Module esp32s2::sens

SENS Peripheral

Modules

• sar_amp_ctrl1
  AMP control
• sar_amp_ctrl2
  AMP control
• sar_amp_ctrl3
  AMP control register
• sar_atten1
  Configure SAR ADC1 attenuation
• sar_atten2
  Configure SAR ADC2 attenuation
• sar_cocpu_debug
  ULP-RISCV debug register
• sar_cocpu_int_clr
  Interrupt clear bit of ULP-RISCV
• sar_cocpu_int_ena
  Interrupt enable bit of ULP-RISCV
• sar_cocpu_int_raw
  Interrupt raw bit of ULP-RISCV
• sar_cocpu_int_st
  Interrupt status bit of ULP-RISCV
• sar_cocpu_state
  ULP-RISCV status
• sar_dac_ctrl1
  DAC control
• sar_dac_ctrl2
  DAC output control
• sar_hall_ctrl
  hall control
• sar_i2c_ctrl
  Configure RTC I2C transmission
• sar_io_mux_conf
  Configure and reset IO MUX
• sar_meas1_ctrl1
  Configure RTC ADC1 controller
• sar_meas1_ctrl2
  Control RTC ADC1 conversion and status
• sar_meas1_mux
  Select the controller for SAR ADC1
• sar_meas2_ctrl1
  configure rtc saradc2
• sar_meas2_ctrl2
  Control RTC ADC2 conversion and status
• sar_meas2_mux
  Select the controller for SAR ADC2
• sar_nouse
  sar nouse
• sar_power_xpd_sar
  configure saradc’s power by sw
• sar_reader1_ctrl
  RTC ADC1 data and sampling control
• sar_reader1_status
  saradc1 status for debug
• sar_reader2_ctrl
  RTC ADC2 data and sampling control
• sar_reader2_status
  saradc2 status for debug
• sar_slave_addr1
  Configure slave addresses 0-1 of RTC I2C
• sar_slave_addr2
  Configure slave addresses 2-3 of RTC I2C
• sar_slave_addr3
  Configure slave addresses 4-5 of RTC I2C
• sar_slave_addr4
  Configure slave addresses 6-7 of RTC I2C
• sar_touch_chn_st
  Touch channel status register
• sar_touch_conf
  Touch sensor configuration register
• sar_touch_status0
  Status of touch controller
• sar_touch_status1
  Touch pad 1 status
• sar_touch_status2
  Touch pad 2 status
• sar_touch_status3
  Touch pad 3 status
• sar_touch_status4
  Touch pad 4 status
• sar_touch_status5
  Touch pad 5 status
• sar_touch_status6
  Touch pad 6 status
• sar_touch_status7
  Touch pad 7 status
• sar_touch_status8
  Touch pad 8 status
• sar_touch_status9
  Touch pad 9 status
• sar_touch_status10
  Touch pad 10 status
• sar_touch_status11
  Touch pad 11 status
• sar_touch_status12
  Touch pad 12 status
• sar_touch_status13
  Touch pad 13 status
• sar_touch_status14
  Touch pad 14 status
• sar_touch_status15
  Touch sleep pad status
• sar_touch_status16
  Touch approach count status
• sar_touch_thres1
  Finger threshold for touch pad 1
• sar_touch_thres2
  Finger threshold for touch pad 2
• sar_touch_thres3
  Finger threshold for touch pad 3
• sar_touch_thres4
  Finger threshold for touch pad 4
• sar_touch_thres5
  Finger threshold for touch pad 5
• sar_touch_thres6
  Finger threshold for touch pad 6
• sar_touch_thres7
  Finger threshold for touch pad 7
• sar_touch_thres8
  Finger threshold for touch pad 8
• sar_touch_thres9
  Finger threshold for touch pad 9
• sar_touch_thres10
  Finger threshold for touch pad 10
• sar_touch_thres11
  Finger threshold for touch pad 11
• sar_touch_thres12
  Finger threshold for touch pad 12
• sar_touch_thres13
  Finger threshold for touch pad 13
• sar_touch_thres14
  Finger threshold for touch pad 14
• sar_tsens_ctrl
  Temperature sensor data control
• sar_tsens_ctrl2
  Temperature sensor control
• sardate
  Version Control Register

Structs

• RegisterBlock
  Register block

Type Aliases

• SARDATE
  SARDATE (rw) register accessor: Version Control Register
• SAR_AMP_CTRL1
  SAR_AMP_CTRL1 (rw) register accessor: AMP control
• SAR_AMP_CTRL2
  SAR_AMP_CTRL2 (rw) register accessor: AMP control
• SAR_AMP_CTRL3
  SAR_AMP_CTRL3 (rw) register accessor: AMP control register
• SAR_ATTEN1
  SAR_ATTEN1 (rw) register accessor: Configure SAR ADC1 attenuation
• SAR_ATTEN2
  SAR_ATTEN2 (rw) register accessor: Configure SAR ADC2 attenuation
• SAR_COCPU_DEBUG
  SAR_COCPU_DEBUG (r) register accessor: ULP-RISCV debug register
• SAR_COCPU_INT_CLR
  SAR_COCPU_INT_CLR (w) register accessor: Interrupt clear bit of ULP-RISCV
• SAR_COCPU_INT_ENA
  SAR_COCPU_INT_ENA (rw) register accessor: Interrupt enable bit of ULP-RISCV
• SAR_COCPU_INT_RAW
  SAR_COCPU_INT_RAW (r) register accessor: Interrupt raw bit of ULP-RISCV
• SAR_COCPU_INT_ST
  SAR_COCPU_INT_ST (r) register accessor: Interrupt status bit of ULP-RISCV
• SAR_COCPU_STATE
  SAR_COCPU_STATE (rw) register accessor: ULP-RISCV status
• SAR_DAC_CTRL1
  SAR_DAC_CTRL1 (rw) register accessor: DAC control
• SAR_DAC_CTRL2
  SAR_DAC_CTRL2 (rw) register accessor: DAC output control
• SAR_HALL_CTRL
  SAR_HALL_CTRL (rw) register accessor: hall control
• SAR_I2C_CTRL
  SAR_I2C_CTRL (rw) register accessor: Configure RTC I2C transmission
• SAR_IO_MUX_CONF
  SAR_IO_MUX_CONF (rw) register accessor: Configure and reset IO MUX
• SAR_MEAS1_CTRL1
  SAR_MEAS1_CTRL1 (rw) register accessor: Configure RTC ADC1 controller
• SAR_MEAS1_CTRL2
  SAR_MEAS1_CTRL2 (rw) register accessor: Control RTC ADC1 conversion and status
• SAR_MEAS1_MUX
  SAR_MEAS1_MUX (rw) register accessor: Select the controller for SAR ADC1
• SAR_MEAS2_CTRL1
  SAR_MEAS2_CTRL1 (rw) register accessor: configure rtc saradc2
• SAR_MEAS2_CTRL2
  SAR_MEAS2_CTRL2 (rw) register accessor: Control RTC ADC2 conversion and status
• SAR_MEAS2_MUX
  SAR_MEAS2_MUX (rw) register accessor: Select the controller for SAR ADC2
• SAR_NOUSE
  SAR_NOUSE (rw) register accessor: sar nouse
• SAR_POWER_XPD_SAR
  SAR_POWER_XPD_SAR (rw) register accessor: configure saradc’s power by sw
• SAR_READER1_CTRL
  SAR_READER1_CTRL (rw) register accessor: RTC ADC1 data and sampling control
• SAR_READER1_STATUS
  SAR_READER1_STATUS (r) register accessor: saradc1 status for debug
• SAR_READER2_CTRL
  SAR_READER2_CTRL (rw) register accessor: RTC ADC2 data and sampling control
• SAR_READER2_STATUS
  SAR_READER2_STATUS (r) register accessor: saradc2 status for debug
• SAR_SLAVE_ADDR1
  SAR_SLAVE_ADDR1 (rw) register accessor: Configure slave addresses 0-1 of RTC I2C
• SAR_SLAVE_ADDR2
  SAR_SLAVE_ADDR2 (rw) register accessor: Configure slave addresses 2-3 of RTC I2C
• SAR_SLAVE_ADDR3
  SAR_SLAVE_ADDR3 (rw) register accessor: Configure slave addresses 4-5 of RTC I2C
• SAR_SLAVE_ADDR4
  SAR_SLAVE_ADDR4 (rw) register accessor: Configure slave addresses 6-7 of RTC I2C
• SAR_TOUCH_CHN_ST
  SAR_TOUCH_CHN_ST (rw) register accessor: Touch channel status register
• SAR_TOUCH_CONF
  SAR_TOUCH_CONF (rw) register accessor: Touch sensor configuration register
• SAR_TOUCH_STATUS0
  SAR_TOUCH_STATUS0 (r) register accessor: Status of touch controller
• SAR_TOUCH_STATUS1
  SAR_TOUCH_STATUS1 (r) register accessor: Touch pad 1 status
• SAR_TOUCH_STATUS2
  SAR_TOUCH_STATUS2 (r) register accessor: Touch pad 2 status
• SAR_TOUCH_STATUS3
  SAR_TOUCH_STATUS3 (r) register accessor: Touch pad 3 status
• SAR_TOUCH_STATUS4
  SAR_TOUCH_STATUS4 (r) register accessor: Touch pad 4 status
• SAR_TOUCH_STATUS5
  SAR_TOUCH_STATUS5 (r) register accessor: Touch pad 5 status
• SAR_TOUCH_STATUS6
  SAR_TOUCH_STATUS6 (r) register accessor: Touch pad 6 status
• SAR_TOUCH_STATUS7
  SAR_TOUCH_STATUS7 (r) register accessor: Touch pad 7 status
• SAR_TOUCH_STATUS8
  SAR_TOUCH_STATUS8 (r) register accessor: Touch pad 8 status
• SAR_TOUCH_STATUS9
  SAR_TOUCH_STATUS9 (r) register accessor: Touch pad 9 status
• SAR_TOUCH_STATUS10
  SAR_TOUCH_STATUS10 (r) register accessor: Touch pad 10 status
• SAR_TOUCH_STATUS11
  SAR_TOUCH_STATUS11 (r) register accessor: Touch pad 11 status
• SAR_TOUCH_STATUS12
  SAR_TOUCH_STATUS12 (r) register accessor: Touch pad 12 status
• SAR_TOUCH_STATUS13
  SAR_TOUCH_STATUS13 (r) register accessor: Touch pad 13 status
• SAR_TOUCH_STATUS14
  SAR_TOUCH_STATUS14 (r) register accessor: Touch pad 14 status
• SAR_TOUCH_STATUS15
  SAR_TOUCH_STATUS15 (r) register accessor: Touch sleep pad status
• SAR_TOUCH_STATUS16
  SAR_TOUCH_STATUS16 (r) register accessor: Touch approach count status
• SAR_TOUCH_THRES1
  SAR_TOUCH_THRES1 (rw) register accessor: Finger threshold for touch pad 1
• SAR_TOUCH_THRES2
  SAR_TOUCH_THRES2 (rw) register accessor: Finger threshold for touch pad 2
• SAR_TOUCH_THRES3
  SAR_TOUCH_THRES3 (rw) register accessor: Finger threshold for touch pad 3
• SAR_TOUCH_THRES4
  SAR_TOUCH_THRES4 (rw) register accessor: Finger threshold for touch pad 4
• SAR_TOUCH_THRES5
  SAR_TOUCH_THRES5 (rw) register accessor: Finger threshold for touch pad 5
• SAR_TOUCH_THRES6
  SAR_TOUCH_THRES6 (rw) register accessor: Finger threshold for touch pad 6
• SAR_TOUCH_THRES7
  SAR_TOUCH_THRES7 (rw) register accessor: Finger threshold for touch pad 7
• SAR_TOUCH_THRES8
  SAR_TOUCH_THRES8 (rw) register accessor: Finger threshold for touch pad 8
• SAR_TOUCH_THRES9
  SAR_TOUCH_THRES9 (rw) register accessor: Finger threshold for touch pad 9
• SAR_TOUCH_THRES10
  SAR_TOUCH_THRES10 (rw) register accessor: Finger threshold for touch pad 10
• SAR_TOUCH_THRES11
  SAR_TOUCH_THRES11 (rw) register accessor: Finger threshold for touch pad 11
• SAR_TOUCH_THRES12
  SAR_TOUCH_THRES12 (rw) register accessor: Finger threshold for touch pad 12
• SAR_TOUCH_THRES13
  SAR_TOUCH_THRES13 (rw) register accessor: Finger threshold for touch pad 13
• SAR_TOUCH_THRES14
  SAR_TOUCH_THRES14 (rw) register accessor: Finger threshold for touch pad 14
• SAR_TSENS_CTRL
  SAR_TSENS_CTRL (rw) register accessor: Temperature sensor data control
• SAR_TSENS_CTRL2
  SAR_TSENS_CTRL2 (rw) register accessor: Temperature sensor control