self) -> D_HSYNC_MODE_R {
        D_HSYNC_MODE_R::new(((self.bits >> 9) & 7) as u8)
    }
    #[doc = "Bits 12:14 - the output spi_vsync is delayed by system clock cycles, 0: output without delayed, 1: output with the posedge of clk_apb,2 output with the negedge of clk_apb, 3: output with the spi_clk. Can be configured in CONF state."]
    #[inline(always)]
    pub fn d_vsync_mode(&self) -> D_VSYNC_MODE_R {
        D_VSYNC_MODE_R::new(((self.bits >> 12) & 7) as u8)
    }
    #[doc = "Bit 15 - It is the idle value of spi_de."]
    #[inline(always)]
    pub fn de_idle_pol(&self) -> DE_IDLE_POL_R {
        DE_IDLE_POL_R::new(((self.bits >> 15) & 1) != 0)
    }
    #[doc = "Bit 16 - 1: The pulse of spi_hsync is out in vertical blanking lines in seg-trans or one trans. 0: spi_hsync pulse is valid only in active region lines in seg-trans."]
    #[inline(always)]
    pub fn hs_blank_en(&self) -> HS_BLANK_EN_R {
        HS_BLANK_EN_R::new(((self.bits >> 16) & 1) != 0)
    }
}
#[cfg(feature = "impl-register-debug")]
impl core::fmt::Debug for R {
    fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
        f.debug_struct("LCD_D_MODE")
            .field("d_dqs_mode", &self.d_dqs_mode())
            .field("d_cd_mode", &self.d_cd_mode())
            .field("d_de_mode", &self.d_de_mode())
            .field("d_hsync_mode", &self.d_hsync_mode())
            .field("d_vsync_mode", &self.d_vsync_mode())
            .field("de_idle_pol", &self.de_idle_pol())
            .field("hs_blank_en", &self.hs_blank_en())
            .finish()
    }
}
impl W {
    #[doc = "Bits 0:2 - the output spi_dqs is delayed by system clock cycles, 0: output without delayed, 1: output with the posedge of clk_apb,2 output with the negedge of clk_apb, 3: output with the spi_clk. Can be configured in CONF state."]
    #[inline(always)]
    #[must_use]
    pub fn d_dqs_mode(&mut self) -> D_DQS_MODE_W<LCD_D_MODE_SPEC> {
        D_DQS_MODE_W::new(self, 0)
    }
    #[doc = "Bits 3:5 - the output spi_cd is delayed by system clock cycles, 0: output without delayed, 1: output with the posedge of clk_apb,2 output with the negedge of clk_apb, 3: output with the spi_clk. Can be configured in CONF state."]
    #[inline(always)]
    #[must_use]
    pub fn d_cd_mode(&mut self) -> D_CD_MODE_W<LCD_D_MODE_SPEC> {
        D_CD_MODE_W::new(self, 3)
    }
    #[doc = "Bits 6:8 - the output spi_de is delayed by system clock cycles, 0: output without delayed, 1: output with the posedge of clk_apb,2 output with the negedge of clk_apb, 3: output with the spi_clk. Can be configured in CONF state."]
    #[inline(always)]
    #[must_use]
    pub fn d_de_mode(&mut self) -> D_DE_MODE_W<LCD_D_MODE_SPEC> {
        D_DE_MODE_W::new(self, 6)
    }
    #[doc = "Bits 9:11 - the output spi_hsync is delayed by system clock cycles, 0: output without delayed, 1: output with the posedge of clk_apb,2 output with the negedge of clk_apb, 3: output with the spi_clk. Can be configured in CONF state."]
    #[inline(always)]
    #[must_use]
    pub fn d_hsync_mode(&mut self) -> D_HSYNC_MODE_W<LCD_D_MODE_SPEC> {
        D_HSYNC_MODE_W::new(self, 9)
    }
    #[doc = "Bits 12:14 - the output spi_vsync is delayed by system clock cycles, 0: output without delayed, 1: output with the posedge of clk_apb,2 output with the negedge of clk_apb, 3: output with the spi_clk. Can be configured in CONF state."]
    #[inline(always)]
    #[must_use]
    pub fn d_vsync_mode(&mut self) -> D_VSYNC_MODE_W<LCD_D_MODE_SPEC> {
        D_VSYNC_MODE_W::new(self, 12)
    }
    #[doc = "Bit 15 - It is the idle value of spi_de."]
    #[inline(always)]
    #[must_use]
    pub fn de_idle_pol(&mut self) -> DE_IDLE_POL_W<LCD_D_MODE_SPEC> {
        DE_IDLE_POL_W::new(self, 15)
    }
    #[doc = "Bit 16 - 1: The pulse of spi_hsync is out in vertical blanking lines in seg-trans or one trans. 0: spi_hsync pulse is valid only in active region lines in seg-trans."]
    #[inline(always)]
    #[must_use]
    pub fn hs_blank_en(&mut self) -> HS_BLANK_EN_W<LCD_D_MODE_SPEC> {
        HS_BLANK_EN_W::new(self, 16)
    }
}
#[doc = "LCD delay number\n\nYou can [`read`](crate::Reg::read) this register and get [`lcd_d_mode::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`lcd_d_mode::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
pub struct LCD_D_MODE_SPEC;
impl crate::RegisterSpec for LCD_D_MODE_SPEC {
    type Ux = u32;
}
#[doc = "`read()` method returns [`lcd_d_mode::R`](R) reader structure"]
impl crate::Readable for LCD_D_MODE_SPEC {}
#[doc = "`write(|w| ..)` method takes [`lcd_d_mode::W`](W) writer structure"]
impl crate::Writable for LCD_D_MODE_SPEC {
    type Safety = crate::Unsafe;
    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
}
#[doc = "`reset()` method sets LCD_D_MODE to value 0"]
impl crate::Resettable for LCD_D_MODE_SPEC {
    const RESET_VALUE: u32 = 0;
}